similar to: Mapped Samba drive slows Windows Explorer

List, The D'Link phones are not reliable at this time. I am trying to get them fix their Firmware to my specifications. It is half done so far. However there are still hurdles. below email is self explanatory. At present if you want to use these phones, you need to buy D'Link's SIP Server and run this as one of your SIP servers in the blend to call to Asterisk. Seshu Kanuri "G

Hello, I've successfully installed Asterisk from last CVS and configured it for using with DLINK-DG104S as mgcp CPE and PGW2200 as external sip server. All are work fine at G711 codecs, but then I disable all codecs except g729 some calls failed (Not all calls. Some calls passed at g729 succesfully). All my devices configred to use only g729 and I don't see other codecs at mgcp or sip

I am have trouble getting caller id to work here is my current mgcp.conf am I missing something? ========================================================= Mgcp.conf [general] port=2427 [Egraph-1] ;dlink 104s-1 host = 12.151.207.2 context = local line => aaln/1 callerid = "jim's office 1" <321> line => aaln/2 callerid = "jim's office 2" <322>

hi all I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h software can only be configured to point to a gatekeeper. I know I don't need to do this, but it's a test before I setup my Symbol Netvision phones (I don't have an access point for them now). First, this is what I have, and what

Hi, I have a dlink dvg-1120M (mgcp) box that i will like to use with asterisk. Is it possible? has anyone done that? Here's a link to the product page at dlink. http://support.dlink.com/products/view.asp?productid=DVG%2D1120M Also, does anyone has or know where to get the firmware for Dlink DVG-1120S (sip model)? thanks. -- Zahid

hi seems like things are closing in to something that might look like success. I have one problem left: I don't get ring indicator when I dial out from the h.323 phone... Sound is good, so it doesn't look like a codec problem. I'm using chan_capi with early B3. I also use gnugp to route the calls from the phones to asterisk, as the dlink dph-100h requires this. Debug output follows:

Hi, Xenoprof buffers are mapped into the kernel using direct_kernel_remap_pfn_range(). I need to unmap the buffer when it is not needed anymore. However, I could not find any function that unmaps pages previously mapped with direct_kernel_remap_pfn_range(). Any suggestion on how to do this? Thanks Renato _______________________________________________ Xen-devel mailing list

Hi, I'm using OH323, mostly with success, to interface Asterisk to a provider's switch (World Telecom INX). I have noticed a particular effect, and I wonder whether anyone else has seen the same? The effect is audio flutter (almost like the flutter one gets on MF or HF radio sometimes) which only happens intermittently. Audio coming into Asterisk is unaffected, as proved by using the

This sounds more like an Windows problem, but it is an interaction with Samba and I'm hoping someone has an idea of where to start looking. 3 times in the past week I've had a user (different user each time) come to me saying their P: drive is inaccessible, access denied. The P: drive is set in the user's Active Directory Profile as their home directory \\sambaserver\home$\%username%

Anyone know how to set up port forwarding of multiple ports on a DLink DI-604? I successfully portforward the SIP port on the Advanced|Virtual Server page. It works because I can register a SIP client, but it's a single port - 5060. The DLink doesn't seem to provide an obvious way of portfarding the 10000 - 20000 ports needed for RTP. Any ideas? Hugh

Hi, I have the setup of my xp100 plugging into my dlink gateway that i use with a voip provider. I notice that when someone calls my pstn # that goes to the asterisk box it works but when they hang up asterisk does not recognize the hangup. What needs to be done to make it work with a dlink gateway. when i plug the xp100 into my land line jack everything works fine and the xp100 reconizes

Hi all, A while back, there was a short thread on using the FXS interface from a Primus TalkBroadBand device (a DLink ATA) as a incoming line for the FXO interface on the TDM400P: Primus <--> DLink ATA FXS <--> TDM400P FXO <--> Asterisk In that thread, a couple of people suggested that this does not work reliabley, and the ATA FXS <--> TDM FXO link 'goes

I had just found a Dlink DVG-1120 on ebay and I'm curious if anyone has used you it with asterisk. They were only $65. I have tested with the Linksys Pap2 and found that box to be fairly nice except for a lot of backgound/white noise. I was wondering if any else had experienced that? Let me know if I've wasted $65 on the Dlink and also if you had similar experience with white noise on

If you look at the specs on the Dlink box that Primus gives you, you will see that it is SIP. I am sure Primus has a SIP platform because we have played with it. We managed to use it on MSN's SIP phone as well as couple Zultys ZIP2x2 hard phones. Their PC-Phone app is also a SIP soft phone. If you are registering to sip.iprimus.net then it is definitely their SIP platyform not MGCP.

Thank all for fast help in my question. Anybody use DLINK 570 TX with 4 ports ? It was developed to NT, Does it work with Linux? Thanks Gilberto Braz

We have a large install of 360's running rev 4.1 with zero problems. I did another, smaller install couple weeks ago with 40 360's running rev 5.3. In both cases, the install was identical, same Asterisk version, same dialplan, everything the same except the differences were: 1. Different firmware rev 2. Different physical LAN Guess what? On the smaller install, lockups and reboots.

Well i did it, i finally broke down and bought a hardware based media player, the dlink dsm 320. Not only can i watch my dvds from my pc, but listen to my 30+gb ogg vorbis collection, create a playlist file (.pls format) with shoutcast and icecast2 streams (mp3 only) and crank them through the home theatre system. Just a heads up though, even though it supports shoutcast and icecast2 mp3, the

I have built Asterisk on SuSe Linux 7.3 on an Ultra 2 Sparc WorkStation. I am listing the modification I had to do for the benefit of anybody else who wants to use Asterisk This workstation is equipped with one 400 MHz RISC UltraSparc II CPU, 256 MB RAM, Two 9 GB 10,000 RPM UltraSCSI Disks. I have a gatekeeper running on this machine, I had to do the following modification to build * on Sparc:

Hello Situation: I'm moving from a windows XP box to fedora 11. I used winXP to run skype with a dlink dph-50u USB adaptor so that I could talk on skype with my regular phone. Been working fine for months I'm now on fedora 11, able to run skype linux without problem, even the webcam work! Problem, cannot make the dlink dph-50u to work. After a lot of googling, cannot find anything. I

Primus in Canada has launched a SIP-based service to replace your business and residential POTS lines with a VoIP version. It's called TalkBroadband and it looks killer: http://www.primus.ca/en/residential/talkbroadband/index.html Basic service for $20 Cdn a month!! Local number portability!! Cheapo Primus LD rates!! They don't care where geographically you plug it in!! When you sign