similar to: Mic Plugged into sound card not working

Hi, I managed to get my hand on a Xenyx x2222usb at a friend's, so I took the opportunity to do some testing with it. Pi model B, one of the more recent editions (I also had an older one from just after they were introduced and that one had trouble rebooting when attaching/detaching network so I ditched that one). Two usb onboard. Xenyx x2222usb has the same usb chip 08bb:2902 Texas

Anyone else seen this eth-device and what brings it up? [root at oh1mrr etc]# ifconfig __tmp1192348344 Link encap:Ethernet HWaddr 52:54:AB:DD:2E:D1 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2094689 errors:0 dropped:0 overruns:0 frame:0 TX packets:1645734 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX

Hello, I have a computer with this sound card (from lspci): 0000:01:04.0 Multimedia audio controller: Creative Labs SB Audigy LS Alsa is installed (maybe not properly...) # cat /proc/asound/cards 0 [CA0106 ]: CA0106 - CA0106 Live! 7.1 24bit [SB0410] at 0xc800 irq 10 But I have the impression alsa is ok : :~# aplay -l **** List of PLAYBACK Hardware Devices **** card

On Sunday 21 August 2016 15:32:55 Frank Cox wrote: > On Sun, 21 Aug 2016 14:55:50 -0700 > > j_post wrote: > > On Sunday 21 August 2016 13:50:25 Frank Cox wrote: > > > On Sun, 21 Aug 2016 13:39:29 -0700 > > > > > > j_post wrote: > > > > Sound stopped working on my CentOS 6.8 system several months ago. > > > > > > alsamixer may

Hi List, I have an ASUS G73S laptop with our favorite OS installed and all up-to-date. Sound has always "just worked" When I use the Preferences>Sound app I can setup the hardware, input, output and was overall very impressed. One can check each speaker and the laptop has a front left and right and also has a bass speaker which seems to be connected to the left rear. The various

Wine and spotify used to work. Now it doesn't, and I don't know why. Main problem is that Wine doesn't give any information back regarding why audio fails, only that it fails. When using winecfg, opening the Audio tag, choosing Alsa Driver and pressing "Test sound", a pop up reports "Audio test failed!". Nothing more. Choosing OSS, switching to emulation, same

On Sunday 21 August 2016 13:50:25 Frank Cox wrote: > On Sun, 21 Aug 2016 13:39:29 -0700 > > j_post wrote: > > Sound stopped working on my CentOS 6.8 system several months ago. > > alsamixer may tell you something useful. > When I select HDA Intel PCH, which is what it should be using, everything looks normal with one possible exception. There are three volume sliders

Hi, I just transformed an old Pentium III 500 into a headless jukebox. It's installed in the basement, near the stereo. There's only a base CentOS system on it (GNOME unchecked, package customization checked and then everything unchecked). From there on, I just installed the ALSA utils, and vorbis-tools. The machine is only supposed to do one thing (and to do it well, UNIX philosophy

Hi all, I am trying to extract from the aplay -l output the Card and Device numbers. I had a script that was working but found another motherboard that has an EXTRA word. HDA Nvidia and HDA ATI HDMI is what I am talking about below. how do I search for a line that has HDMI (which I know how to do), then ignore everything upto the device work and take the next field after that? Thanks, Jerry

When I use pulse audio and Asterisk 11.4.0 on the Console/Dsp port I get a motorboating sound or warble - or - just not clear audio. When I switch that to ALSA direct it sounds just fine. What might be happening with pulse audio that it does not sound clear??? asound.conf below. Thanks, Jerry more /etc/asound.conf # # Place your global alsa-lib configuration here... # @hooks [ {

* Enrico Minack (enrico.minack@informatik.tu-chemnitz.de) écrivait : > > I use kmix as mixer, but there is nothing in it about a > > "capture channel". How could I find where it is defined ? > then try alsamixer or amixer and watch out for capture and unmute and apply > this for the according channel (mic, line-in, pcm or master) Hum... the problem is that RH 9 uses

Hello everyone, I'm stumped on trying to get my sound card to work on my new server. #dmesg |grep snd snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 snd_hda_intel 0000:00:1b.0: irq 71 for MSI/MSI-X snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:01:00.1: enabling device

I have a number of machines using Centos 6.8 They have M-Audio sound cards. When I set the output levels using alsamixer and save using 'alsactrl store' [creating a requested directory] the settings do not restore on reboot. I have no idea why they don't. running 'alsactrl restore' works so the settings are being saved. I think the on board card settings are loaded OK

Hi, When I dial from my sip device to the extension 1234 which is linked to the ALSA console driver the call fails with the message "No channel type registered for 'ALSA'" (see below). I would like to have the console autoanswer for paging. However when I call from the console to the sip device the call completes fine. I alias alsa device hw:1,0 to card1 in /etc/asound.conf

* EvilOverlord (eviloverlord@kucs.net) écrivait : > In whatever you use as mixer control for the soundcard (alsamixer, > aumix, etc) what is set as the "capture" channel? Your soundcard may > not support capturing what is being played. If it helps : my soundcard is a ES1988 Allegro-1, the module is "maestro3". I use kmix as mixer, but there is nothing in it about a

>> See if it plays back properly. > > Running aplay as asterisk user seems to be no problem: > > asterisk at puppy$ aplay /usr/share/sounds/alsa/Front_Center.wav > Playing: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit > Little Endian, Rate: 48000 Hz, mono > asterisk at puppy:~$ aplay -Dpulse /usr/share/sounds/alsa/Front_Center.wav >

On Fri, 5 Jun 2015 01:13:50 -0500 (CDT) Michael Hennebry wrote: > The sound preferences widget on gnome says "Input volume" 100%. > There is also a row of 15 rectangles labeled "Input level". > None of them are highighted. You said you were using arecord. So what does alsamixer tell you about input level and capture? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema

I am also having an issue with no sound on some CentOS desktop systems. I manage about 3 dozen desktops. These are all Lenovo ThinkCentre systems of varying vintages, but there are only 2 distinct sound controllers among all of them: 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition

Hi u, On Thu, 22 Jan 2015, unosonic wrote: > well, sort of, with a PI, Ices2 as a client, and an USB audio device as > input, e.g. a "class compliant" audio recoder like Olympus LS5, Zoom H2 > etc., but also a little mixer like the Behringer Xenyx 302 USB. > The problem i've encountered is with USB class1 devices, i.e. so called > "full speed" USB (which is

Compiling libao on a system w/linux2.4.2 & glibc-2.0 (I think), I get an error. gcc -DPACKAGE=\"libao\" -DVERSION=\"0.6.0\" -DSIZEOF_SHORT=2 -DSIZEOF_INT=4 -DSIZEOF_LONG=4 -DHAVE_SYS_SOUNDCARD_H=1 -I. -I. -I../../.. -I../../../include -O20 -ffast-math -D_REENTRANT -fsigned-char -DAO_PLUGIN_PATH=\"/usr/local/lib/ao\" -c ao_alsa.c -fPIC -DPIC -o ao_alsa.lo In file