similar to: Which SpanDSP version to play with Asterisk 10 and T.38/T.30 gatewaying ? [SOLVED]

Hi, Maybe I missed it while checking it, but which spandsp version is recommended to play with Asterisk 10 and T.38/T.30 gatewaying ? I can see both spandsp-0.0.6pre17.tgz and spandsp-0.0.6pre18.tgz here (http://www.soft-switch.org/downloads/spandsp/) but I couldn't find a changelog documenting differences between them. So I prefer to double check ask for recommendations. Regards

I've been using spandsp and rxfax to receive faxes for a while now and over the past few days I've looked into the other side of things - txfax. I can't seem to get it working properly. I've included debug logs below of both the tx and rx side of things. I've tried three different servers, asterisk v1.0.6, 1.0.9 and CVS, FC2 and FC4, libtiff 3.5.7 and 3.7.1, TE405P and

Hello List, I have been trying to setup T38 gatewaying with the following setup SIP ->Asterisk -> DAHDI TE410P with Libss7 -> TELCO I'm using asterisk Asterisk 1.8.3.2 and DAHDI Version: SVN-trunk-r9697M Echo Canceller: HWEC I'm aware there's no support for T38 gateway but I have been trying to get the patches https://issues.asterisk.org/view.php?id=13405 to work. It seems

> From: Matt Fleming [matt at console-pimps.org] > Sent: 25 June 2014 07:39 > To: Andrew Rae > Cc: Gene Cumm; syslinux at zytor.com > Subject: Re: [syslinux] testing out 6.03 network booting... > > Andrew, could you try out syslinux-6.03-pre18? Peter pushed the release > button yesterday and -pre18 contains my change. It would be good to > know whether it improves

Where can I get the latest stable version of spandsp. That will work with res_fax_spandsp.so. The link listed on the voip-info website is dead. Any other location for download? http://www.soft-switch.org/ Thanks Bryant Zimmerman -------------- next part -------------- An HTML attachment was scrubbed... URL:

>From: Syslinux [syslinux-bounces at zytor.com] On Behalf Of Ady [ady-sf at hotmail.com] >Sent: 25 June 2014 19:32 >To: syslinux at zytor.com >Subject: Re: [syslinux] testing out 6.03 network booting... > >> > From: Matt Fleming [matt at console-pimps.org] >> > Sent: 25 June 2014 07:39 >> > To: Andrew Rae >> > Cc: Gene Cumm; syslinux at zytor.com

> > From: Matt Fleming [matt at console-pimps.org] > > Sent: 25 June 2014 07:39 > > To: Andrew Rae > > Cc: Gene Cumm; syslinux at zytor.com > > Subject: Re: [syslinux] testing out 6.03 network booting... > > > > Andrew, could you try out syslinux-6.03-pre18? Peter pushed the release > > button yesterday and -pre18 contains my change. It would be

Trying to PXE boot a Dell Optiplex 990 with BIOS A16, which has Intel Boot Agent 1.3.81 (2.1 build 089). It gets network and launches lpxelinux.0, I see the PXELINUX banner line, but there it hangs. I tried both 6.03-pre18 and 5.10, same hanging behavior. If I instead use pxelinux.0 or gpxelinux.0, either 6.03-pre18 or 5.10 or 4.07, there are no problems. The problem seems isolated to

On Sun, 22 Jun, at 06:15:50PM, Andrew Rae wrote: > > Matt - I'd love to try it - but I'm not so good at fixing compiling > issues. right now I get stuck at being unable to 'make' the efi32 or > efi64 components due to an error: Andrew, could you try out syslinux-6.03-pre18? Peter pushed the release button yesterday and -pre18 contains my change. It would be good to

Op 2014-07-23 om 17:57 schreef Gene Cumm: > On Wed, Jul 23, 2014 at 10:32 AM, Geert Stappers <stappers at stappers.nl> wrote: > > Hi, > > > > Since which version of pxelinux.0 is understood in pxelinux.cfg/default that > > > > kernel http://host.lan/netboot/vmlinuz > > > > means vmlinuz should be transported over HTTP? > > For non-EFI

On Jun 29, 2014 9:37 AM, "Wissam Shoukair" <wissams at mellanox.com> wrote: > > Hi Peter, > > I approached you before on this issue that I?m having with the SYSLINUX 6.03-pre18 when booting with iPXE option ROM. > > The issue was reproduced on different OEMs, and also on 2 different cards (Mellanox and Intel), with latest and 2 years old iPXE code. > > Just

