similar to: hp officejet 9130 and samba

we're using an hp officejet 9130 (all in one printer/scanner), wich has the possibility to store scans on a network share (smb). path, username and password are checked on a workstation and are ok. the printer has full access to the network. unfortunally samba denies access: <snip filename="log.smbd"> [2005/10/06 14:46:22, 0] smbd/negprot.c:reply_negprot(557) No protocol

Hi there, As the subject says, I'm trying to set up an HP OfficeJet 5610 on CentOS 4.4 for shared use across my machines. I've managed to get printing (through HPLIP/ CUPS/ SAMBA) and scanning (through SANE) shared; but I'm unable to get fax shared working. Is it possible to do that? The instructions on the HPLIP page talk about installing the 5610 as a fax device and then faxing

Has anyone gotten centos 4 to print on an officejet 7310? I have tried jetdirect with pcl and postcript no go... I have tried smb but it does seem to be browsable as its not listed and when I specify I enter the IP address for server and I dont know what the share is. Windows XP connects and prints fine. THanks, Jerry

I just picked one of these up to replace my 4315, which broke (I think the feeder roller gear broke from an overstuffed feeder), but it's giving me problems. I had no trouble configuring it to print, but it doesn't appear in lsusb and xsane can't find it, so I can't scan with it, which is the main reason I bought it in the first place. I've tried restarting the autofs service

I have a Sipura 2102 that I'm trying to do T.38 with a Clarent C5CM. I figured skipping the Asterisk server and going right to the Clarent would be best as T.38 is new in Asterisk. However, I can't get the Sipura to link up with the Clarent. Sipura support is less than responsive. Note: I set myself up as a Linksys Partner, and have spent hour(s) on the phone with them, but it

Hello all, I have a new disk and installed CentOS there but I am unable to print. I thought the printer was having troubles because from the /var/log/cups/error_log everything appears to be working. The printer is not printing however. I attached the printer to a windoze 98 box and I could print fine. I had printing on my previous system(FC3) but this isn't working. If I can't print

Why go through all this trouble when you can connect the printer to the network directly and be done with it? -- Sent from the Delta quadrant using Borg technology! Nux! www.nux.ro ----- Original Message ----- > From: "Chris Olson" <chris_e_olson at yahoo.com> > To: "CentOS Mailing List" <centos at centos.org> > Sent: Friday, 1 January, 2016 16:29:17

Hi Niki don't you need a hplip addon/plugin, which you can fetch from http://hplipopensource.com/hplip-web/install/install/index.html There, with the wizard, you get a file hplip-3.x.x.run which you download and run using bash hplip-3.x.x.run This will install the addon/plugin. suomi On 11/11/2016 08:49 AM, Nicolas Kovacs wrote: > Hi, > > I just installed a CentOS 7 + KDE desktop

Le 11/11/2016 ? 09:02, anax a ?crit : > Hi Niki > don't you need a hplip addon/plugin, which you can fetch from > http://hplipopensource.com/hplip-web/install/install/index.html > > There, with the wizard, you get a file hplip-3.x.x.run > which you download and run using > bash hplip-3.x.x.run > > This will install the addon/plugin. Thanks, I got it to work

I'm trying to share my HP 5610 on my Samba (3.0.24-1 fc6 x86_64) machine and am running into a typical HP related SANFU. The XP drivers supplied only install through the installation program. (ie. I can't use device manager to point XP to the driver and install it) So I installed the printer on my XP machine, used the installation program to install the drivers and then shared the

Hello, I have been trying to use the scan function of my HP Officejet 4215 by invoking sane. And that is not working. As an alternative, I hope I could run Wine as Windows XP and read in the HP cd that came with my printer to setup the printer and the scan function. Right now the printer works. It prints, copies, scans (using HP Director) and faxes and scan under Windows XP. Under

Hi, I just installed a CentOS 7 + KDE desktop in my office's network. So far, I'm quite happy with the results, though I have some trouble getting the printer to work. All the other machines in my office (server, desktops, workstation) are running Slackware64 14.1 or 14.2, and they can all use the printer perfectly. I installed hplip-gui and ran it. The printer is a network printer, it

Hello, I have RH 7.2 and was trying to make HP Officejet 7110 work with it. I have upgraded ghostscipt to 7.0.6 installed hpijs1.3.1 and foomatic-2.0. So in printconf-gui I was able to chose HP OfficeJet 7110 from the printers list and install hpijs driver. After sending page to print, printer is displaying message (printing) after printing page and diode On is blinking. Setting in printconf-gui

There has been a bit of grumbling recently about HP printer capability in one of our smallest prototyping Labs.? We have a single GigE switch connecting a Windows 7 machine and a Dell/CentOS-6 machine.? The CentOS machine also has connectivity via another network.? Currently, only the Windows 7 machine has been setup for printing on our HP OfficeJet 8615. Our Samba effort on the CentOS system has

[cross-posted from www.tek-tips.com] Dear samba forum, I've now wasted most of a weekend on this issue, so now it's time to swallow my pride and ask for help! Background: My main home computer died. I can't afford to replace it right now, so I'm attempting to retread an old AMD PC into a linux print/file server. Clients are a mixed bag of Windows XP home/professional PCs. The

Hello Centos fellows, I liked to run Centos on my IBM Power7 machine and therefore I used to download the images form: <http://isoredirect.centos.org/altarch/7/isos/ppc64/> http://isoredirect.centos.org/altarch/7/isos/ppc64/ But not it seems that this link is not working: The requested branch/release/arch/filename does not seem to be valid, please check your input Is Centos 7

On Nov 10, 2014, at 9:10 AM, ??????? ?????????? <v.linch at icloud.com> wrote: > My windows version is 2.6.5-3, latest on NUT site. > "upsc ups" shows many ups parameters such as ups.load, battery.charge etc. but there is no battery.voltage, which I need (ups - is the name of my device in config). > If I load driver usbhid-ups in debug mode (-DD), I see something like

An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20141111/7dd98eaa/attachment-0001.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: usbhid.zip Type: application/zip Size: 5991 bytes Desc: not available URL:

On Nov 10, 2014, at 6:44 PM, Valeri Linchevski <lincher at ya.ru> wrote: > Parameter, "blabla" :-) really is Ups.PowerSummary.Voltage, debug output is in attach. > Apparently some models are missing from the table that is consulted for "mge_type": https://github.com/networkupstools/nut/blob/master/drivers/mge-hid.c#L201 Arnaud or Emilien, Is there any way we

An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20141111/42cd1a34/attachment.html>