similar to: printing from dos works...not from smbclient

Hello everyone, I came back from a long vacation the other day to a RH 7.3 system that would not boot. My situation is similar to Eddy's post "Seriously corrupt ext3 root filesystem - help?" from a couple of days ago. I can mount the drive in read-write and read-only modes. I can get into some of the directories and get certain files off of the disk. But, if I try to access a

I've got Samba 2.0.3 running on my Linux box. Marvin is the samba server. Bugs is the NT box. Attached is the relevant part of my smb.conf file. I removed several parts from what's attached to save bandwidth. What you see is simply the part that pertains to my printer. I can't print to the DeskJet printer. The printer appears in my network neighborhood, but I just can't get

Hello everyone, I posted yesterday about setting a global variable. I''ve done everything I can think of to keep the global variable set outside of the onComplete. Is this impossible? Surely I''m not the only one who needs this. Thanks for any help, Kevin -- Kevin Old kevinold-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

Having problems with the autocomplete on my linux box and firefox. When I use form tags it breaks, without form tags everything works fine. Exact copy of the example provided, but I added form tags.. The initial search and select works but then the box sort of "locks up" and I can''t change it at all, If I do try to type something nothing changes but a second later the whole

Hi Sunmanagers I still have a problem with my samba printing mechanism. When I log on some windows machines it will not print. I have found out that when I print from some machines while the print queu is stopped then the jobs are saved there as root. When I print from other machines they are saved as my name. I can print from dos by using echo something > \\server\printer. I can print with

I've having problems with a BT 2 span ISDN-30/Digium TE205P asterisk setup with outgoing calls not completing and requiring an Asterisk reset to 'unstick' span 1. Sorry this is a bit long but I'm completely out of my depth :-( This system has been in use for some while and I recently upgraded it to asterisk 1.4.24, zaptel 1.4.11 and libpri 1.4.9. I didn't change

> > I use postfx 2.3.5 + dovecot (pop3/imap/lda/auth daemon for postfix) rc15. > > root at post /etc/postfix# grep dovecot main.cf > smtpd_sasl_type = dovecot > virtual_transport = dovecot > dovecot_destination_recipient_limit = 1 > > root at post /etc/dovecot# grep password_query dovecot-sql.conf > password_query = SELECT mail as user, cryptp as password, >

Hi All, I've a BT Versatility PBX that I want to connect to my asterisk 11.9.0 box via BRI port in NT mode but actually I wasn't able to get it working. I've another standalone PBX, it's a Panasonic model, which works fine connected to the same port. The BT connected to a UK BT BRI line works quite fine after roughly a minute once connected. The PBX can be seen at

I have a working system with asterisk 1.4.26.2 libpri 1.4.1 and zaptel 1.4.12.1 With a digium TE205p. I am trying to update to libpri 1.4.10.2. When I do, incoming calls work but outgoing does not. When I do this I "rm /usr/lib/libpri*" then just install libpri-1.4.10.2 as normal. I then do a make clean in asterisk and make distclean ,then configure, make and make install. I do

Hello- I have a system with one D410P and one B200P (both OpenVox). All is well with the D410P, inbound and outbound, and I can initiate calls on the B200P BRI span, but there may be something wrong with my inbound BRI setup: there is no indication of an inbound call when I dial in to it from the PSTN. When I run "pri intense debug" and make a call to the BRI span, I can see a

I have an application where I need to send outbound prerecorded messages. The Asterisk "call file" process works fine if I am sending the call via SIP or IAX, but not via ZAP over a PRI channel. The destination device (my cell phone) never rings. The only unusual thing I see is on the fifth line of the "full" log, below, "channel.c: Don't know what to do with

I have an asterisk with a TE110P configured as T1 which is behind a PSTN gateway. This gateway has an E1 to PSTN and a T1 to asterisk. This T1 is configured as Network and * as CPE. Every call I receive in E1 gateway is directly switched to asterisk using T1. Remember E1 is alaw. Both E1 and T1 have Natural Microsystems boards with a very simple software. When I call to E1 asterisk signalling

Hi List, I have configured TE121PF card in E1 mode. I am using asterisk 1.6 and freepbx 2.7. My card staus turn in to green and looks like sync with the service provider. My service provider is BSNL - India. I have one toll free number for incoming and one land line number for out going calls. Problem : If i am calling to the toll free number, i am getting the ring but that call is

I've been working on an asterisk box at work for a few weeks now, things were finally starting to sail smoothly until I hit this head scratcher this morning. It's a rather intricate problem, so bear with me. Heres the scenario. What works: If I call from my sip phone -> sip phone everythings ok If I call from sip phone -> external pots number ok as well If I map one of our

Hi, I'm having problems with a new ISDN PRI in a new server. The cable is connected and the E1 modem seems to have issues with syncing (blinking light on the modem). versions: CentOS 6, asterisk 1.6.2.20, dahdi 2.5.0.1, libpri 1.4.12 ------------------------------------------------------------------------------------ dahdi show status T4XXP (PCI) Card 0 Span 1 RED 0

I managed to get Asterisk working with my PBX using T1, now I am moving on to trying to make PRI work. I have my zaptel.conf and zapata.conf configured as follows: Zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone=us defaultzone=us Zapata.conf: [channels] transfer=yes immediate=yes callprogress=yes language=en context=default switchtype=national signalling=pri_net group=1

Hi all, Can somebody help me out, to get the call going through to my provider? I connected my A104D Sangoma card to E1/isdn and each I tried to make call I get the errors below. My protocol analyzer can see only setup info and release complete. WIRELESS2*CLI> set debug 9 Core debug was 0 and is now 9 WIRELESS2*CLI> pri intense debug span 1 Enabled EXTENSIVE debugging on span 1 T203

hello, I have a Junghanns QuadBRI card in my asterisk server. I'm able to dial & connect to local numbers through the ZAP interfaces however when I try to dial national numbers with the according area code the connection fails, an intense BRI debug is shown below. The error being Ext: 1 Cause: Unallocated (unassigned) number (1), class = Normal Event (0) about half way through the

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1"> <title></title> </head> <body text="#000000" bgcolor="#ffffff"> Hi,<br> <br> have any one sucessfully connected E100P to Cisco? I am

Hi list! We currently have a PRI gateway composed by a box with two Digium quad-span PRI cards (a TE420 and a ). One of the cards is filled with TELCO1, while the other has first two slots filled with TELCO2, and 3rd slot with TELCO3. I am currently having (timer ?) issues on TELCO3 (span 7) D-Chan (202 as determined by dahdi_genconf ) is constantly failing causing on-going calls to terminate.