asterisk users - Jul 2005 - H323 with GSM codec is not working

Hello,

I'm trying to use the GSM codec with Nufone H323 but it's not working.
Does somebody has some idea? Have I missed something?

Thanks!!
Celso Fassoni

Some additional info:
(I'm using CVS-HEAD - downloaded today)

monkey:~# cat /etc/asterisk/h323.conf
[general]
port = 1720
bindaddr = 192.168.0.100        ; this SHALL contain a single, valid
IP address for this machine
disallow=all
allow=gsm               ; Always allow GSM, it's cool :)
context=default

*CLI> show modules like chan_h323.so
Module                         Description
Use Count
chan_h323.so                   The NuFone Network's Open H.323 Channel  0
1 modules loaded

*CLI> show translation
        Translation times between formats (in milliseconds)
         Source Format (Rows) Destination Format(Columns)

        g723   gsm  ulaw  alaw  g726 adpcm  slin lpc10  g729 speex  ilbc
  g723     -     -     -     -     -     -     -     -     -     -     -
   gsm     -     -     5     5     6     5     4     -     -     -     -
  ulaw     -     4     -     1     3     2     1     -     -     -     -
  alaw     -     4     1     -     3     2     1     -     -     -     -
  g726     -     5     3     3     -     3     2     -     -     -     -
 adpcm     -     4     2     2     3     -     1     -     -     -     -
  slin     -     3     1     1     2     1     -     -     -     -     -
 lpc10     -     -     -     -     -     -     -     -     -     -     -
  g729     -     -     -     -     -     -     -     -     -     -     -
 speex     -     -     -     -     -     -     -     -     -     -     -
  ilbc     -     -     -     -     -     -     -     -     -     -     -

*CLI> h.323 show codecs
Allowed Codecs:
        Table:
Set:

*CLI> h.323 debug
H323 debug enabled
*CLI>   == New H.323 Connection created.
   -- Setting up Call
   --  Call token:  [ip$192.168.0.1:1088/4096]
   --  Calling party name:  [Celso]
   --  Calling party number:  []
   --  Called party name:  [89]
   --  Called party number:  [89]
       --Received SETUP message
Allowed Codecs:
        Table:
  UserInput/hookflash <1>
  UserInput/RFC2833 <2>
Set:
  0:
    0:
      UserInput/hookflash <1>
    1:
      UserInput/RFC2833 <2>

       =-= In OnAnswerCall for call 4096
               - Progress Indicator: 0
               - Inserting PI of 0 into ALERTING message
       Answering call ip$192.168.0.1:1088/4096
       -- Transmitting RFC2833 on payload 101
       -- Received Facility message...
       -- Received Facility message...
       =-= In OnConnectionEstablished for call 4096
               -- Connection Established with "Celso [192.168.0.1]"
       -- ClearCall: Request to clear call with token
ip$192.168.0.1:1088/4096, cause EndedByRemoteUser
       -- Sending RELEASE COMPLETE
       -- ClearCall: Request to clear call with token
ip$192.168.0.1:1088/4096, cause EndedByTransportFail
       -- ClearCall: Request to clear call with token
ip$192.168.0.1:1088/4096, cause EndedByTransportFail
-- Celso [192.168.0.1] has cleared the call
       == H.323 Connection deleted.