similar to: Please Help!!!

Hi folks! First post here, so please don't bother if it's not the right place to post those kind of questions. I'm currently running a 4.7-release (upgrade to 4.8 planned but not yet started) on my production box. As I would like to setup a small WLAN (major use for my notebook, other clients are possible) I need to know which cards are really supported. The handbook is IMHO not

I just got the D-Link DWL-G520M PCI wireless card. I'm not interested in super-G or any other post-802.11b feature in particular; the reason I got it was because the marketing materials hinted that (at least some revision of it) had the Atheros chipset. It isn't recognized at all by ath(4) on 5.5. Here is the pciconf -lv section: none0@pci0:14:0: class=0x020000 card=0x3a681186

Hi, after some time without FreeBSD I installed 7.1 on an IBM Thinkpad T30 (with ZFS root on encrypted geli, works great). Config is: FreeBSD hasking.alashan.nongo 7.1-STABLE FreeBSD 7.1-STABLE #3: Thu Feb 5 21:10:45 CET 2009 root@hasking.alashan.nongo:/usr/obj/usr/src/sys/HASKING i386 I tried using my ath based D-Link DWL G650, which still seems to have some issues in regard to interrupt

Good morning, I've inherited an old laptop from my wife that I'd like to use when I travel (it's fairly small with a 12" screen). The bad part is that it is maxed out on memory with 384MB. Has anyone played with using Centos5 on systems with little memory? Ideally, I don't need too much - Firefox, Openoffice, a little Perl/Python/C here and there. I was thinking about using

Hi, I'm working on a Wifi VoIP project specification. It will have almost 8 APs and 20-30 wifi phones. And after some research, I still having some questions ... 1) Are Managed Access Points (and switch controllers) really important to implement good wifi woip (w/ low latency and acceptable handover time) ? 2) What is the difference between (3com WX1200 + 3com AP 3750) and (DES-1228P +

I'm trying to bridge a wired network and a wireless network, but I'm having some trouble. No traffic seems to be passing through the bridge. When I issue a "showmacs" command to brctl, I am able to see MAC addresses from both networks. I am also able to ping both networks from the bridge machine. When I issue a "showstp" command to brctl, the wireless access

Does anyone know of an easy to install/use WIFI PCMCIA card for Linux. I am currently running Cent OS 4.0 on my laptop and I have a D-Link DWL-G650 Ver B which will run off of the madwifi Beta drivers. Now I know I can get this to work but I would feel a little better using software that is in production development. Any suggestions and input would be helpful on my new card purchase. The card

Hello I wonder how I could get my linux box to serve logins to a Windows Me box. At the moment samba is running but I cannot access home dirs (No user log on). Since ME (wireless card DWL+G520) accesses an AP (DI 624 - 192.168.0.1 + ADSL) and the card manager comes up at end of the booting process, I have no idea how to get a user log on box (To be honest I don't know if this is

Hi All, After hours of reading and trials, I got the following setup working... 1. Dell Axim X30 PocketPC with 802.11b wireless using DHCP with Open WEP -- successfully connected to --> 2. Laptop with DLink Airplus DWL-650+ PCMCIA wireless with ndiswrapper v1.1 driver with network bridge (wired + wireless) and running a DHCP server listening on interface br0 (eth0 + wlan0) Here is the

Sorry for such a long post as my first to the list, but in an effort to forego a long back and forth question/answer session via email, I think if I post all the information that I currently have someone may be able to more quickly spot my issue. The server in question is a Gentoo server running Samba 3.0.11. The basic problem is that when person A opens an AutoCad file, person B is unable to

Hi all, I have trouble with making the symbolic link to the corresponding device node. I have typed sudo In ~/.wine/dosdevices lrwxrwxrwx 1 username d: -> /mnt/cdrom but it gives me this error : prawira@ubuntu:~/Warcraft III$ ln ~/.wine/dosdevices lrwxrwxrwx 1 d: -> /mnt/cdrom bash: /mnt/cdrom: Permission denied prawira@ubuntu:~/Warcraft III$ ln ~/.wine/dosdevices lrwxrwxrwx 1 d:: ->

I'm about to start working with WiFi phones on my Asterisk installations. Can anyone tell me if they are using WiFi phones on wireless network that is extended with WDS and how well the phone handles jumping from access point to access point while on a call? Do any WiFi phones support WPA encryption or are they all still under the impression they are only being used on public hot spots?

OK What client cards do work? For each of the following: 802.11a 802.11b Media: PCI PCMCIA USB OS: FreeBSD 4.7 Recomendations please Thanks David ----- Original Message ----- From: <john@critchley.biz> To: "vizion communication" <vizion@ixpres.com> Sent: Monday, April 14, 2003 2:04 PM Subject: Re: Annother Wireless network card annother problem > > > > I

i have read everything i can find relating to this and i got nothing i have ubuntu 11.04 wine 1.3.15 amd athlon x2 dual core QL-60 ati radeon graphics card 3100 i belive at first i was running wine 1.2 and i got the water glitch. trolled for a while and updated the version to 1.3 now WoW wont load after pushing the play button on the loader. after more looking i fount that wine 1.3.26 will work

I want to build 2 servers (both running samba) to provide file storage to 2 offices (approx 100 miles apart, linked via DSL) but all data writen to 1 server must also be saved to the other server. Both servers would also allow users to access the data via a VPN thus allowing 1 office with a failed server to access the other server via the vpn and still see the data from both offices. I currently

Hello, all. Wine's Notepad captures my keyboard input perfectly, but nothing else does. All the software I've installed so far is silver-rated and up on the AppDB (except for some small programs that aren't even there... I'll add entries just as soon as I get this fixed). This includes, for example, Bulk Rename Utility, Warcraft III: The Frozen Throne and World of Goo, all three

I have a Samba PDC and a file server (domain member). They are both running CentOS 4, with Samba3-3.0.24-30 and LDAP 2.3 (on PDC). Domain authentication seems to be running fine and file access on the file server works also. I have one share on the file server that gives me trouble. Whenever I access files from this one directory, the network seems to lock up for close to a minute. I get 64%

Hi, I am from Brazil so my english is not good but I will try speak correct. My problem is my Warcraft. I can run him. I've tried all and in the end I get the same result: [Image: http://img4.imageshack.us/img4/6027/waarcraft.th.png ] (http://img4.imageshack.us/my.php?image=waarcraft.png) This SS is my Warcraft in my ubuntu 8.10, and is to much LAG!! I don't know what I have to do to

Hello everybody. I want to play Warcraft 1 on my Ubuntu 8.04 (wine-1.1.1). But first of all, i get this error: Code: winevdm: unable to exec 'Z:\Warcraft\SETUP.EXE': DOS memory range unavailable Then i have read PreloaderPageZeroProblem. Now the error has changed to: Code: Not enough memory on exec What can i do to get Warcraft 1 to work? thanks Sorry for my bad English.

Hi, I've got a problem considering wine, and no one seem to be able to help me at my distro-forum, so I'm trying this. This is my problem: I having some difficulties running Warcraft 3. I have several games running flawless in wine (Diablo 2, Starcraft, Fallout and others), but running warcraft 3 is too slow. I have seen in other threads on this forum that one needs opengl to run it