similar to: Problems with Samba <=> CUPS and Samba <=> Windows

Hi, I configured my samba 3.0.11 with printing = cups printcap = /etc/printcap when In try to remove a job which are printing, I have a acces deny. But when I look in cups log : [17/Feb/2005:09:49:13 +0100] cancel_job: job #2478080 doesn't exist! If I execute lpq -P xxxx, I see that the #2478080 is the size of file to print. It's a cups format or a redhat problem or samba problem I

Hi, I have a Dell Poweredge SC420 and a SC430. The SC420 has an ICH6 chipset and works ok with Xen. The SC430 has an ICH7 chipset and the SATA detection fails. I''ve tried 2.6.11.10 and 2.6.12.5 kernels, with Xen 2.0.7, Xen-testing and Xen-unstable, all with the same results. I''m using the same hypervisor and kernel binaries, so problems with the compiler environment etc. have

hi All, seems like a kernel problem when I do the following on kernel 2.6.12.5 tc qdisc add dev lo root handle 1: htb default 1 tc class add dev lo parent 1: classid 1:1 htb rate 512kbit ceil 1mbit all works as expected (traffic is limited to 1mbit), but this doesn''t work the same way on kernel 2.6.14.3, and actually only ceil has effect (in my previous message I mentioned

Hi, I am using a ppc-32bit version of linux called crux, with kernel 2.6.12.5 binutils version is 2.16.1 How can i get past this error..??? /usr/bin/ld -r -o .libs/libFLAC.la-19.o .libs/stream_encoder_framing.o .libs/libFLAC.la-18.o gcc -shared .libs/libFLAC.la-19.o -lm -maltivec -mabi=altivec -mcpu=powerpc -Wl,-read_only_relocs -Wl,warning -Wl,-soname -Wl,libFLAC.so.7 -o

Re-post, as I think my last post didn't get through. Sorry, if somebody got it twice now Hi I run in the following make tests error and didn't find any solution to this. - This is a test on the localhost, so I guess, there is no man in the middle attack (hosts file is setup correctly, localhost points to 127.0.0.1) - I don't want to use protocol 1 anyway, so how can I skip

Hi there, finally all seems to be working. Samba 3 as PDC with LDAP Backend. Even ACLs are possible with the command line tool setfacl. These ACLs work fine in Samba and are displayed correctly in the Windows filemanager in the security-tab. But one thing remains unsolved: why can't I set those ACLs directly from my Windows client machine? If I try to modify the ACL I always get a message

Hello list, I've been using PXE Boot for quite some time now and it has been working without any problems. I'm using a Biostar M7VIZ mainboard with a VIA KM400 chipset, and VIA-Rhine VT6102 NIC. Yesterday I upgrade the Kernel on my net-boot machine from 2.4.24 to 2.6.12. When I power on the machine it boots up normally. However, when I reboot the machine, the mainboards PXE-ROM only

Hi! Maybe, I found a bug of xen. My system: - domain0 - gentoo - xen-devel-3.0, kernel 2.6.12.5-r1 - domain1 - debian - kernel 2.6.12.5-r1 (2 interface: vif1.1 = eth0 (0.0.0.0), vif1.2 = eth1 (10.0.1.1 + gw 10.0.1.2)) Bridge: xen-br0 (config as 10.0.1.2) include (vif1.2, vif0.0) xen-br1 (config as 0.0.0.0) include (vif1.1, peth0) On server domain1 I use a pppoe server. If a send a pppoe request

Kernel 2.6.12 contains a bad bug. So i need kernel 2.6.12.6. If i build Xen3 with make world it will still download/compile the old kernel 2.6.12. How can i build Xen3 with a newer kernel? Stephan <http://www.buchmesse.de/imperia/md/images/logos/fbm/2003/Logo100s150px.gif> 19. - 23. Oktober 2005 Halle 4.0 / Stand F1305 Reservieren Sie sich bereits heute über unsere Homepage

