similar to: Inter Domain trusts and BDC

Hoping someone knows how to deal with this, as I'm scratching my head. I have 8.3 or 8.4 installed already and they work ok for the most part. Server: FBSD5.4, Samba 3.0.20 Error in smbldap-useradd: camarillo# ./smbldap-useradd -w fums Could not find base dn, to get next uidNumber at /usr/local/sbin//smbldap_tools.pm line 995, <DATA> line 283. Data output during connection to

Hi, Using 1.4.26.1 & DAHDI 2.2.0.2, FSK VMWI devices off a TDM840 work fine. With 1.6.1.[45] & same DAHDI, instead of the FSK spill I get a line polarity reversal. Stutter dialtone is generated as expected. Has anyone else seen this? Is there anything special I need to do for 1.6.1 to make FSK MWI work? Thanks, --Barry

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

Hello, All :) Regarding to incoming caller ID on PSTN line, which one is best supported by asterisk: is it FSK ETSI or FSK US? I bought some caller ID converter hardware (convert DTMF to FSK and vice versa) but still asterisk can not detect it. The converter has a switch FSK ETSI or FSK US This is what I put in /etc/asterisk/chan_dahdi.conf ... cidsignalling=bell cidstart=ring ... If after

Okay, I can't find what might be causing this. Here is what I got: Asterisk server hooked up to a digital T1 line (full 24-channel) via a Digium card. Verizon has turned on caller ID on the first line (I can guarantee it is on as I can hear the FSK tones on this line but not the others). Using zttool an ZapScan() I have determined the following: 1) The RxB/RxD bits toggle from 1 to 0

We are using Bellsouth 8867 phones on our TDM400B FXS lines (asterisk-1.0.3). It has a "Voicemail" light, which appears to be MWI (according to the manual it works with voicemail from the telco that sends a FSK signal). The dialtone stutters when a line has voicemail, so I know that I have the mailbox setting right in zapata.conf, but the light doesn't go on. I am also getting

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

Callerid issue 1) if you run ztmonitor on the fxo line & call in do you hear the fsk tone if yes then we beleive the CAC is passing fsk 2) in chan_zap->ss_thread around line 4154 (current cvs) if you get to the callerid_feed at least once then if you get to chan_zap->ss_thread->callerid_get around line 4163 (current cvs) does this parse fail

Off topic but I am after a DECT phone to connect to my sipura 3000 that has a FSK VMWI light or flashing envelope on the LCD screen. Any ideas Chris

Hello, I was hoping that this would work: http://blogs.sun.com/zhangfan/entry/how_to_turn_a_mirror I have 4x(1TB) disks, one of which is filled with 800GB of data (that I cant delete/backup somewhere else) > root at FSK-Backup:~# zpool create -f ambry raidz1 c4t0d0 c5t0d0 c5t1d0 > /dev/lofi/1 > root at FSK-Backup:~# zpool list > NAME SIZE USED AVAIL CAP HEALTH ALTROOT

Hi all!!! I am trying to stablish a interdomain relationship, but i am having serious problem making samba and nt seeing domains in another network segments. Which is the best and easier way to configure samba to stablish relashionships between domains in differents network segments? For example i have domain A in network 192.168.101.0 and domain B in network 192.168.120.0. They are both under

Hello, The company I work for recently purchased 2 Rhino CB24s and a Rhino PCI-E R4T1. The channel banks are plugged into the R4T1, as well as 2 PRIs from our telco. The CB24s are for all internal analog phones. Most of the phones are setup in "batphone mode", which is "immediate=on" in the DAHDI config. They are set up this way because we are an outgoing call

G'day list, It appears I got ahead of myself in believing I'd solved my CND (caller id) problem. My callerid.c change got it working on one of the handsets I have, but not the other. (Recap: The AU CND standard has an increased delay between the end of the ring signal and the start of the CND FSK data -- it's 500ms in US GR-30-CORE, and around 700ms in AU DC.002/TS030). I've

Hi! Is there anyone that are using a E1-channelbank and have any tips about some type? Im looking at the TE410P and use one port for a PRI (Euro-ISDN, I think we're using some slightly modified version here in Sweden, but I'll check that tomorrow) and connect one port to a channelbank for 30 analogue telephones. It would also be great to get callerid on the analogue phones, so it would

At the risk of being flamed.... Has anyone had any success get the 'El cheapo' Wildcard W100P clone's (?20 flavour) to work with UK Caller ID? I'm not sure what the status of Asterisk 1.6 is with respect to UK caller ID, being that we have an odd method of sending the FSK ahead of the ring, but I'm guessing I can't be the first to ask this? Keeping in mind that cost is

Good morning, I have a digium wctdm24xxp in my asterisk box, i am not able to see the callerid when the call is incoming from the fxo line, i live in Brazil, how can i change the signaling from fsk to dtmf? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Using a TE410P with Zhone 24FXS channel banks to power standard analog phones I can't seem to find out if it's possible to support FSK or voltage type message waiting lamps. I don't want to use stutter dial tone because of the dramatic difference in per phone cost. TIA

Does anyone have personal experience with a 5.8gig wireless phone (system) that has an MWI that WORKS with asterisk via fxs (in my case spa3k) generated MWI. I know the spa3k does stuttered dialtone but not sure if it generates FSK MWI. I see some that state they do but I also see reviews that say they don't. Doug

Hi, We've tried to set two servers PDC Samba 3 + OpenLDAP as following below: Network_1 192.168.42.0/24 Network_2 192.168.43.0/24 PDC1(PRJLINUX1) - 192.168.42.2 - NETBIOS NAME = PRJARQ6 PDC2(PRJLINUX2) - 192.168.43.251 - NETBIOS NAME = PRJARQ5 OpenLDAP 2.2.24 Samba 3.0.14a Backports Deban 3 Woody OpenLDAP: The servers are using the same DataBase and the PRJARQ6 is a Slave from PRJARQ5.

I've looked in the recent archives and haven't really found anything about this so... I'm trying to establish a two-way trust relationship between two local domains. The MS Win2k3 ADS server now trusts my Samba PDC (3.0.23c, Linux 2.6.17) alright but when I try to use /net rpc trustdom establish/ I have a few problems. The key one is that I am /net rpc/ is unable to find a