similar to: net use h: /home syntax?

Hello, * After some good advice from the list, I now have my workgroup visible. Next problem. I click on it from my win98 station (yes, it is old; I even have a w95 workstation somewhere :-) ) and I get "can't find share name". Now I look in the samba logs, and I see that it is looking for /usr/local/samba/netlogon, which doesn't exist. Oops, error! The netlogon happens to

The subject says it all, I think. At home I have a PDC (Linux with Samba), and I have Win98 and Win 95(!) clients. And sometimes the domain name (workgroup name) is visble in the Network neigborhood, and sometimes it is not. I also got the impression that placing a link in the file NETHOOD makes a difference, but I am not sure yet. The PDC is visible, that is, it can be PINGed, I can connect

Hello, * When I am running a backup bash file under cron, I get lots of messages like the following: rsync: recv_generator: failed to stat "/mnt/tmp/backup/museum/documenten/secretariaat/vrijwilligers/medewerkersboek en poster/losse foto's medewerkers/oude foto's medewerkers die we willen bewaren/wienk, ari\#303\#253l .jpg": Invalid or incomplete multibyte or wide

I have posted more messages, essentially to the same effect... had quite a few good answers, but somehow I seem to be missing something ... :-( Well, I told you already about the workgroup DAARO, which refused to show up... I got some suggestions, and, indeed, there it was! I could even log in to it. And then, next morning, I started up my test network, ... no DAARO. However, after a restart

Hello, * I am setting up a backup on a Linux system with Windows XP workstations. The backup goes to three alternating usb drives, each of which is NTFS formatted. The disks should be virtually identical but they do not seem to be. First, my mount command is this (I edited a bit for brevity) mount -t ntfs-3g -o locale=nl_NL.iso-8859-1,silent /dev/disk/by-id/usb-DiskA \ /mnt/tmp || mount -t

I am less than familiar with Microsoft, so I guess it might be an FAQ... if I click on "network neighborhood" which reveals a Samba server, it shows a list of all shares. If I click on a share, I get a message "cannot find share name". Somehow this does not sound logical to me... what is wrong?

Even if I can find back a share, (which I sometimes can, for no clear reason) then the next message I get is "no access". I suspect this may be a Linux config thing, but I am still unable to figure what ownership rights I should give to the shares: root:root or someuser:users or samba:samba (this user:group does not exist as yet). What is meant by no access: is it a Windows or a

Well, I read quite a few documents; thanks for pointing them out... And I got "it" working... The most important point I learned is P_a_t_i_e_n_c_e! You really have to wait a few minutes after having modified your smb.conf and restarted samba. And you have plenty of time to reboot your client, I am not sure whether you really need this, but anyway... it really takes quite some

Hi, A pre-release version of backgroundrb is available now from svn. Download it from here: http://svn.devjavu.com/backgroundrb/branches/version099/ Since this release marks significant migration from existing practices, i intend to keep trunk untouched for a while. There are no install scripts, but you should copy "backgroundrb" file from script directory of plugin to script

Hi folks I am a complete noob to this Ubuntu stuff, so please forgive me if I ask a dumb Question, or ramble on.... I have been told that I am trying to run before I can crawl, but here goes..... I have a few old Windows programs that are no longer supported or run correctly on Vista or Win7, but work happily in XP. These are used for my business and are mission critical. The two main ones are

Hi, I am backing up about 500G of data from a linux-based NAS to a USB hard drive attached to a router (rt-n16 with tomatousb firmware). Both NAS and the router have rsync-3.0.9. The router is running rsync in the daemon mode. To test the set up, I rsync'd the files to the empty USB hard drive, then back to the NAS in a new temp dir. Afterwards, I did a local "diff -r" on the NAS.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Russ, Digant, *! Several times on the IRC channel I noticed people having problems getting to grips with the interaction of scopes when using template nodes[1]. Typically this looks thus: | node genericwebserver { stuff } | | node ''web01.example.com'' inherits genericwebserver { | $influence_genericwebserver =

I have sent a few messages already, but perhaps I should start from the other side, and give a clear indication of what I want to achieve. Well, here goes... I am working for a volunteer organization. They have quite a few Windows workstations, most W98, and a few XPs (and, currently, one Vista). There is one Linux server, running Samba, and holding all shares. It also acts as the PDC, and

How do you clean up your app folder to place onto the server? I want to get rid of all the .svn stuff. Seth Buntin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://wrath.rubyonrails.org/pipermail/rails/attachments/20060317/cc81d9f7/attachment.html

On Thu, Apr 17, 2014 at 11:03:57AM -0400, Waiman Long wrote: > +#if !defined(__LITTLE_ENDIAN) && !defined(__BIG_ENDIAN) > +#error "Missing either LITTLE_ENDIAN or BIG_ENDIAN definition." > +#endif This seems entirely superfluous, I don't think a kernel build will go anywhere if either is missing.

Hi! AFAIS the incoming SUBSCRIBE is handled in the same context as INVITE - but how should I handle the SUBSCRIBE in the context? thanks klaus SUBSCRIBE sip:u+431234567 at foobar.at:5160 SIP/2.0 Via: SIP/2.0/UDP 192.168.2.82:39982;branch=z9hG4bK-d8754z-3116e1207913aa4e-1---d8754z-;rport Max-Forwards: 70 Contact: <sip:u+431234567 at 11.111.11.11:39982> To:

Hi all, For those of you people that use Agents (with Agentlogin, not AgentCallbackLogin) on a call center, I have this need: when the agent logs in, a channel keeps running all the time that the agent is logged in to receive the incoming calls. How do I know which agent logged in (code)? Right now, if I query the login channel, there is no information about which agent is logged on: #

The Wine maintenance release 4.0.3 is now available. What's new in this release (see below for details): - Various bug fixes - Updates to the National Language Support files The source is available from the following locations: https://dl.winehq.org/wine/source/4.0/wine-4.0.3.tar.xz http://mirrors.ibiblio.org/wine/source/4.0/wine-4.0.3.tar.xz Binary packages for various

The Wine development release 4.14 is now available. What's new in this release (see below for details): - New version of the Mono engine with upstream updates. - PE dlls no longer rely on the MinGW runtime. - Exception handling fixes on ARM64. - Various bug fixes. The source is available from the following locations: https://dl.winehq.org/wine/source/4.x/wine-4.14.tar.xz

(Sorry, my previous post was sent in HTML format) I am having a hell of a time with shorewall... I have a Dlink DCM202 Cable modem with the Ethernet connected directly to eth0 on the linux box. Then I have a second nic on the linux box connected to a hub for the internal network. I am trying to allow traffic from the internet connect to my FTP and WEB servers on my Winbloze box on the lan.