similar to: Can't mount share DFS fron AD on a Linux Box.

Hi everyone; I have a problem on my 10 nodes cluster with ocfs2 1.2.9 and the OS is RHEL 4.7 AS. 9 nodes can start o2cb service and mount san disks on startup however one node can not do that. My cluster configuration is : node: ip_port = 7777 ip_address = 192.168.5.1 number = 0 name = fa01 cluster = ocfs2 node: ip_port =

I have a setup with lot's of small files (Maildir), in 4 different volumes and for some reason the volumes are full when they reach 60% usage (as reported by df ). This was ofcourse a bit of a supprise for me .. lots of failed writes, bounced messages and very angry customers. Has anybody on this list seen this before (not the angry customers ;-) ? Regards, =paulv # echo "ls

I looked around, found older post which seems not applicable anymore. I have a cluster of 2 nodes right now, which has 3 OCFS2 file systems. All the file systems were formatted with 4 node slots. I added the two news nodes (by hand, by ocfs2console and o2cb_ctl), so my /etc/ofcfs/cluster.conf looks right: node: ip_port = 7777 ip_address = 192.168.201.1 number = 0

hi there i try to setup OCFS2 with loop device /dev/loop0 i've 4 servers running SLES10 SP2. internal ip's: 192.168.55.1, .2, .3 and .6 my cluster.conf: -------------------------------------------- node: ip_port = 7777 ip_address = 192.168.55.1 number = 0 name = www cluster = cawww node: ip_port = 7777 ip_address = 192.168.55.2

One thing that is bothering me about my controller specs is that sometimes I end up with a number of examples that are the same except for the example name. The reason that this happens is that I''ve expressed all the expected behavior with should_receive. While this does more or less work as intended it doesn''t feel right. As an example, let''s say I''m writing

I notice when issuing the command "net rpc user testuser -S ip_address -U administrator%password" that the testuser gets added to the remote machine (Win 2k3) sucessfully, however the account is disabled. After adding the user remotely it requires that the administrator log into the remote machine "ip_address" to enable the newly created account. Is there a way to add a user

R-sig-Debian help, I have installed an ODBC Driver for Linux. I want to connect to our database through R via: >library(RODBC) >con <- odbcDriverConnect("SERVER=IP_address:PORT;DRIVER=ORACLE;DATABASE=MAGNUS") Warning message: In odbcDriverConnect("SERVER=IP_address:PORT;DRIVER=ORACLE;DATABASE=MAGNUS") : ODBC connection failed I don't really know whether this

On 12/16/2013 08:53 AM, Joaquim Barrera wrote: [please don't top-post on technical lists] > Excuse me for the duplicate anwer but I observed exactly what I was > telling you. I execute "sudo ./run tools/virsh" and then: If you are running virsh as sudo, then you must remember that virsh is running under root, not you. > > 'connect

An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20110303/0fbefee6/attachment.html

Is there a way to have extensions automatically created for registered sip users ? I did some investigation and found some hope in chan_sip with relation to the somewhat undocumented usereqphone option but i may be totally off track. All i want to be able to do is send a call to number@ip_address where the number is the username configured on the phone that has registered with asterisk

Hi, I want to share a partition of an external disk between 3 machines. It is located on a Sun StoreTek 3510 and bound (via multipathing) to all 3 machines. One machine (say mach1) is the node I used to create the filesystem and setup /etc/ocfs2/cluster.conf. I copied the file to the other 2 machines. All use the same /etc/multipath.conf[1], too. All start /etc/init.d/ocfs2 at boot, all are

I people, i install the ocfs in my virtual machine, with centos 5.3 and xen. But when i turn off the machine1, the ocfs start the fencing off the machine2. I read the doc in oracle.com, but could not solve the problem. Someone help? My conf and my package version. cluster.conf node: ip_port = 7777 ip_address = 192.168.1.35 number = 0 name = x1 cluster

Hi, I´d like to create two classes for HTB, one of them to limit traffic for everything except browsing and the other to limit traffic only for browsing. How can I mark all traffic except the one related to browsing with iptables? Currently I mark all traffic related to one IP with: iptables -A PREROUTING -i eth2 -t mangle -p tcp -s $IP_ADDRESS -j MARK --set-mark 10 Should I use three rules

Hello. What we have: 2x Debian 5.0 x64 - 2.6.32-20~bpo50+1 from backports DRBD + OCFS2 1.4.1-1 I have both node reboot every day on my tests. On heavy load it have to 1-3 hour to reboot, on idle about 20 hours. I not sure what it is a OCFS2 related but if I not mount OCFS2 partition - I don`t get this reboot. In attach screenshoot with system console on what error. Nothing special in logs.

We're trying to setup 3 PRDM partitions (VMware) across 2 nodes. As long as only one is configured in cluster.conf, there's not problem. As soon as we try to use 2 or more we get issues. It looks the same as bug 636: http://oss.oracle.com/bugzilla/show_bug.cgi?id=636 I posted my cluster.conf and command line results there. I'm including them here in the hopes that someone on this

Hi, I was interested in a simple configuration with 2 machines sharing a drbd drive in primary-primary mode. I am done with drbdb, but I am a newbie to ocfs, so wanted some help. I have 2 machines, with centos5.2 , kernel 2.6.18-8.el5. I downloaded the following packages : ocfs2-2.6.18-92.el5-1.4.1-1.el5.x86_64.rpm ocfs2-tools-1.4.1-1.el5.x86_64.rpm ocfs2console-1.4.1-1.el5.x86_64.rpm (download

Ubuntu 14.04, drbd Hi On a drbd Primary node, when attempting to mount our cluster partition: sudo mount -t ocfs2 /dev/drbd1 /cluster we get: mount.ocfs2: Unable to access cluster service while trying to join the group We then call: sudo dpkg-reconfigure ocfs2-tools Setting cluster stack "o2cb": OK Starting O2CB cluster ocfs2: OK And all is well: Aug 22 13:48:23 uc1 kernel: [

If the vlan kernel argument is provided, then it is used during networking auto-configuration. Signed-off-by: Darryl L. Pierce <dpierce at redhat.com> --- scripts/ovirt-config-networking | 56 ++++++++++++++++++++++++++++++++------ scripts/ovirt-early | 7 ++++- 2 files changed, 53 insertions(+), 10 deletions(-) diff --git a/scripts/ovirt-config-networking

All, We are having some problems getting OCFS2 to run, we are using kernel 2.6.15 with OCFS2 1.2.1. Compiling the OCFS2 sources went fine and all modules load perfectly. However, we can only mount the OCFS2 volume on one machine at a time, when we try to mount the volume on the 2 other machines we get an error stating that another node is heartbeating in our slot. When we mount the volume

Hi , I am getting the error "No space left on device" on a device with free space which is ocfs2 filesystem. Additional information is as below, [root at sai93 staging]# debugfs.ocfs2 -n -R "stats" /dev/sdb1 | grep -i "Cluster Size" Block Size Bits: 12 Cluster Size Bits: 15 [root at sai93 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release