similar to: Hung XFS filesystems on Samba server

Hello All. I've just started looking into Xen and have a test environment in place. I'm seeing an annoying problem that I thought worthy of a post. Config: I have 2 x HP DL585 servers each with 4 Dual core Opterons (non-vmx) and 16GB RAM configured as Xen servers. These run CentOS 5.1 with the latest updates applied. These system both attach to an iSCSI target which is an HP DL385

Hi all! I've been experimenting with Xen on CentOS 5 and RHAS 5 for a while now with mixed success I thought I'd describe my latest challenge. I'll describe this from memory since all the equipment is at work and not contactable from here. I think I've described this config to the list before but here it is again: I have 2 x HP DL585 servers each with 4 Dual core Opterons

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-4 Severity: important *** Please type your report below this line *** Hello Debian Team, I have some strange behavior with a DL585 G7 with only two cpu sockets used (Opteron 6238 Interlagos). I use Debian 6.0 with a XEN Kernel. Every time when I start a DomU, the server makes a hard reset without any kernel panic or output. When I start the

-----Original Message-----From: John R Pierce <pierce at hogranch.com> Reply-to: CentOS mailing list <centos at centos.org> To: centos at centos.org Subject: Re: [CentOS] SCSI drives and Centos 7 Date: Sat, 29 Apr 2017 13:31:11 -0700 On 4/29/2017 12:42 PM, Gregory P. Ennis wrote: > what does `lspci` have to say about this raid card ? > > John, > > Thanks for the prompt

Processing commands for control at bugs.debian.org: > reassign 675266 src:xen 4.0.1-4 Bug #675266 [xen-hypervisor-4.0-amd64] xen-hypervisor-4.0-amd64: Hard reset when starting a DomU on HP DL585 G7 // Opteron 6238 Bug reassigned from package 'xen-hypervisor-4.0-amd64' to 'src:xen'. No longer marked as found in versions xen/4.0.1-4. Ignoring request to alter fixed versions of

Hi folks, I've just spent about six hours messing around with an HP DL585 G2 server trying to get CentOS to go. This box is a dual-CPU with dual cores and 10GB of RAM total. According to the datasheet, the POST screens, and the BIOS, it has the Broadcom embedded NICs in it. The problem boils down to the installed OS (4.4 x86_64) not seeing the NICs. If you do an lspci on the system

Hi Well we are now using HP instead of Dell and have hit a major hurdle. We dont seem to be able to kix any of these boxes. I have been most recently trying on a dl585 and the issue appears to be that the kix kernel does not detect any nic. Its strange as the box can be installed using iso's and the nic appears as eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz

-----Original Message-----From: John R Pierce <pierce at hogranch.com> Reply-to: CentOS mailing list <centos at centos.org> To: centos at centos.org Subject: Re: [CentOS] SCSI drives and Centos 7 Date: Sat, 29 Apr 2017 11:19:38 -0700 On 4/29/2017 10:49 AM, Gregory P. Ennis wrote: > I am remote from the unit today, and do not have a good way to look at > the board today, but the

On 4/29/2017 12:42 PM, Gregory P. Ennis wrote: > what does `lspci` have to say about this raid card ? > > John, > > Thanks for the prompt : > > lspci demonstrates : > > 02:01.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) > 02:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) > 02:02.1 SCSI storage controller: Adaptec AIC-7902B U320

On Sun, Apr 30, 2017 at 1:03 PM, Gregory P. Ennis <PoMec at pomec.net> wrote: > Thanks for your help. I did not want to replace this machine with new > equipment, but it looks like I may need to do just that. > > Here are the results with respect to the lsi raid board for : > > lspci -nn > > > 02:01.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID

I've just setup nic bonding on our server (DL585-G7 running Centos 5.5 x86_64) as detailed on the wiki: http://wiki.centos.org/TipsAndTricks/BondingInterfaces and all seems fine but from other "howto's" I've seen on the web, they're should be a /proc/net/bond0/info As far as I can see, I don't have one and I'm not sure if it should be there or its absence is a

