similar to: Guidence needed....

I am dealing with a FreePBX generated dialplan. I have been following the processing traces attempting to make use of the advice I received here respecting setting a custom ring tone. I have discovered that the context I am using for incoming calls is not used at all during a blind transfer. Thus setting a third ring tone for that situation inside that context is an impossibility. I know now

Hello all, I am new to Linux Ethernet bridging. Let me first start with what I am trying to achieve. Well you see - I am attempting to have 2 main firewall running at the same time - one as a master and the other one as a slave. Yes, I would like to make use of Ethernet bridging in this scenario - as I understand it, all I need are two machines and STP enabled. I am running Debian

That was my initial setup before trying the abbreviations, but anyway: [root at plexvm ~]# nano /etc/fstab [root at plexvm ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Apr 3 14:02:23 2020 # # Accessible filesystems, by reference, are maintained under '/dev/disk/'. # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info. # # After editing this file,

On 4/3/20 12:48 PM, Patrick DERWAEL wrote: > User & pass are present > According to the man pages, workgroup is supported > I have changed it to domain, but that didn't change a thing > > [root at plexvm ~]# cat /etc/fstab > > # > # /etc/fstab > # Created by anaconda on Fri Apr 3 14:02:23 2020 > # > # Accessible filesystems, by reference, are maintained

> Hi all, > > I'm tearing my hair off trying to understand the difference between C7 & > C8 > for mounting a cifs FS with fstab > > I'm building a Plex media server on C8 and duplicated the fstab entries > over from my current C7 installation > My data (music & movies) are on CIFS shares on a Synology NAS. > The packages cifs-utils samba-client

User & pass are present According to the man pages, workgroup is supported I have changed it to domain, but that didn't change a thing [root at plexvm ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Apr 3 14:02:23 2020 # # Accessible filesystems, by reference, are maintained under '/dev/disk/'. # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more

Am 03.04.20 um 18:01 schrieb Patrick DERWAEL: > Le ven. 3 avr. 2020 ? 17:54, Jonathan Billings <billings at negate.org> a > ?crit : > >> On Fri, Apr 03, 2020 at 04:00:42PM +0200, Patrick DERWAEL wrote: >>> //192.168.1.200/mp3 /home/plex/Musique cifs >>> user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 >>> //192.168.1.200/videos

Le ven. 3 avr. 2020 ? 17:54, Jonathan Billings <billings at negate.org> a ?crit : > On Fri, Apr 03, 2020 at 04:00:42PM +0200, Patrick DERWAEL wrote: > > //192.168.1.200/mp3 /home/plex/Musique cifs > > user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > > //192.168.1.200/videos /home/plex/Vid?os cifs > >

On Fri, Apr 3, 2020 at 4:09 PM Patrick DERWAEL <patrick at derwael.be> wrote: > Exactly the same... ??? > > > [root at plexvm ~]# mount -t cifs //192.168.1.200/mp3 /home/plex/Musique > --verbose -o username=plex,password=plex,domain=DERWAEL,ro,auto,vers=3.0 > mount.cifs kernel mount options: > >

Then, what I'd try is 1) With an other directory like /mnt/xxx just to make sure it's not something with /home that it doesn't like. 2) See what it's doing by running it with strace -f mount..... Regards, Simon > Exactly the same... ??? > > > [root at plexvm ~]# mount -t cifs //192.168.1.200/mp3 /home/plex/Musique > --verbose -o

On Fri, Apr 03, 2020 at 04:00:42PM +0200, Patrick DERWAEL wrote: > Hi all, > <snip> > > These are my current fstab entries on the C7 box > > //192.168.1.200/mp3 /home/plex/Musique cifs > user=plex,pass=plex,ro,auto,vers=3.0 > //192.168.1.200/videos /home/plex/Vid?os cifs > user=plex,pass=plex,ro,auto,vers=3.0 > > > On my C8: > > [root at plexvm

> That was my initial setup before trying the abbreviations, but anyway: > > [root at plexvm ~]# nano /etc/fstab > [root at plexvm ~]# cat /etc/fstab > > # > # /etc/fstab > # Created by anaconda on Fri Apr 3 14:02:23 2020 > # > # Accessible filesystems, by reference, are maintained under '/dev/disk/'. > # See man pages fstab(5), findfs(8), mount(8) and/or

Exactly the same... ??? [root at plexvm ~]# mount -t cifs //192.168.1.200/mp3 /home/plex/Musique --verbose -o username=plex,password=plex,domain=DERWAEL,ro,auto,vers=3.0 mount.cifs kernel mount options: ip=192.168.1.200,unc=\\192.168.1.200\mp3,vers=3.0,user=plex,domain=DERWAEL,pass=******** mount error(2): No such file or directory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)

Hi all, I'm tearing my hair off trying to understand the difference between C7 & C8 for mounting a cifs FS with fstab I'm building a Plex media server on C8 and duplicated the fstab entries over from my current C7 installation My data (music & movies) are on CIFS shares on a Synology NAS. The packages cifs-utils samba-client samba-common are installed, up to date etc... These

On Fri, Apr 03, 2020 at 04:00:42PM +0200, Patrick DERWAEL wrote: > //192.168.1.200/mp3 /home/plex/Musique cifs > user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > //192.168.1.200/videos /home/plex/Vid?os cifs > user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0 > //192.168.1.200/series /home/plex/S?ries cifs >

Could people who have been having issues with Portable OpenSSH and Kerberos 4 please try the following patch. You will need to run "autoreconf" (i.e you will need autoconf installed) and then run ./configure again. Index: configure.in =================================================================== RCS file: /var/cvs/openssh/configure.in,v retrieving revision 1.267 diff -u -r1.267

Dear OpenSSH developers, Hi, taking the liberty of sending this to your mailing list in the hope someone will be able to help. The KTH version of Kerberos 4 was the only one I was able to find. In case you don't want to look at all the stuff below, the situation is briefly that I am trying to compile openssh with kerberos 4 support, which it apparently has. However, it can't find krb.h,

On Sat, 1 Aug 2020, Todd Benivegna wrote: > Also, this is what I found in the syslog on one of the machines: > Jul 31 18:33:29 plex upsmon[970]: UPS ups at 192.168.1.70 on battery > Jul 31 18:33:34 plex upsmon[970]: UPS ups at 192.168.1.70 on line power > Jul 31 18:34:04 plex upsmon[970]: Executing automatic power-fail shutdown > Jul 31 18:34:04 plex upsmon[970]: Auto logout and

On 8/1/20 11:25 PM, Todd Benivegna wrote: > I'm hoping that someone can shed some light on this… I have a Synology > NAS (DS416) that has a feature where you can enable a “Network UPS > Server” which is a NUT server.  I have been trying to get the Synology > to shut down three Ubuntu 20.04 servers that I have. While it does > work when I test it out manually, sometimes when

On 8/12/20 3:42 AM, Manuel Wolfshant wrote: > On 8/12/20 3:20 AM, Todd Benivegna wrote: >> Hi everyone, >> >> Well, we lost power here again.  I was not at home, but I guess a >> dump truck smashed into some power poles and took out half the city; >> actually tripped most of the breakers in the panel.  Anyways, the >> power was out for just a few seconds