similar to: Samba (old) and shared printers on MS Win 2003 SBS

Samba 3.0.9-2.3 on Suse 9.2 I'm still getting errors copying to my samba box: Often the first attempt to copy to it fails seemingly before it's copied anything. When this happens, there is a zero-length file created with the right name. If I retry the copy immediately and reply Yes to overwrite the zero-length file, it usually proceeds without problems. Many times the copy just goes

I have a samba 3.2.3-0.1-1882 server running on Suse SL11.0. It's out of the box, just the way YAST builds it. Pardon the extremely basic level questions here. The intent for this server is basically just file and print services. (It's defined as a BDC, I think, because I didn't do that on a previous install and I couldn't get name service (wins) to work right. Wins works

I have Samba 3.0.9 on SuSE 9.2 on a P-III-500 with only 352mb of RAM. The share I'm copying to is on a SCSI RAID array handled by a Compaq Smart-2/P RAID Controller (rev 04) as identified by lspci. The RAID is all LVM and the share is ReiserFS-- maybe not the best choice for something which is so slow to write to. Anyhow, the problem is that when I copy to the share "movies" it

I'm trying to get Samba 3.0.9-2.3 to work under Suse 9.2. This my very first Linux install and I'm a little at sea here. There are so many things that could be wrong I don't know where to start. The Windows machine I'm using as a client has TCP/IP, file/printer sharing, and Client for MS networks. He can't see the linux machine's ("Tolkien") shares, but he

Can anyone tell me what to do about the messages I'm getting, or should I ignore them? I think my SuSE 9.2 box is configured to expect a doman, and there isn't one, just a workgroup. Most things seem to be working ok, except for the messages: tolkien:/var/log # tail messages Apr 1 00:43:05 tolkien nmbd[3962]: Unable to sync browse lists in this workgroup. Apr 1 00:56:28 tolkien

Well, I WAS puzzled by this persistent error. Then I stumbled onto something and I might have fixed it. It looks like with an XP client, XP might be trying to renegotiate which port to talk (445 or 139) over at the start of every transaction. Whichever one answers first is used for the rest of the transfer. I added this to smb.conf and restarted samba: smb ports = 139 I can't tell if

I don't know if this is a Samba question or an OS question. I'm working on an embedded project (microcontroller, limited RAM) that reads files from a FreeBSD/Samba (FreeNAS) box using TCP/IP transport on port 445. They're MP3 files so they're several MB at least. If I request 512 or 1024 bytes each time, I get 1024 bytes back from Samba every time. That's good. But, if I

hi all i'm experiencing some really funny behavior on our samba server (CentOS5, Samba Version 3.0.25b-1.el5_1.4) from time to time, our xp/2000 users (our workstations are xp/2000 based) are reporting that while they try to copy a file from one location of the file server to another, they are presented with the the error.... "the specified network name no longer exists" if they

It work's OK but. When I installed a wireless acces point Linksys it does not work. I disabled the firewall in the acces point but with no result. Can anybody help me??? Alejandro G. Schujman AGS Computaci?n y Sistemas contacto@ags.com.ar MSN agschujman@hotmail.com 0341 4219625 Movil 0341 15 5410122

When i try to swap files between disks on my server using samba i get errors: then windows reports "The specified network name is no longer available". Sometimes the copies are fine other times files just wont copy. Hardware checks out fine. Ive even replaced the network cable between server and switch thinking that might be causing the problem. Ive included a ethereal cap of the

I have a user w/ puzzling error. We have not been able to get a tcpdump or significant samba log, but I'm posting to see if anyone else has seen this. I did find some older posts that point to possible client issues. We're running samba 3.0.25b on RHEL4. The user reports: I am getting an error whenever I want to make a copy of a MS Excel file on my shared network drive: (From

Hi @all, are there any problems known with 3.0.21c and bigger video files (mpg and wmv greater than 700 MB)? Received the information that these files cannot copied from XP to Samba (W2K is okay). Error message is the well known: [2006/03/28 18:03:36, 0] lib/util_sock.c:get_peer_addr(1225)getpeername failed. Error was Transport endpoint is not connected To eleminate network problems the

I just recently installed a second hard drive in my Samba server with the hopes of sharing it with the rest of my home network. It seems like Samba can not get the correct permissions to the drive, however. I have the drive mounted under /media/public, and when I try to map a share directly to it and open the share with a client, I get an NT_STATUS_BAD_NETWORK_NAME error. When I map the

I did a make deinstall and a reinstall to upgrade samba from 3.0.9 to 3.0.11 last night at the office i work at and now i get this in the logs. I am sure this has been asswered 100 time on this list but no one can connect to the shared drives. This leave everyone point very angry fingers at me so please help here is the output of the logs. [2005/03/10 12:18:20, 1]

Duncan: You may have it right-I took one phone and set the ring time to 60 seconds. I now get about 4 rings on that one. I wonder how I can change the timing source. Thomas M. Peters | Sr. Systems Administrator | tpeters at mcts.org<mailto:tpeters at mcts.org> Desk: 414.343.1720 | Helpdesk: x3400 or helpdesk at mcts.org<mailto:helpdesk at mcts.org> Milwaukee County Transit System

The line you commented out was writing errors to /var/log/asterisk/messages The problem you are having is the logging to /var/log/messages via syslog. It appears that Asterisk is sending verbose logging out to syslog even though logger.conf does not have syslog configured. I am not sure why Asterisk is doing that, and I do not want to play on a production system. I added a filter to the

Have a samba 3.0.22 joined ADS to a SBS windows 2003 R2. I am trying to get the SBS Backup to use a samba share. Username TPMMLAW\SBS Backup User is invalid on this system TPMMLAW is the domain. How would I map the "SBS Backup User" to a valid unix account. Any pointers? Vernon

Hi, Addition to my message below.. Computers which doesnt login to the domain controller at startup like windows xp home ed. , dont seem to have this effect. It seems that you have to keep the connection up and running on the xp profi pc's to stop this problem from happening. ??? Regards, Martijn -----Oorspronkelijk bericht----- Van: samba-bounces+martijn=gova.info@lists.samba.org

Hi everybody, I have a network which consists of a linux data server, running Samba, a windows 2003 sbs, and a few xp professional clients which login to the domain server (2003 sbs). On the linux box, samba is running, this pc is always on. When i start the client pc (xp profi) and login to the domain, i can access the samba shares at full speed. Now the problem: When the xp profi client is

Nobody any idea on where to start looking for this ?? Thanks -----Oorspronkelijk bericht----- Van: samba-bounces+martijn=gova.info@lists.samba.org [mailto:samba-bounces+martijn=gova.info@lists.samba.org] Namens Martijn Hazenberg Verzonden: maandag 6 maart 2006 14:57 Aan: samba@lists.samba.org Onderwerp: RE: [Samba] connecting to samba from 2003 sbs domain client runningxpprofi Hi, Addition to