similar to: CentOS-announce Digest, Vol 82, Issue 14

CentOS Errata and Security Advisory 2011:1849 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1849.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0d618681dcf0320b7738d61755176f29f5a1b420bff4da8935100f552e1025df kernel-2.6.32-220.2.1.el6.i686.rpm

CentOS Community, Is there a command to boot into a different version of the kernel? I believe this is setup via grub.conf but unsure. There are a few different kernels loaded into /boot but I want to see if there is a command to boot into a different kernel as a single instance or permanent if needed. Please advise [root at titanium boot]# ls -ltr total 62768 -rw-r--r--. 1 root root

I have a machine with a recent install of centos (2.6.32-220.2.1.el6.x86_64 kernel). It crashed 3 times this week, and sent emails like the one below complaining about kernel taint. I've gone back to a previous kernel to see if that helps, but otherwise I don't know how to investigate this. What should I do? Here's stuff from the log and one of the emails:

Hi everyone! :-) I have a problem with making a wireless USB dongle work under CentOS 6. The dongle is known to not work natively under Linux and last time I used it (cca 3 years ago) I managed to get it working using ndiswrapper. This time I was hoping to make it work again in the same way. But the "yum install kmod-ndiswrapper" reports the following (among other regular stuff):

CentOS Experts, I am receiving the following in /var/spool/mail/root. I cleaned out the file and then rebooted and the same errors came back. Is it possible to analyze the data and advise if there is an issue with my system? This is a completely fresh install. From user at localhost.srv.net Tue Jan 17 08:11:56 2012 Return-Path: <user at localhost.srv.net> X-Original-To: root at

CentOS Community, Would someone who is familiar with reading boot messages and kernel errors be able to assist with advising me on what the following errors might mean in dmesg. It seems to come up randomly towards the end of the logfile. ------------[ cut here ]------------ WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:467 generic_get_mtrr+0x11e/0x140() (Not tainted) Hardware name: empty

Hello, is anyone experiencing this ? I have a sympa process (bulk.pl) which triggers this bug: ------------[ cut here ]------------ WARNING: at kernel/sched.c:5914 thread_return+0x232/0x79d() (Not tainted) Hardware name: X8DTU-LN4+ Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6

Hi, I'm running CentOS 6.2 x86_64 as xen guest on a CentOS 5.7 dom0. The host is running 2.6.18-274.7.1.el5xen, the guest 2.6.32-220.2.1.el6.x86_64. Memory for domU is set to 1024 MB and "xm list" shows these 1024 MB. But "free -m" on the guest system shows only 652 MB. When I set up a CentOS 5.x guest with 1024 MB "free -m" shoes 1024 MB. Anyone else seeing

I'm running CentOS 6 x86_64 domU on CentOS 5 x86_64 dom0 The host is running 2.6.18-238.19.1.el5xen The guest is 2.6.32-220.2.1.el6.x86_64 'xm list' on the host shows 512mb memory allocated. 'free -m' in the guest shows 224mb memory. 'xm mem-set 21 1024' (21 being the domU ID), 'xm list' now shows 1024mb, but in the guest I now see 736mb. Anyone else seeing

Greetings, I am getting the following error when I start the Virtual machine manager [root at centos Desktop]# uname -a Linux blah.blah.blah 2.6.32-220.2.1.el6.x86_64 #1 SMP Fri Dec 23 02:21:33 CST 2011 x86_64 x86_64 x86_64 GNU/Linux Error polling connection 'qemu:///system': internal error Cannot find suitable emulator for x86_64 Traceback (most recent call last): File

Hello, Need anyone's help regarding issues I encountered during make on iscsitarget-1.40.20 which I get from "svn co https://iscsitarget.svn.sourceforge.net/svnroot/iscsitarget/trunkiscsitarget" checkout revision 481 Issues where found below after a series of my command, as shown: [junix at thesisQRMproject iscsitarget]$ make *cc:

Hi, i want to send mails direct into a public folder. If i send an email via my local postfix the mail will be handled as a normal private mail. Dovecot does create a mailbox in the private Namespace and do use not the mailbox in public one. I hope you can help me with my little problem. Here sone informations about my configuration: [root at imap1 etc]# ls -la /var/dovecot/imap/public/

I installed Centos 6.2/i386 on a machine last night with a 1920x1080 monitor. The installer ran in graphical mode and looked fine. After the install was finished I rebooted and ran through the "firstboot" stuff (set up user, etc) with no problem and, again, it looked good. After that, when I should have seen the gdm login screen, all I got was the blue background but not the box with

Hi, I have a Junghanns QuadBri installed and seems to be detected and working correctly using the wcb4xxp driver All ports are configured as TE The problem is when I connect an ISDN line - the LED turns green and Dahdi status shows Alarm OK But when I try to make a call I get "All circuits are busy" cause 27 I have searched and web and tried numerous configs but it doesn't want to

嬥堜桪巕偲怽偟傑偡丅 撍慠偺儊乕儖憲怣丄怽偟栿偛偞偄傑偣傫丅 僗億儞僒乕僒僀僩條傛傝擇恖偺彈惈偺徯夘埶棅傪庴偗傑偟偨偺偱丄 偛埬撪偝偣偰偔偩偝偄丅丅 堦愗椏嬥柍偟偺偛徯夘偲側傝傑偡丅 儊乕儖偺憲庴怣傪娷傔丄偳傟偩偗棙梡偟偰捀偄偰傕柍椏偱偡丅 姰慡柍椏偱偺偛徯夘偱偡偺偱憗婜掲傔愗傝偺応崌偑偛偞偄傑偡丅 傑偨丄掲傔愗傝偲側偭偨偲偒偼梊崘側偔彈惈偺曄峏傪偡傞応崌傕偛偞偄傑偡偑丄 偛梕幫偔偩偝偄丅 僋儕僢僋佀丂http://chestnut.happydeeds.com/a12/

Hi, I have two DSL line from the different provider connected to my Linux Router Firewall. Server_A is behind the Linux Router Firewall. DSL0 -- | ---- LINUX_ROUTER_FW -- SERVER_A DSL1 -- I have the following IPTABLES command to make incoming access to Server A''s web service throught port 82 as below: - $IPTABLES -t nat -A PREROUTING -i eth1 -p tcp --dport 82 -j DNAT

If I use Asterisk to initiate two call legs with a callfile, dialing the channel and setting the extension to an AGI that dials another channel, and both dial by SIP connection to a switch that allows only G.729, do I need a G.729 codec running on Asterisk? Do I need 2? And if I use the callfile to connect by SIP to a switch that allows only G.729, then use the extension AGI to play a file

> he graphics card is emulated in Qemu, the graphics operations are > converted to VNC commands there, and you see on the VNC display what > would appear on the Windows VGA display. OK, Thanks. 2 other questions: 1. how do I connect tzo the VNC server for my domU OS? 2. Where is the QEmu code? In xend or in kernel? -jec Jean-Eric Cuendet Senior developer / Technical support

Hi, I get the error message isolinux: Disk error 01: AX=4200, drive 82 booting the new College Linux CD on my Dell GX100. What does this message mean, and what is the recommended workaround? Please cc me on any replies; I'm not subscribed to this list. Thank you for your help. --jkl

thanks for your reply but i think ${BRIDGEPEER} will work only when both channels are connected. i want to get channel-id before dialing so that i can dial using that channel id. > ${BRIDGEPEER} is probably a good way to do what you want.. if Channel > A calls Channel B, and you want Channel A to "get" the channelID of > Channel B, as long as the two channels are bridged,