similar to: tuning samba fot better performance with MS Access mdb files

Hello to everyone in the list, i have a IPCop firewall with vpn service running and just one roadwarrior (xp sp2 pc), everything is fine, but when the remote pc tries to connect (or just view) to the samba file server shares there is no accessible. The other clients of the lan are all visibles. Is there any way to view and share the samba file server through the ipcop vpn or i need to setup a

I work for a company that has a program localy developed, and we were having a problem when we started storing the application on the samba shared drived mabye simular to what you are expereienceing. in ur smb.conf (usuly in /etc/samba/smb.conf) make sure on the shared drive in samba the oplocks are set (example below) ... <insert more smb.conf here> ;================= Clinic

Helo, We use a big fileserver running Linux/Samba as fileshare. We are facing performances problems for which we'd like some advise : Clients are OS2(LanManager) and windows 2000 reading and writing lots of files in the same directory on the fileshare. We currently have more than 80 000 files in the directory (files size is about 100 Bytes). Could you please advise us some Samba tuning

Hi While running an application, I get the following error: fixme:font:RemoveFontResource16 ("mwedn.fot"): stub Is there anything I can do about it? Thanks Wroot P.S. My wine version is the one that comes with Debian Potato (Stable): 0.0.20000109-3 -- Please note: mail sent to wroot@my-deja.com is ignored.

After updating master from 2.7.12 to 3.0.1 I noticed, that agents began spending more time on "File" resources, which I can see from --summarize output: about 40-45 seconds now, and about 25-30 before update. What could cause this problem? I also noticed, that "preferred_serialization_format = b64_zlib_yaml" doesn''t work anymore and "pson" is used by

Dovecot 1.0.0 has been compiled vor Mandriva 2008.0 in the contrib/release tree. Hopefully a backport to the current mdv releases (2007.1 and 2007.0) will follow soon! Thanks Michael! Egbert Jan NL Name : dovecot Relocations: (not relocatable) Version : 1.0.0 Vendor: Mandriva Release : 1mdv2008.0 Build Date: Tue

Dear All, We have an access database running on a Samba share (Samba version 3.0.10-1.4E) with a gigabit connection to the network. The front end of the databases are on the client machines with linked tables stored in a separate mdb file on the linux server. For some reason the database runs very slowly when it is set up in this way. I tested copying a 10 MB file onto the samba share and it

On 11/28/2014 9:23 AM, Klaus Hartnegg wrote: > > Is there anything else that I could try, > or do I just have to stay on protocol NT1 > as long as we still use this old software? > > Klaus Try in [global] acl allow execute always=true -- Regards -------------------------------------- Gerald Drouillard Technology Architect Drouillard & Associates, Inc.

Hi, I just install 2.2.2 in a Red Hat 7.2 with kernel 2.4.16 on ext 3 + lvm. The problem are the locks!!!!!! I've 5 users working in .dbf + cdx (foxpro) files with an 16 bits application. It accesses to the files via DAO 2.0. A lot of times in the days the users gets 'currently locked' messages when the application open the dbf's files with read only access! I desactivated the

Hi! anyone knows where to get some info for kernel (maybe via sysctl) and or samba tuning for high performance ? I have read all the samba docs available, so aim looking for others tips besides the tcp tunings usually applied in smb.conf ? i am setting a server on a client site, with many clients (about 100), and i am using a real server hardware (an HP netserver with xeon procesor@2.8Ghz, 1Gig of

I have a file server running with Samba over Debian Sarge 3.1 R1. This File server store MDB and XLS files. Could anybody give me an optimal setup for my samba server (smb.conf). Actually, the performance is very poor. Thanks, Daniel Arjona Net Admin GENCO Distribution Systems http://www.genco.com/ 8740 Robert Fulton Dr Columbia, MD 21046 Ph: 410-872-0875 X12 Fax: 410-872-0877

Hi all I'm trying to use my Cobol aplication with Smba but i'm getting A LOT OF "OPEN" errors... lookslike system is (or isn't) looking files for read/write. Anybody had this problem? PS: this program isn't mine, it's just for my company made by third company.

Hi all, I am attempting to get Sage to support their software if the files are on Samba (Linux). They (like a lot of people I've heard) say "We don't support Linux, Goodbye." even when the client is on Win98/NT. We have been having trouble on a particular site, and they refuse to support Sage Line 50 if the files are on Linux which is absurd, because Linux is much more

Hi fans, i tryed to use samba to share a paradox database which comes with a special trade programs. On a novell server it works fine. But on the samba share I get a corrupted database after some minutes of multi user access. I've tryed some entries in the smb.conf and I think a have a very conservative setting now. I heared of somebody who uses samba successfully with the same application

Hello, I've read a lot of information and forums concerning the samba performance question, but nothing was helpful. I'm desperate of the situation so I'm writing here hoping somebody could help me. When copying cca 330MB file from server - I can reach rate about 8-11MB/s depending on some mysticals factors, which I can't identify. To eliminate possible network problems, I've

We're running samba in our organization to serve files in a LAN to windows machines (almost XP), and we're having some performance issues with small files. With big files (ie, ISO images), it works pretty well. But, when small files are involved in the transference, problems arise. In the same environment, a Windows 2000 machine (the 'old' server) is able to send data to

Hi. Between 2 linux (2.6.11 client and 2.6.14 server) machines connected by a 100Mb link I get samba performance copying a file from the client to the server through a smbmounted share of around 4.2MB/s Is this to be expected? Or can it be improved (and if so, how?) I've tried tweaking SO_(SND/RCV)BUF (after reading numerous articles on samba performance...), but it doesn't seem to have

I am seeing some extremely slow logons to my SUSE servers. All are configured exactly the same. When I attempt to log on, I can enter my domain (AD) account without any problems. I then enter my password and sit and wait for several minutes until it eventually takes me to my desktop. In attempting to debug the problem, we have been able to see millions of calls to the domain controller. They

Hi all... Last monday i migrated form novell 4.0 to Samba 3.0 PDC. The server acts as a file server for 30 workstations (Win2000) using an aplicattion that combines clipper (with .dbf files) and delphi (uses paradox .px and .db). Its perfomance has been very poor since i changed the server. PLEASE HELP ME, since its in production and i really don know what to do. thanks, sebastian davancens

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have an unsolved problem with WINS, when i was setting the PDC i connected it to a lan (DHCP) to update the OS, and when i changed it to production environment i defined a static IP. Even after clearing the cache WINS still looks for the old ip to get browse syncs. I've seen this issue posted in some threads in the samba mailing list as well as