similar to: Architecture VPN and Samba with ADS 2003 help needed

Dear all Lartc, I try to split my Internet access to my 2 ISP with 1 linux (GNU/Debian sarge) 3 NIC router, I want all my users conneted with ISP1 and just some IP connected with ISP2 Here is my configuration: Internal network: 10.117.71.0/24 Interface eth0 ISP1: IP for my linux box: 1.2.3.4/29 Interface: eth1 Gateway: 1.2.3.5 ISP2: IP for my

Dear All, I search for the packages of samba for GNU/Debian sarge with acl compiled inside. In fact I did try the 2 links provided by the web site but it still doesn't work ACL and Samba 2.0.23c (samba.org and entreprisesamba.org). This is an upgrade from the 3.0.14a, with this version the ACL support was ok. No it doesn't work anymore (Samba only see the basic rigths). Regards,

We have 2 offices. One is in the US and the other in India. We are testing Asterisk as a possible solution. Does anyone have advice for the preferred architecture when dealing with the latency from the US to India? For example, although it is not a requirement to have an Asterisk server in India it may make sense to have one there and connect office to office vi IAX since I hear that it supports

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Gus & Tinc-VPN List: It looks like I need to run 2 instances of tincd on each server. 1 instance of tincd will responsible for running a VPN over the LAN on eth1. This means Class C addresses from 10.0.1.10 -> 10.0.1.250 Another instance of tincd will be responsible for running a VPN over the WAN on eth0. This means Class C addresses from

Hello, I am having a problem with my current SIP over VPN setup. We have a server running asterisk at our office. All the phones in the office are on the same network / local to this server. We also have two employees with home offices using SIP phones over VPN to connect to the asterisk server. These phones have no problem with calls to the phones in the office, however there is no audio

Release for CentOS Linux 7 (2003) on the x86_64 Architecture We are pleased to announce the general availability of CentOS Linux 7 (1908) for the x86_64 architecture. Effectively immediately, this is the current release for CentOS Linux 7 and is tagged as 1908, derived from Red Hat Enterprise Linux 7.8 Source Code. As always, read through the Release Notes at :

Our Primary internal Samba server sits at our HQ. It provides WINS services for all of our internal machines. We have a number of IPSEC VPN's that connect our remote offices to the HQ. Given that our Remote offices are relatively small we haven't found it necessary to equip them with machines running samba to provide local services. Instead all the requests for name

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Oops, I got it to work only after putting the WAN on port 656 so it did not interfere with port 655 for the LAN. I am going to depend heavily on this VPN daemon to do its work every day. On 12/11/2014 10:05 PM, md at rpzdesign.com wrote: > Gus & Tinc-VPN List: > > It looks like I need to run 2 instances of tincd on each server. >

Hi list: Has anyone done to set up two servers in different remote offices through VPN in order to get the VoIP communication? Thanks for your information. Tielin Xu

I have just finished compiling and installing Asterisk on a test Debian system. All is working well. We are now attempting to get remote offices to test the system I have installed both a SIP and an IAX client at a remote office. Then I connect to our office via Microsoft ISA firewall and the Windows XP VPN client. Neither of the softphones will connect. On the IAX softphone I just get a ringtone

Hey All, Sometimes we are running into issues with calls randomly being disconnected. We have a couple of phones is in a remote office. We have a PIX-to-PIX VPN setup between the offices. I know neither of these devices provide QOS but we usually don't run into any problems. I notice this problem when we are in a conference call with one of the employees at the remote office and a

Hi List, Our company has several small distributed offices we would like to inter-connect with bridged VPN a single subnet (last example in http://www.shorewall.net/OPENVPN.html). We have SIP phones in every office (up to 5) so we can use SIP without any NATing and securely. Max theoretical simultaneous calls possible ~30, but we have ~5-10 @ regular basis. OpenVPN server would be in the same

Hi All, I have running centos 6 server in my head quarters and branch offices. I need to access file server files in both location using VPN. How to setup vpn server in both location and how to access it. Could any one help me. -- *Thanks,* *Manikandan.C* *System Administrator*

First, I assume that you will be running NAT at both locations, if that is not the case, then the configuration will change. When you said VPN, are you using PPTP or IPSEC? Microsoft supports PPTP. In order to connect a PC over VPN to the office, which has a PPTP VPN Server, you will need to runs VPN software. After it is run, the PC obtains a new IP address from your office, If you are using

Hello to everybody, Sorry if my english isn?t very good. I need pass 802.1q through a VPN between two offices. I have mounted a WRT54GL, with OpenWRT firmware, conected to a switch trunk port in both offices. In the switch of the first office I have created five tagged VLANs and I need pass these VLAN to the second offices where it has created it too. Can I do this with Tinc in HUB/Switch

We''ve just released the fourth technology preview release of Samba 4. ============= About Samba 4 ============= Samba 4 is the ambitious next version of the Samba suite that is being developed in parallel to the stable 3.0 series. The main emphasis in this branch is support for the Active Directory logon protocols used by Windows 2000 and above. While we welcome your interest in Samba

I have a samba server running as an active domaincontroller. I want people in an other office building to use the same samba server. What is the best way to do this? Use a second domain controller. Vpn to first domain controller. (Using an Mikrotik router). And how can you configure windows to use the vpn at startup? Philip

The best and the easiest way. Just use OpenVpn. No need for a second DC if all remote pcs start the opnvpn client on startup. On the DC side run the OpenVpn -Server or use "Zero-Shell". Greetings Daniel EDV Daniel M?ller Leitung EDV Tropenklinik Paul-Lechler-Krankenhaus Paul-Lechler-Str. 24 72076 T?bingen Tel.: 07071/206-463, Fax: 07071/206-499 eMail: mueller at tropenklinik.de

I've got multiple satellite office all linked back to the main office via VPN. Each office has their own asterisk server which registers back to the main office's Asterisk server. Each office also has a 1Mb downstream / 384k - 768k upstream connection. The branches are using Speex for their connections back to the main office. The issue I'm having is that there are times that

I've a server running CentOS 5, Samba 3.0.23c and OpenVPN-2.1beta4 A laptop running Vista connects to the server over VPN. The CentOS server is local, domain and preferred master, and also WINS server. It looks like every once in a while the Vista laptop drops the VPN connection, which gets re-established soon after that. But the problem is, it appears that after the dropout the Vista