On Jul 9, 2014 6:11 AM, "Michael D. Setzer II" <mikes at kuentos.guam.net> wrote: > > On 9 Jul 2014 at 6:01, Gene Cumm wrote: > > Date sent: Wed, 9 Jul 2014 06:01:22 -0400 > Subject: Re: [syslinux] isohybrid binary not in 6.03-pre18? (utils bt is in bios/utils?) > From: Gene Cumm <gene.cumm at gmail.com> > To: "Michael D. Setzer,

I'm having trouble getting memdisk 6.03pre18 to boot large floppies and wondering whether I'm doing something incorrectly. 1) Download http://www.fdos.org/bootdisks/autogen/FDOEM.144.gz 2) gunzip FDOEM.144.gz 3) newmkfloppyimg.sh 8 FDOEM144.img fdoem_8mb.img 4) newmkfloppyimg.sh 9 FDOEM144.img fdoem_9mb.img 5) Use following pxelinux.cfg: LABEL works LINUX syslinux/memdisk INITRD

On Thu, Jul 10, 2014 at 7:24 PM, H. Peter Anvin <hpa at zytor.com> wrote: > On 07/10/2014 04:07 PM, Alexander Perlis wrote: >> Trying to PXE boot a Dell Optiplex 990 with BIOS A16, which has Intel >> Boot Agent 1.3.81 (2.1 build 089). It gets network and launches >> lpxelinux.0, I see the PXELINUX banner line, but there it hangs. >> >> I tried both 6.03-pre18

> I'm having trouble getting memdisk 6.03pre18 to boot large floppies and > wondering whether I'm doing something incorrectly. > > 1) Download http://www.fdos.org/bootdisks/autogen/FDOEM.144.gz > 2) gunzip FDOEM.144.gz > 3) newmkfloppyimg.sh 8 FDOEM144.img fdoem_8mb.img > 4) newmkfloppyimg.sh 9 FDOEM144.img fdoem_9mb.img > 5) Use following pxelinux.cfg: > >

On 07/10/2014 04:07 PM, Alexander Perlis wrote: > Trying to PXE boot a Dell Optiplex 990 with BIOS A16, which has Intel > Boot Agent 1.3.81 (2.1 build 089). It gets network and launches > lpxelinux.0, I see the PXELINUX banner line, but there it hangs. > > I tried both 6.03-pre18 and 5.10, same hanging behavior. If I instead > use pxelinux.0 or gpxelinux.0, either 6.03-pre18 or

On 9 Jul 2014 at 6:01, Gene Cumm wrote: Date sent: Wed, 9 Jul 2014 06:01:22 -0400 Subject: Re: [syslinux] isohybrid binary not in 6.03-pre18? (utils bt is in bios/utils?) From: Gene Cumm <gene.cumm at gmail.com> To: "Michael D. Setzer, II" <mikes at kuentos.guam.net> Copies to: Syslinux at zytor.com > > On Jul 9, 2014 5:15 AM, "Michael D. Setzer II" >

Receiving a fax pstn - pstn with 1.6.2.6-rc2: -- Executing [s at incoming-pstn-line:1] Answer("DAHDI/4-1", "") in new stack -- Executing [s at incoming-pstn-line:2] Wait("DAHDI/4-1", "3") in new stack -- Executing [s at incoming-pstn-line:3] Dial("DAHDI/4-1", "DAHDI/g0,36") in new stack -- Called g0 --

On Fri, Jul 11, 2014 at 5:49 PM, Alexander Perlis <aperlis at math.lsu.edu> wrote: > On 07/11/2014 04:31 PM, H. Peter Anvin wrote: >> >> On 07/11/2014 10:17 AM, Alexander Perlis wrote: >>> >>> >>> Trace shows that lpxelinux.0 6.03-pre18 is transferred, and after that >>> there is only ARP traffic: a "gratuitous" ARP announcement by

Hello, On 23.07.2014 15:07, Ady wrote: >> Is there something I can test or help to diagnose? > > What about 6.03-pre18 (or newer)? > http://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/ 6.03-pre18 is still slow: > 16:06:07.494125 IP dell.phahn.dev.49232 > xen12.phahn.dev.57501: UDP, length 4 > 16:06:07.494250 IP xen12.phahn.dev.57501 >