similar to: Problem with detecting "Mustek PowerMust 2000VA"

On Jan 2, 2012, at 10:51 AM, Vladimir Micovic wrote: >> Bus 003 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial > Unfortunately, this device ID is used by several different vendors. What does "lsusb -vvv -d 0665:5161" show? > Also, what OS and kernel are you using? (I thought certain kernels had USB-to-serial drivers for that chip.) > -- > Charles

> Hello everyone. I try to connect four PowerMust 2000 ups's via usb to one > computer using megatec_usb driver. But megatec_usb completly ignores port > directive in ups.conf, I even try port = /dev/null and megatec_usb founds > ups and it works. The 'port' is not used for USB connected devices, it's only needed for compatibility reasons. > Problem is that

Hi, Sometime ago [ June 2018 ] I posted a message about getting trying to get NUT to work with a Power Shield Defender 1200VA UPS. This model appears in the HCL at https://networkupstools.org/stable-hcl.html That UPS reported the following when queried using 'lsusb' on an iMac running macOS [ 10.15 ] Bus 001 Device 008: ID 0665:5161 Cypress Semiconductor USB to Serial Device Descriptor:

[please keep the list CC'd. Thanks!] On Wed, Aug 13, 2014 at 9:33 AM, Marcello Vezzelli <mv at 3cx.com> wrote: > I noticed that 2 of Sweex UPS have an identical serial number 20100813, > which looks like a date. > The other one has an empty serial number. > > The blew one had the serial number, so I'm left with two different UPSes > from the serial number point of

Hi everyone, I installed latest version of Nut on Debian Wheezy 64bit. This is a virtual server hosted by VMware ESXi. It's a Nagios monitoring server. I configured one Sweex UPS in ups.conf and everything is working. ups.conf: [sweex1] driver = blazer_usb port = auto runtimecal = 1100,100,2200,50 Now I want to connect two more identical UPSes to the same server, total of 3

Bonjour, Je souheterais utilis? la version qui permet le '-x generic',mais je ne sais pas ou la recuperer car ca devrait solutionner mon probleme (cf mail ci-dessous) DaneZ _____ From: DaneZ [mailto:david.guillotte@danez.no-ip.org] To: arnaud.quette@mgeups.com Sent: Sat, 08 Jul 2006 23:24:06 +0200 Subject: Fw: INFOSEC 500 XP en USB _____ Bonjour Arnaud, Je me

# /lib/nut/megatec_usb -a myups Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] No supported devices found. Please check your device availability with 'lsusb' and make sure you have an up-to-date version of NUT. If this does not help, try running the driver with

Ok guys I get this errors: Network UPS Tools ? UPS driver controller 2.4.1 Network UPS Tools ? Generic HID driver 0.34 (2.4.1) USB communication driver 0.31 No matching HID UPS found my ups.conf is: [ap1000] driver = usbhid-ups port = auto I?ve also tried to set a specific usb port and change driver. My ups is a AMACROX 1000 http://www.amacrox.com//english/01_product/02_01detail.aspx?pdid=46

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

On Feb 18, 2014, at 10:15 PM, Charles Lepple wrote: > On Feb 18, 2014, at 5:55 PM, Thiago Tiedtke dos Reis wrote: > >> Hi, >> >> Recently I got three units of this nobreak [0]: > ... >> [0] http://www.sms.com.br/produtos/Nobreak-SMS/Manager-III-Senoidal > > According to the HCL, for the Manager III, you might want to try the blazer_ser (or in 2.7.1,

Hello, I have Mustek Powermust 2000VA USB And installed latest nut. Problem is that I cannot get info from UPS: http://pastebin.com/BtpE2Be1 I got contact with UPS via blazer_usb driver http://pastebin.com/38BZteFC Ups.conf: http://pastebin.com/KwRrz5rf Upsd.conf: http://pastebin.com/i3jNHpVj Upsd.users: http://pastebin.com/TRJ5ahWR Lsusb: http://pastebin.com/WsEbkPqG Dmesg:

On 8/15/2017 6:13 AM, Charles Lepple wrote: > On Aug 10, 2017, at 12:19 AM, Harlan Stenn wrote: >> >> 0.447497 HID descriptor length 37 >> 0.450449 Report Descriptor size = 37 >> 0.451062 Using subdriver: PowerCOM HID 0.5 >> 0.451996 3 HID objects found >> 0.453502 Path: ffa00001.ffa00001, Type: Input, ReportID: 0x00, >> Offset: 0, Size: 8,

I just purchased a Newpoint 200894 UPS and I'm interested in getting it going. It seems to use a USB to serial conversion that I'm not sure how to get running. Here's the lsusb -vvv Bus 002 Device 005: ID 0665:5161 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level)

So, I have this Mustek Powermust 600USB (no serial port) here temporarily. It seems to be a hid device. The output from "lsusb -v" and "newhidups -DDDDD" (with "generic" and "vendorid=06da") are (respectively): ----------------------------------------------------------------------------------------------- Bus 001 Device 002: ID 06da:0003 Phoenixtec Power

G'day, New toy, came with bundled software which is non-free, so I'm looking at whether NUT can be convinced to play with the toy. I've never used NUT before. OS name and version: Ubuntu 10.10 exact NUT version: 2.4.3-1ubuntu5 NUT installation method: Ubuntu package nut exact device name and related information: PowerShield Centurion 2000

Hi all, I've bought UPS FSP EP 850 because I have similar UPS, FSP EP 1000. It is working on my other server with with Fedora 14, kernel 2.6.35.14-106.fc14.x86_64 and installed nut-2.6.2-1. My new UPS is detected by kernel (see below lsusb output) and is partially detected by blazer_usb driver also. But it doesn't communicate with driver (see below blazer_usb output). I run all

-----BEGIN PGP SIGNED MESSAGE----- Hello, I leave a mail here because I can't find any solution in order to get the nut working with this UPS despite I search everywhere on the net. I've bought this UPS recently after that an MGE-UPS Ellipse 1200 USB burn. I've those information about the UPS : Reseller link : http://www.alpha-power-technologie.com/images/GPi-usb.pdf In his

-----BEGIN PGP SIGNED MESSAGE----- Hello, I leave a mail here because I can't find any solution in order to get the nut working with this UPS despite I search everywhere on the net. I've bought this UPS recently after that an MGE-UPS Ellipse 1200 USB burn. I've those information about the UPS : Reseller link : http://www.alpha-power-technologie.com/images/GPi-usb.pdf In his

Hello all: I have a Yukai PowerMust 1000 USB and it used to work on another computer using megatec_usb driver. Now, I have it in a new computer, but the driver does not detect it. It is there: # lsusb|grep Cypress Bus 006 Device 007: ID 0665:5161 Cypress Semiconductor USB to Serial Permissions are OK: # ls -l /dev/bus/usb/006/007 crw-rw-r-- 1 root nut 189, 646 ago 8 01:51