similar to: intermittent login problems (netbios related perhaps ??)

Hi all I've a samba server listen on eth0 (everything ok) and eth2 server1 has eth2: 192.168.100.212 <--> 192.168.100.213 (another linux server) with another interface 192.168.30.0/24 from network 192.168.30.0/24 I can ping 192.168.100.212 and works with samba shares (but only using numeric IP) I don't see any computers from windows machines. nbtstat doesn't find any host

On Wed, 3 Aug 2016 18:41:53 +0200 "Pol Hallen" <samb at fuckaround.org> wrote: > Hi all > > I've a samba server listen on eth0 (everything ok) and eth2 > > server1 has eth2: 192.168.100.212 <--> 192.168.100.213 (another linux > server) with another interface 192.168.30.0/24 > > from network 192.168.30.0/24 I can ping 192.168.100.212 and works

I think the panic is the consequence of drive write failure. So the actual problem is before the panic call trace. I'd post the entire dmesg somewhere wrap safe (either you mail agent or the forum is hard wrapping and is a pain to read). What do you get for smartctl -x <dev> In the meantime check or replace cables, usually it's the connectors that are faulty not the cable itself.

On Tue, Feb 17, 2015 at 7:54 AM, Jason Pyeron <jpyeron at pdinc.us> wrote: >> I'd post the entire dmesg somewhere > > http://client.pdinc.us/panic-341e97c30b5a4cb774942bae32d3f163.log At least part of the problem happens before this log starts. >> What do you get for >> smartctl -x <dev> > >

On Tue, Feb 17, 2015 at 7:34 PM, Jason Pyeron <jpyeron at pdinc.us> wrote: >> -----Original Message----- >> From: Chris Murphy >> Sent: Tuesday, February 17, 2015 20:48 >> >> On Tue, Feb 17, 2015 at 7:54 AM, Jason Pyeron wrote: >> >> I'd post the entire dmesg somewhere >> > >> >

Hi all, All Win98 & Win2k used to be able to connect, but as of last week only one Win2k is able to access the share folder, but not without a little issue. Another Win2k in the same subnet have intermittent connection issue and Win98 is not able to access the folder. Setup: Samba 2.2.2 install into Solaris8 in a subnet with two other Win2k server. This subnet is connect to a number of

> -----Original Message----- > From: Chris Murphy > Sent: Tuesday, February 17, 2015 3:58 > > I think the panic is the consequence of drive write failure. > So the actual > problem is before the panic call trace. Most of the time it panics without any warning, but once there was: > > -----Original Message----- > > From: Jason Pyeron > > Sent: Sunday,

> -----Original Message----- > From: Chris Murphy > Sent: Tuesday, February 17, 2015 23:38 > > On Tue, Feb 17, 2015 at 7:34 PM, Jason Pyeron wrote: > >> -----Original Message----- > >> From: Chris Murphy > >> Sent: Tuesday, February 17, 2015 20:48 > >> > >> On Tue, Feb 17, 2015 at 7:54 AM, Jason Pyeron wrote: > >> >>

hi all I have a samba server acting as a domain member server providing file/print services to our SME As i want to provide users with a list of available printers for installation, i need to give them a win32 shortcut to "\\samba-server\" so they can see the available printers and install as required BUT... doing so will also show them all of the available shares... not a major

> -----Original Message----- > From: Jason Pyeron > Sent: Saturday, February 07, 2015 22:54 > > NOTE: this is happening on Centos 6 x86_64, > 2.6.32-504.3.3.el6.x86_64 not Centos 5 > > Dell PowerEdge 2970, Seagate SATA drive, non-raid. > > I have this server which has been dying randomly, with no logs. Here is a console picture. http://i.imgur.com/ZYHlB82.jpg

Hello list, The issue is as the topic says, following are details: the Samba server running as ADS member, NBT enabled on Windows machines, no WINS. Windows machines can find each other by 'nbtstat -a' but cannot find the Samba server. The Samba server can't find neither Windows machines nor itself by 'nmblookup -a <netbios-name>', error message is "could not open

Running v3.0.2a-SUSE, joined to AD, all clients are XP.SP2 When smb.conf has "smb ports = 139", then %L is populated with the appropriate netbios alias name as selected by the end user, and everything works as expected. When "smb ports = 445" or is not specified, then %L is populated with the host name instead of the alias name. Is there a code patch for %L or an

Hello I'm having a hard time finding information about NetBIOS. Maybe someone here has good experience with this API, so I figured I could try asking here, although the question is specifically on how to use NetBIOS in an all-Windows LAN from Visual Basic :-/ I'm trying to register a new name on a server so that clients can locate it by broadcasting its NetBIOS name. At this point,

> -----Original Message----- > From: Chris Murphy > Sent: Tuesday, February 17, 2015 20:48 > > On Tue, Feb 17, 2015 at 7:54 AM, Jason Pyeron wrote: > >> I'd post the entire dmesg somewhere > > > > http://client.pdinc.us/panic-341e97c30b5a4cb774942bae32d3f163.log > > At least part of the problem happens before this log starts. Feb 15 23:41:19

I have just entered the wonderful world of windows filesharing at my small home LAN and I'm experiencing the following problem: When I continually listen to ogg files in Windows 2000 Server from a samba server the music locks up every 15 minutes or so. Everything in the windows gui suffers from terrible preformance until i get to disconnect the share from the samba server, then everything

On Mon, Dec 1, 2014 at 11:18 AM, Rowland Penny <rowlandpenny at googlemail.com> wrote: > > Yes it is used in production :-) > > Samba has changed a little bit since 2001 :-D > Yes, I know it has. My point was that I've been working with Samba for quite some time, so this is not all new to me. I've also been contributing to the SME Server project on this front for

Hello list. My server: Gentoo 2.6.21-xen dom0 xen-tools 3.2.1 lvm 2.02.28-r2 udev-115-r1 Symptoms: normally I run 4 domUs. About once a week I have a need to restart a domU. Sometimes it works just fine, but other times it does not and I''ll get a message back saying "Error: Device 0 (vif) could not be connected. Hotplug scripts not working". The domU config file has not

Hello, Is there *any* way to reliablily determine the NetBIOS name of a computer when you only know their IP address? I know it is very easy to find the IP address from the NetBIOS name, but I can't seem to find any way of getting a NetBIOS name from an IP.. James deBoer (jdeboer@scsinternet.com)

After failing to install on two different machines that were running Windows, I realized that one machine had a bad hard-drive, and the other bad memory. So I've collected the good parts into one machine and installed CentOS with SME. This was the fastest install of Linux I have every seen, 15 minutes done, configured, and running, web and email server. It is a very secure config, no GUI

Dear R-List member, I have a problem when I'm trying to save two arrays from a foreach-loop. I'm also not sure whether this is possible or just my inexperience. However, this works perferctly fine with a for-loop. Here is an example code - any help is much appreciated!!: ############ n.vpn = 2 n.run= 3 # create to empty matrices sme = matrix(NA,4,n.vpn) test = matrix(NA,4,n.vpn) #