similar to: Remote subnet browsing using Samba for WINS.

Note: LMB = Local Master Browser DMB = Domain Master Browser Have Samba 2.2.7A running embedded in a variant of ucLinux. My interest was only to use Samba as a WINS server. I've set up the SMB.CONF with this config. for one test: wins support = yes local master = no domain master = yes preferred master = no os level = 0 I've set up the SMB.CONF with this config. for the other

Hello, I have been searching for answers now more then a week, but I cannot find a proper solution. Please help me with this: Scenario: Two differnet subnetted networks (1 and 2) connected by a cipe tunnel between two linux Samba boxes over the internet. On network one (1) is a Windows NT PDC installed which currently is the DMB for it's domain (1). On network two (2) one of the linux

PROBLEM: Cross-subnet browsing is not working. Browse lists on all machines contain only the machines on the local subnet. SUMMARY OF ANALYSIS: The Local Master Browser (LMB) running Windows XP (ZAYIN) never contacts the Domain Master Browser (DMB) running Samba (BETH) to initiate a synchronization of browse lists.

Hi everyone, I think I solved it: - I installed WINS on both sides on the PDC's (Samba on the one end, NT on the other). - On both subnets the clients are configured by dhcp to use their own PDC's WINS as their primairy WINS server and the WINS on the remote PDC as their "secondairy" WINS server. - TCPIP configuration on the Windows NT PDC configured to use it's own WINS

My network looks like this: internet 192.168.0.0/24 router ----+----+----+----- internal 192.168.5.0/24 | | | router ----+-----+------+- LNB--->mswin | | (also a | | | client | | samba | | .... | | server) | | samba | | samba

My network looks like this: internet 192.168.0.0/24 router ----+----+----+----- internal 192.168.5.0/24 | | | router ----+-----+------+- LNB--->mswin | | (also a | | | client | | samba | | .... | | server) | | samba | | samba

Hello, As subject says I am working on browsing and access servers, which are dispatched on two subnet, in one workgroup named "WORKGROUP". First here the network : ( I don' t use ASCI art 'cause I am not an expert on that and it may not be printed as it was emailed. ) So, there is five machine : - one, under debian 6, which is the gateway - two, under

I'm trying to set up cross-subnet browsing using Samba on a Linux box and a Sparc UltraEnterprise with Win95 and NT Workstation clients. I'm using the Sparc as the domain master and also as the WINS server on the 108 subnet. The Linux box is the local master on the 46 subnet. Both are running Samba 1.9.17alpha4. I can see the conversation between the two samba servers and the browse

Hi How do I get the following browse-setup to work? --------- | A | |Linux | --------- WG1 192.168.10.0 | | WG2 192.168.10.0 ---------------------- ----------------- | | | -------- -------- -------- | B | | C | | D | |Win98 | |WinNT | |Win98 |

I have been having a heck of a time getting cross subnet browsing to work properly. After MANY hours hunting through source and debug logs, I have FINALLY found the source of my browsing issues. My Samba nmdb properly becomes the LMB for my segment on a WAN. I VPN to my servers at the home office and Samba attempts to sync with the DMB. nmbd properly locates the DMB via WINS over the

If I have a client that wants to enumerate and access shares on a subnet, and that client knows the IP of the WINS server, is there any need for the client to use the "browsing" services of a DMB or LMB? What is the order of operations of the client? Here is what I imagine to be the case: 1. client asks LMB for a list of all available shares 2. LMB sends client the list of all known

Hello ! I have a problem of syncing browse lists between DMB and LMB. The topology of ours network is as follows: Linux Network comma(Linux, DMB, WINS) vol(Linux) door(Linux, LMB) | | | | | | | | | --------------(195.226.226.16/28)------ | | | | | | | --(local net

hi there, can please anybody help me solve my little problem ? I have about a dozen separated networks connected to my local lan via isdn dial-up (on-demand). I am running linux kernel 2.0.36 and samba 2.0.0 (2.0.2 doesn't work either). There is a linux-box running samba 2.0.0 connected to every remote network. The Clients are always Win95/Win98/WinNT. Local browsing seems to work perfectly.

Hello, I have the following setup and problems and wanted to ask if anyone could help. Network 1 -- 192.168.1.xxx ----- Network 2 -- 192.168.2.xxx |------ Switch with port based vlan and a Samba Server which | | is placed in all port based vlan's and has ip aliases | |

hai, i need following topics for your help give the full articals.pls send . thanks prabhukumar On Mon, 2006-10-02 at 12:03 +0000, samba-request@lists.samba.org wrote: > Send samba mailing list submissions to > samba@lists.samba.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.samba.org/mailman/listinfo/samba > or, via email, send a

Hi, I'm using Samba 3.0.21c with PDC and severals BDC in different subnets. I'm triing to use Wins servers on all the BDC servers and on the PDC. The problems occurs in the network browsing. I'm able to see all computers with the PDC on the different subnets but I just can see local servers in the network neighborhood on BDC When starting BDC i've got the "unable to find

I am still trying to make samba work over a WAN with multiple workgroups although I am just about to throw in the towel. I had hoped to find a solution that would permit a Windows PC to browse a (MS) workgroup (ie retrieve the browse list from the workgroup master browser for a remote (MS) workgroup when that MB is NOT a samba server). Since WINS only provides the broadcast address of the remote

Referencing: http://www.linuxtopia.org/online_books/network_administration_guides/samba_reference_guide/17_NetworkBrowsing_34.html I've got two subnets (192.168.2.1 and 192.168.1.1). All the machines on both subnets are running XP Home or Pro and are all part of the same workgroup (WORKGROUP). I've added an OpenSUSE box on x.x.2.1 and have set it as the WINS server with a very simple

I want a workgroup that spands two IP subnets. My configuration is: INTERNET | __eth1__ |-----------eth0|________|eth2---------------| 192.168.0.0/24 Gateway 192.168.1.0/24 <------------------------------------------------> WORKGROUP eth0:192.168.0.1 and gateway of the

Hi, I'm using samba 3.4.7 as a domain controller. Browsing network works fine, but sometimes ( about one week ), my PC can't browse more my Domain (no workstation saw). If I restart samba, all works again. I have read the samba doc on browsing http://www.samba.org/samba/docs/man/Samba-HOWTO-Collection/NetworkBrowsing.html My configuration seems ok, local master yes, preferred master