similar to: [HCL] MGE Pulsar Evolution 1100 - not recognized by USB driver

Hi all, Have been using Nut on Linux for over ten years now and find it brilliant. Thanks. Just upgraded to 2.4.2 and have the 5 or 6 models of UPS's that we use (apcsmart, megatec, mge-shut, surgemax, digitus) all working including the MGE Pulsar Evolution 1100 on a USB connection using the usbhid-ups driver. Running on SLES9. Old but we still have a few servers out there running

I have an MGE Pulsar Evolution 1100 connected to a Debian box, with nut-2.0.1 (the standard "sarge" packages). I have it connected through USB, and I'm using newhidups. However, about once a day the driver looses contact with the UPS and I have to restart NUT to get it to drop the "data stale" nonsense (it happens more often than this, but most times it recovers without

Hi, I am trying to talk to an MGE Pulsar Extreme UPS over RS232 with the mge-shut driver but I'm having some problems. It appears to init OK but I can't, say, turn the outlets off, eg.. harrow:~>upsc mge@localhost battery.charge: 78 battery.charge.low: 20 battery.runtime: 05760 driver.name: mge-shut driver.parameter.port: /dev/cuad1 driver.version: 2.0.3 driver.version.internal: 0.65

Dear Sir, I am attempting to get a Broad Band Modem working on: sony# uname -a FreeBSD sony.family.hom 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #2: Tue Dec 19 16:55:50 EST 2006 root@sony.family.hom:/usr/obj/usr/src/sys/SONY01 i386 The device is a Sprint PC5740 pc card. When I perform a "man umodem" the card is listed (vendor = Curitel) UMODEM(4)

Hi all, I'm currently trying to install a APC Back-UPS ES 700 on FreeBSD. This UPS has a usb connection to the PC and is recognized as: ugen0: APC Back-UPS ES 700 FW:829.D2 .I USB FWD2 rev 1.10/1.06, addr 2 my ups.conf looks like: [back-ups] driver = usbhid-ups port = auto desc = "server" When I now run /usr/local/libexec/nut/upsdrvctl start the output is: Network UPS Tools

Hello all! I've been trying to get my UPS working with my OpenBSD stable box and I haven't had any luck yet. dmesg shows that I have something from Powerware usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 biomask f5fd netmask fffd ttymask ffff ugen0 at uhub0 port 1 "Powerware Powerware UPS" rev 0.20/0.50 addr 2 nut version

On 9/28/06, Ingo Schaefer <ingo@ingo-schaefer.de> wrote: > Hallo, > > I installed nut 2.0.4 on a Solaris 8 and tried two things: > > First I wanted the ups to connect via usb, but I could not compile the > usb drivers. Make usb told me: no target named usb found Do you have libusb installed? (I was not aware that there was a port of libusb for versions of Solaris before

Hello all, I wonder if the improvements to a driver called "newmge-shut" which have been mentioned in October 06 got it to the 2.0.5 release? I tried my setup again with this release and still get this "communication lost -> established -> lost -> established" cycle. USB was not working because of the Solaris 8 installation. Regards, Ingo -------------- next part

Hello, My MGE Pulsar Evolution 800 had some hardware troubles (it may be the batteries according to the manual). The fault was not detected so the power was cut to the load and nothing appears in the log files. Arnaud: do you know if the UPS have some way to report this kind of troubles to the PC so that NUT can handle it with a shutdown sequence ? Philippe

Hello, I'm trying to communicate with a MGE Pulsar STS 16 using nut under Linux, but I've had no luck so far. I haven't saw it supported in the doc, so if there's anything I can try... Thanks, Arnaud. -- Perso: http://launay.org/blog/ H?bergement: http://www.nocworld.com/

hello, I tested all config with my ups and psp all seems to be OK now, I had change ups name and user name in ups.conf, upsd.users, upsmon.conf etc etc ... but I have quickly these events in my syslog without doing anyting what can I do ? Nov 15 11:09:22 mezenc upsmon[3865]: Poll UPS [pm2200 at localhost] failed - Data stale thanks a lot for your help Sabine GOUDARD Ecole Nationale

On May 26, 2014, at 4:05 AM, "Daniel O'Connor" <doconnor at gsoft.com.au> wrote: > I've looked in upsc, upsrw and upscmd but none seem to have a suitable option. Is there a "battery.test" command, or similar?

On May 26, 2014, at 8:21 PM, Daniel O'Connor wrote: > However if I do either of the tests upscmd just reports 'OK' and nothing happens. Anything in syslog? These commands should result in a self-test similar to the periodic one (the Evolution 500 does it every two weeks), but the "OK" from upscmd doesn't actually wait for the command to be executed. -- Charles

Hi, My UPS is MGE Pulsar Ellipse Premium 1200VA, connected on USB port, usbhid-ups driver. Using simply KNotify about UPS connection states I noticed that sometimes unpredictably a notification appears that the USB connection to the UPS is lost and a few seconds later another notification appears that the connection is restored. And this repeats to infinity. The only way to get out of it is to

On 26 May 2014, at 23:26, Charles Lepple <clepple at gmail.com> wrote: > On May 26, 2014, at 4:05 AM, "Daniel O'Connor" <doconnor at gsoft.com.au> wrote: > >> I've looked in upsc, upsrw and upscmd but none seem to have a suitable option. > > Is there a "battery.test" command, or similar? There are these commands.. test.battery.start.deep

We have several systems in remote locations and I have found that the ones in the US are having issues.. We are an Australian company and can't source a 110V UPS locally so we arrange to have one bought for the site when it's installed. It seems that in the US we are getting "Pulsar EX 1500" UPSs but locally we buy "Pulsar 1500". NUT seems to work find with the

I am running NUT 2.2.0 compiled from the FreeBSD ports tree. [inchoate 14:50] ~ >upsc ups1 at localhost battery.charge: 59 battery.charge.low: 20 battery.charge.restart: 0 battery.runtime: 6350 battery.type: PbAc battery.voltage: 43.0 driver.name: usbhid-ups driver.parameter.offdelay: 120 driver.parameter.ondelay: 13 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version:

On May 27, 2014, at 9:59 PM, Daniel O'Connor wrote: > > On 28 May 2014, at 10:54, Charles Lepple <clepple at gmail.com> wrote: >> On May 26, 2014, at 8:21 PM, Daniel O'Connor wrote: >> >>> However if I do either of the tests upscmd just reports 'OK' and nothing happens. >> >> Anything in syslog? > > Not that I can see :( >

Hello, I 'm trying to set up an Eaton PW5110 using nut-2.4.1 in OpenBSD, my ups.conf follows : [myups] driver = bcmxcp_usb port = auto desc = "Eaton PW 5110 (1500VA)" My first attempt to run upsdrvctl ended up complaining about unimplemented usb_clear_halt() in libusb. I patched libusb-0.1.12 with the following patch :

Hi, folks! There is FreeBSD 7.1, NUT 2.4.1, UPS APC Smart 2200 XL. NUT is compiled from ports with following options: --------------------------------------- _OPTIONS_READ=nut-2.4.1_5 WITH_SERIAL=true WITH_USB=true WITH_SNMP=true WITHOUT_NEON=true WITHOUT_PDU=true WITHOUT_HAL=true WITHOUT_IPV6=true WITHOUT_CGI=true --------------------------------------- UPS is successfully recognized by OS