With the Dell OpenManage question on my mind (and having seen it answered very well), I was reminded of an interesting and a little surprising thing I saw yesterday. I upgraded a PowerEdge 2850 from CentOS4 to Fedora Core 5 (keeping everything updated for GNUradio to run on CentOS 4 became more of a job that it should have) for our pulsar data processing machine (it has a GNUradio Universal

Using the latest version of syslinux/pxelinux.. When cold pxe booting a HP DL585 G2 (Broadcom NIC), if the pxemenu item is LOCALBOOT 0 and is selected, then a red screen with the following error occurs: Illegal OpCode EAX=000E09AC EBX=00000000 ECX=00000000 EDX=00000000 EBP=00004408 ESI=0000F000 EDI=000045E9 DS=F000 ES=0000 FS=0000 GS=0003 CS:EIP=1000:00000240

I've run into an odd (at least to me) performance issue between a samba server and windows 2003. The windows side is w2k3 w/ SP2 on an HP DL585 with HP EVA SAN storage. Linux is CentOS 5 on a Sun X4200 with samba package samba-3.0.25b-1.el5_1.4and a FUSE mounted filesystem (glusterFS). Watching the network tab of task manager while pulling a few large files from the samba server to the

I get seg. fault with my * box. at the crash time i had about 35 Bridged Channel. i have: - dual xeon box (3.2Ghz) - 2Gb of memory - E7501 chipset motherboard. - U320 scsi disks - intel Gb ethernet device. - i only use sip for clients (no fxs in box) - TE405P for fxo (with 4 atran TA750). - ulaw is used as codec and echo cancellationo is enabled. but the core dump file has nothing to show with

Hi All, We have installed CentOS 5.3 x86_64 in an HP DL585 server with AMD Opteron 64 bit processor and 16 GB RAM. The kernel version is 2.6.18-128.el5 . Now this has thrown an error message in /var/log/message, Jul 3 21:41:11 db1 kernel: EDAC k8 MC0: general bus error: participating processor(local node origin), time-out(no timeout) memory transaction type(generic read), mem or i/o(mem

Hi people I am new to Xen and having some trouble getting it up and running. I am trying to install it on a Dell Poweredge SC420 that has CentOS (RHEL3 clone) installed. The error that I am getting when I first try to boot into the Xen kernel, after having installed the binary and adding the necessary lines to grub.conf is : ---snip--- md: Autodetecting RAID arrays md: autorun ... md: ...

Below is from make buildworld output on FreeBSD cvsup'd to RELENG_4 (so 4.8-STABLE) on the following hardware: Intel SHG2 Hodges Dual Xeon board 2 x Intel Xeon 2.4Ghz (512k) 2 x 512MB PC-2100 266Mhz ECC DDR Seagate 36GB 10K U320 LC SCSI Adaptec SCSI Raid 2000s 48MB SDRAM Intel Hudson 3 SC5200 base w 450W Any suggestions? Cheers, Carl. <snip> cc -o make_keys -O -pipe -I.

Hello, I have a Dell 1850 with dual Xeon procs and two u320 36Gb drives. I would like to set this up as dual boot system with 4.2 on disk 0 and 3.6 on disk 1. I imagine that I would install 4.2 first and then 3.6. Would I need to remove the other hard drive while installing a given version? Any gotchas? How about setting up GRUB? Anything special or does the install take care of it? Thanks,

Hi, I have a problem with isolinux failing to boot a kernel whenever I navigate and trigger the menu via serial console. My test machine is a DL585 G2, with iLO2. Navigating and booting the kernels off of the video console works 100% of the time. With the serial connection however, I _sometimes_ get a "menu.c32: not a COM32R image" error. Sometime it works fine. I suspect the serial