Author: jpk Repository: /hg/zfs-crypto/gate Revision: e7e07b2f4fcfbe725493f4074f9e9f0d8bfd8e1c Log message: PSARC/2002/762 Layered Trusted Solaris PSARC/2005/060 TSNET: Trusted Networking with Security Labels PSARC/2005/259 Layered Trusted Solaris Label Interfaces PSARC/2005/573 Solaris Trusted Extensions for Printing PSARC/2005/691 Trusted Extensions for Device Allocation PSARC/2005/723 Solaris

Here are the relevant details. all help is greatly appreciated. xenbox linux # uname -a Linux xenbox.localhost 2.6.14-gentoo-r2 #2 Mon Dec 5 16:17:58 Local time zone must be set--see zic manua x86_64 Intel(R) Xeon(TM) CPU 3.00GHzGenuineIntel GNU/Linux xenbox linux # lspci 0000:00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c) 0000:00:00.1 Class ff00: Intel Corporation

Hi folks! Our smb with LDAP PDC now seems to be nearly completed. Just now we found out something very mysterious. We organized some directorys to be used by specific domain groups. If we put a user into a group the user is allowed to access the associated share. So far this works pretty nice. If we remove the user from the domain group the user seems to keep all his rights he got from his group

I wanted to boot gentoo on xen, but it doesn''t work. What can I do? Booting ''Xen 3.0.0 / Linux 2.6.12.5'' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /xen.gz dom0_mem=131072 com1=115200,8n1 [Multiboot-elf, <0x100000:0x641cc:0x27e34>, shtab=0x18c078, entry=0x100000] module /vmlinuz-2.6.12.5-xen-0 root=/dev/md0

http://bugzilla.mindrot.org/show_bug.cgi?id=1357 Summary: SOCKS proxy attempts fail to some servers due to DNS timeouts Product: Portable OpenSSH Version: 4.6p1 Platform: ix86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: sshd AssignedTo: bitbucket at

I modified the CUPS access rights (defined in cupsd.conf). Before that only users of administrative group had access to the printer configuration parts. Now I removed all access restrictions, so that anyone can access all CUPS services (printers, jobs, ...) (we use this, because sometimes we need to hold printers manually ...). But, as I mentioned, I don't find the relationship between this

That was a good hint! Yes, I've installed SP2, and it realy seems to be the Problem. Now I've checked that on a machine with SP1 - and the jobs from the same printqueue are removed correctly there! -------- Original Message -------- Subject: Re: [Samba] Samba 3.0.9 doesn't remove printjobs ? (14-Dez-2004 19:13) From: novosirj@umdnj.edu To: t.pompe@architekt-prinz.at >

A few weeks ago, I upgraded Samba 3.0.1x to 3.0.14a . After the upgrade, all completed printjobs on all 40 printers stayed in samba's print queue (they were removed from the unix-printqueue). When I installed 3.0.20rc2, everything back to normal. But since the upgrade this weekend to 3.0.20, the same thing happens again: no jobs were removed from the samba printerqueue's. Removing

Hello! I'm using samba with CUPS printing (with raw passthru) for a long time now and it worked very well. But after upgrading my samba installation from 3.0.2 to 3.0.9, the printjobs (sent from XP Workstations) aren't removed from the joblist anymore. Means: the job is printed correctly, but opening the printqueue on the XP machine still contains the job (not only mine, but jobs from

Hi, i learned a lot about cups, samba and printerdrivers the last few days and hours. I found a lot of mistakes but i can't change the following situation: I CAN NOT delete printjobs! I can connect to the printers, automatic download the driver, print, stop the printer, start the printer. Any tips, links, hints would be nice. My setup: Debian Sarge - Samba 3.0.14a - Cups 1.1.23. nss_ldap

Jerry, I'm very sorry for this late answer. I should tweak my mailfilters (I didn't expect an answer anymore so I didn't check my samba-mailfolder) That's our situation: - I tried to revert to 3.0.20rc2 and got the error again - I installed 3.0.20 again and rebooted, and the problem went away! (I'm sure that all smbd, nmbd and winbindd daemons were killed before the