similar to: Domain Security and Mapping as More than One User

Hi, I am getting an I/O error while running fsstress on client samba mount point (only with smbfs) Can anyone, please look into this problem? Problem Description: x370 was configured for samba server & x206f as samba client. fsstress was running from two samba mount points from client i.e /SAMBA1 (type cifs) & /SAMBA2 (type smbfs). There was no load generating on /SAMBA2 & hence

for users defined on the PDC. However, I am setting up a second Samba server and want it to join the domain so I can use "security = domain". Lets call the PDC samba1 and the new samba client samba2. ON samba 1, I did: useradd -c 'Samba2 SAMBA' -d /dev/null -M -g 202 -s /bin/false -u 1503 samba2\$ passwd -l samba2\$ smbpasswd -a -m samba2\$ to create the trust account. Then

On Mon, 5 Mar 2018 10:39:53 +0000 Paul Littlefield via samba <samba at lists.samba.org> wrote: > I am planning to upgrade the DCs using the join and promote method. > > List of DCs > ----------- > 1) SAMBA1 > 2) SAMBA2 > 3) DC1 > 4) DC2 > > Currently SAMBA1 is the PDC and SAMBA2 is the "SDC" and are in sync No, SAMBA1 is a DC and SAMBA2 is another

Hello all, I have a few samba servers running winbind that are joined to the AD 2003 domain. Is it possible to designate one samba server to host the users' home directories instead of each one of them? If we have samba1, samba2, and samba3 and designate samba1 to host the home directories and when a user accesses samba 2 either via ssh or as a share, the home directory that the user sees

good morning all, i have an interesting issue with browsing. details: i have three subnets. (subnet1, subnet2, and subnet3) i have a samba server on each subnet. (samba1, samba2, and samba3) i have a windows 2000 server on subnet1. (m$1) samba1 is the domain master and wins server with ip 192.168.0.1 win2k clients authenticate to their local server and wins is set to 192.168.0.1. when i run a

I am planning to upgrade the DCs using the join and promote method. List of DCs ----------- 1) SAMBA1 2) SAMBA2 3) DC1 4) DC2 Currently SAMBA1 is the PDC and SAMBA2 is the "SDC" and are in sync with replication and rsync sysvol. DCs SAMBA1 and SAMBA2 are 4.1 git releases with AD Schema version 47. My plan to get to AD Schema version 69 was... 0. Add entries to the DHCP Server for the

Hi, currently I have the following Samba 3.0.2rc2 setup: [w2k 1] --- [Samba1] ----VPN Link---- [Samba2] --- [w2k 2] Samba1 and Samba2 are PDC's, there is one domain for each network. I'm trying to configure a symmetric trust relationship between them. Both Samba servers have "wins support = yes", and I added the other server/domain to their wins.dat (notably the line with the

Thanks to the four people who replied to my original posting (appended below, subject "Win95 problem"). I've made progress but have now hit a new problem. The solution to the original problem (How do you make a "standalone" client "log on to the network"?) was simply to tick the "Server Type/Log on to network" checkbox in the dialup properties.

Hi... I have 2 samba servers..... Samba1 and Samba2 All my win9x boxes will authenitcate and login to Samba1.... thus using Samba1's netlogon login.bat script.... In this script, is a command that maps a drive letter to a share on Samba2 I also have a command that maps a different drive letter to a share on Samba1 If the win9x box reboots and logs in.... all commands in the login.bat work...

>> From: "Mark Hazen" <mhazen@franklin.uga.edu> >> Subject: Re: Network Neighborhood comment fields and Samba >> >>Have you tried commenting that string out in your smb.conf file, and letting >>the string be set first in the individual configs? That'd be my first >>suggestion. I have tried that, and that just forced the default comment of:

I'm configuring a HA-cluster to share disks using heartbeat from http://www.linux-ha.org/ Two machines, lets call them server1 and server2 share the same disk with an ocfs2 file system. However, the two machines have separate disks for their OS installations. The two physical servers have two gigabit nics each and on those nics I place four virtual IP addresses which heartbeat makes sure is

Hello, after the update from Samba version 2.2.8a to samba-3.0.4 I have a big slowdown. The configuration at the moment is like this: samba1 --> Still running 2.2.8a on Solaris. Configured as a PDC. Workgroup A samba2 --> 3.0.4 on Solaris Workgroup A security = server; password server = samba1 samba3 --> 3.0.4 on Solaris Workgroup

Hello List, I have a special L2 VPN connected samba deployment setup and I want to make sure the name resolution arrangement is the best for the network. Setup : network 1 + Samba1<<SAME IP range>> <L2 VPN> network2 <<SAME IP range>> + Samba2 I have noticed that the wins server and wins support options are non-inclusive. Samba2: name resolve order =

Hello, now with "ldbsearch --cross-ncs ..." I dont find entries of domain controllers anymore except samba1 and samba2. sam.ldb seems to be clean now. But with the DNS-Tool from Windows I can see a lot of entries for samba3, all of them for services like _gc, _kerberos, _ldap, _kpasswd. Can this be the reason for the error I get when I join samba5 ? Do I have to delete this entries ?

On Tue, 19 Jun 2018 09:19:50 +0200 freebsd at tango.lu wrote: > On 2018-06-18 10:56, Rowland Penny via samba wrote: > > On Mon, 18 Jun 2018 09:58:07 +0200 > > FreeBSD User via samba <samba at lists.samba.org> wrote: > > > >> Hello List, > >> > >> I have a special L2 VPN connected samba deployment setup and I want > >> to make sure

We're finally trying to move off of Samba 2.x, and are having some very strange login issues. I've built two identical boxes, both running fully patched Ubuntu 9.10 x64, both have as packaged by Ubuntu 3.4.0 samba installs. Both are joined to the Active Directory server fine. net ads testjoin on both hosts reports "Join is OK" getent passwd on both hosts returns the full user

hi All, I just compiled 2.0.5a and I was using 1.9.17p4. After upgrade, the smbclient test failed. I tried to copy the same conf file but it still failed. Added interface ip=xxx.xxx.xxx.xxx bcast=xxx.xxx.xxx.255 nmask=255.255.252.0 session request to NEYMAN01 failed session request to *SMBSERVER failed # ./testparm Load smb config files from /opt/samba2/lib/smb.conf Processing section

Dear all For some reasons I would like to run two samba installations (/opt/samba1 and /opt/samba2) on the same host. Is such a dual installation supported? If yes, what do I have to consider? With many thanks Paul ******* <br> Notice: The information contained in this message is intended only for use of the individual(s) named above and may contain confidential, proprietary or

Hi All, Is anybody succeed to run a configuration on a two node clusters with Samba installed on each machine? I compiled two versions on different directories (/usr/local/samba1 and samba2). At this point, I can run 2 samba's on one node in case of failure but problems are on Active Directory authentication for the Fallback node. Any suggestion! I'm running AIX 5.2 with HACMP and

> Get rid of samba3 by demoting it again as you did last time, search > through sam.ldb for any mention of samba3 and samba4 (you will > probably have to use '--cross-ncs' with ldbsearch or lbdedit), then > remove them. > Now start again with a new DC, but this time, call it anything but > samba3 or samba4. Getting worse and worse .... I demoted samba3 and then also