similar to: Problem after joining Windows domain: Will Samba support "fallback" to local domain for authentication of local users?

Just thought I'd pass along an error I received this weekend after upgrading two servers to 5.6. Both are HP Proliant DL380 servers running 64-bit, but one is a G6 model and one is a G7. After the upgrade and the reboot to the 2.6.18-238.9.1.el5 kernel, both servers displayed the following error at boot: "pci_mmcfg_init marking 256MB space uncacheable." Some Googling

OK, it's working now. I waited until the production lines were undergoing a shift change and brought down all of Samba, then restarted it. Printing now works just fine. I still don't know what caused the problem, I never saw any error messages in the [sn]mbd or client logs, even with the log level turned turned up to 2. Thanks very much for the time and trouble you took to think about

I've had the chance to give 2.2.7a a try, with no change in behavior. LabView still takes several minutes to load, and disk utilization shoots way up. Just to see what would happen, I tried Samba 2.2.5 and got the same results. I then dropped back to 2.2.4, and everything works fine. LabView loads in about 12 seconds, disk utilization stays low during the load, no locking errors appear in

Hello Everyone, I recently installed CentOS 5.5 x86_64 on a brand new ProLiant DL380 G7. I have identical OS software running reock-solid on two other DL380 ProLiant servers, but they are G6 models, not G7. On the G7, the installation went perfectly and the machine ran great for about 2 weeks, when it just seemed to "stop". The system stopped responding on the network, and there was

Am 22.07.2015 um 17:41 schrieb Windsor Dave (AdP/TEF7) <Dave.Windsor at us.bosch.com>: > Sorry for the top post, Outlook defaults strike again..... Outlook forces you to write above ? :-) -- LF

Windsor Dave (AdP/TEF7) wrote: >> Behalf Of Leon Fauster >>Am 22.07.2015 um 17:41 schrieb Windsor Dave (AdP/TEF7) >> <Dave.Windsor at us.bosch.com>: >>> Sorry for the top post, Outlook defaults strike again..... >> >>Outlook forces you to write above ? :-) > > Perhaps I should say instead that it "strongly encourages" top posting, >

I hate to follow up on my own post, but here's an additional bit of info: I've tried changing the "print command" setting in smb.conf to log the command and parameters when a job is printed. However, no output is ever logged; it's acting as if the print job is being spooled but the print command isn't being executed. The print command I added is: print command = echo

I have encountered a strange printing problem with Samba 2.2.4 running under HP-UX 11i. In the process of investigating a printing problem, I have found that Samba has stopped passing jobs along to the UNIX lp spooler as of yesterday afternoon. When NT/W2K clients print to printers on my server, the jobs are accepted, Samba spool files are created in the spool directory defined for the printer

>-----Original Message----- >From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On Behalf Of Leon Fauster >Sent: Wednesday, July 22, 2015 6:20 PM >To: CentOS mailing list >Subject: Re: [CentOS] rsyslog.conf > >Am 22.07.2015 um 17:41 schrieb Windsor Dave (AdP/TEF7) <Dave.Windsor at us.bosch.com>: >> Sorry for the top post, Outlook defaults

Does anyone have any idea what can cause nmbd to begin gobbling CPU? We are running Samba 2.2.4 on HP-UX 10.20, having upgraded from Samba 2.0.10 about a month ago. Our clients are a mixture of NT 4.0 and Win2K. Today, we have begun to see widespread client drive disconnections, and nmbd is averaging 60%+ CPU usage with peaks up to 100%. We have heard reports of network problems at our site

On Thu, July 23, 2015 8:43 am, Windsor Dave (AdP/TEF7) wrote: >>-----Original Message----- >>From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On >> Behalf Of Leon Fauster >>Sent: Wednesday, July 22, 2015 6:20 PM >>To: CentOS mailing list >>Subject: Re: [CentOS] rsyslog.conf >> >>Am 22.07.2015 um 17:41 schrieb Windsor Dave

Hello All, I recently upgraded one of my HP-UX servers from Samba 2.2.4 to 2.2.7. Since that time, I have noticed that disk activity on the file system where the Samba var directory is kept seems to be higher than I would expect. We have now begun to experience a problem with PC clients running National Instruments' LabView software, installed on a Samba share. When any PC client tries to

I will be out of the office: From: Monday, Dec. 23rd Through: Friday, Jan. 3rd I will return to the office on Monday, Jan. 6th I will only be checking email or voicemail. Once or twice during that time period. Members of the I.T. dept. will be able to contact me if there is a critical issue. Enjoy the time off over the holidays and Happy New Year! >>> samba 12/21/02 12:00

Looking at the same manpage, it seems that these selectors are not really being removed, just renamed. The old names are being deprecated. Instead of Use ========== === warn warning err error panic emerg Best regards Dave Windsor AdP/TEF7 -----Original Message----- From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On Behalf Of m.roth at 5-cent.us Sent:

Sorry for the top post, Outlook defaults strike again..... Best regards Dave Windsor AdP/TEF7

On 07/23/2015 09:34 AM, Valeri Galtsev wrote: > > On Thu, July 23, 2015 8:43 am, Windsor Dave (AdP/TEF7) wrote: >>> -----Original Message----- <snip> >>>> Sorry for the top post, Outlook defaults strike again..... >>> >>> Outlook forces you to write above ? :-) <snip> >> >> Perhaps I should say instead that it "strongly

I was looking at the manpage for rsyslog.conf, primarily because I need to filter my manager's new fedora 22 logs coming to our loghost, because of the bug that I forwarded (if it gets through). At any rate, I am surprised: under selectors, I see that " The keywords error, warn and panic are deprecated and should not be used anymore." Huh? If I only want warn or more severe,

Hi Bernd, For now, we have backed down to 2.2.4. This seems to have solved our problems. This is frustrating, though, since we wanted to upgrade to at least 2.2.5+patches to possibly improve our situation with downloadable printer drivers. In my last post to the Samba mailing list, I mentioned that downgrading to 2.2.4 fixed my problems and asked for suggestions, but yours has been the only

Hi I have just upgraded a mail server from dovecot-0.99 to stable (dovecot-1.0.59). My normal desktop email client, kmail is working fine, but outlook keeps producing PLAIN authentication errors, and refusing to authenticate. From dovecot.log, I can see dovecot: Mar 13 10:57:30 Error: auth(default): sql(<xxxxxxxMy Detailsxxxxxxxxxxx>): Password query must return a field named

Hi I am replacing my current mail system, using Exim/Postgres/WU-IMAP to another host using Dovecot. Everything has gone well, until I have tried to access some test mails via POP. The error message I am getting is Feb 14 03:03:57 wpc1273 pop3(simonw at orion-w-t.co.uk): lstat (/home/dovecot/users/orion-w-t.co.uk/simonw/cur) failed: Permission denied Feb 14 03:03:57 wpc1273 pop3(simonw at