similar to: v3.0.4 and remote browsing over VPN

---------------------- Forwarded Message: --------------------- From: atters@mchsi.com To: samba@lists.samba.org Subject: [Samba] v3.0.4 and remote browsing over VPN Date: Thu, 04 Nov 2004 22:19:52 +0000 Greetings All, Here's my situation: I'm attempting to connect two Samba v3.0.4 (on slack 10) boxes over a VPN/Firewall for cross-subnet browsing. Side "A" of my

Hello, I have compiled v3.0.4 of rsync per http://www.bombich.com/mactips/rsync.html. Unfortunately, I can't get rsync v3.0.4 to work properly. If I execute this command on the target Mac, I receive this error. sudo rsync -An --progress --log-file=docs_transfer server.domain.com:/Volumes/File_Storage/docs /Volumes/File_Storage rsync: on remote machine: -vnpAe.Ls: unknown option rsync

Hello, I used Lingon for Leopard Server to create a launchd job that would execute the following rsync (v3.0.4) command when logged in as admin at 12:01 AM each day. sudo rsync -aAHvWX /Volumes/File_Storage/docs/ /Volumes/File_Storage_Mirror/docs When launchd executed this command, it did not work. The system.log file reads "Exited with exit code: 1". It called it at 12:01 AM,

Hi list, I am trying to create a VPN between two different locations. On the first location we have a cisco pix 525 Natting the internal 192.168.100.x network, while on the second location we have a Centos3 box Natting via iptables the internal 192.168.10.x netowrk. My goal is to connect this 2 over the internet via IPsec. I created the IPsec Net2Net via the network configuration graphic

Hey All, Sometimes we are running into issues with calls randomly being disconnected. We have a couple of phones is in a remote office. We have a PIX-to-PIX VPN setup between the offices. I know neither of these devices provide QOS but we usually don't run into any problems. I notice this problem when we are in a conference call with one of the employees at the remote office and a

I have been trying to put together a SAMBA installation with winbind that will link to an existing ActiveDirectory, to allow UNIX (Solaris 9) hosts to accept logins from people using AD credentials. This has been slow going. Since I am running Solaris 9, Sun took a while to re-enable non-standard PAM/nsswitch.conf entries so winbind would work at all, but this part is now fixed. I think I

Hi, I have run a FileServer with Samba 2.2.8a and want to upgrade to 3.0.4. I had successfully compile and build the new version and the most of all works fine. Now i want to set my old SID to the new System how is described in this mail (http://lists.samba.org/archive/samba/2003-June/068765.html), that not all clients have to reinclude to the domain, but it does not work. old System

Hi, I hope that this is a quick answer, as it's probably been answered many times before and I'm just missing a very minor setting in my config. I have just setup a samba server(ver 3.0.4) on a Redhat Enterprise Linux Box ES3. The box has been setup as a member of a Windows NT4 domain, it's to be used as a fileserver for users on the NT domain. I have configured samba to use domain

Anyone got a resource on setting up a CentOS box to connect to a Cisco PIX 5xx VPN using IPSec? I don't know if it matters but an important part of functionality would be split tunneling, I need to maintain that from the windows side of functionality. Thanks! jlc

IF you are not stuck to IPSec, you might want to take a look at OpenVPN (www.openvpn.org). I found OpenVPN easier to install than FreeSWAN (an IPSEC VPN) and have setup an OpenVPN solution between my German office and our mainoffice in a matter of hours. Thom van der Boon E-Mail: Thom.van.der.Boon at vdb.nl ===== Thom.H. van der Boon b.v. Havens 563 Jan Evertsenweg 2-4 NL-3115 JA Schiedam

I've got multiple satellite office all linked back to the main office via VPN. Each office has their own asterisk server which registers back to the main office's Asterisk server. Each office also has a 1Mb downstream / 384k - 768k upstream connection. The branches are using Speex for their connections back to the main office. The issue I'm having is that there are times that

hi, i was reading a rsync log file, and i discovered that the summatory of each file transfer(in bytes) doesn't match the total transfer for the operation. for instance: 2005/09/28 22:02:06 [1072] rsync to NOC from nocbox (63.110.176.221<http://63.110.176.221> ) 2005/09/28 22:02:07 [1072] IdsProcessor/IdsProcessorLogs/ 2005/09/28 22:02:11 [1072] IdsProcessor/SysLogs/Heartland-Bank/Pix/

hi guys, found this logs on my mail server about possible fraud attempt and phising. is this normal ? Found ip-based phishing fraud from 10.2.0.0 Found ip-based phishing fraud from 255.255.255.255 Found ip-based phishing fraud from 10.1.0.0 Found ip-based phishing fraud from 255.255.255.255 . MailScanner has detected a possible fraud attempt from "ee.ee.ee.ee" claiming to be

Hi, We have a shorewall firewall running on SUSE 10. We have three nic''s, Lan, DMZ and Internet. We also have a Cisco Pix 506e. We moved from sending all our traffic through the pix to using the Suse box yesterday. The PIX is in the DMZ, with a connection to the LAN switch, the idea being that VPN users can connect to the pix to the lan. The Pix is on the 10.0.1.x subnet, the lan is

Hi, I've searched thru this list and saw other mentions of this, but no real solid responses on how to fix it. I've got a linux box (red hat 7.2) running Samba 2.2.5. I've got 2 NICs in the server, 1 to my internal network, and 1 to a PIX firewall/VPN that connects to an office across the state. The Linux box is the only thing plugged into that PIX. (I've verified everything

Hello, long time lurker, first time writer.... We have the following set up ITSP | | Internet | | Cisco 2600 | | Switch----Asterisk Server running 1.0.9(has public ip) | | Cisco 515e Pix Firewall running Pix OS 5.3(run's a class c 1-to-1 nat and pat) | | Grandstream GXP-2000(run latest fw from grandstream site 1.0.1.9) The grandstream registers with the public asterisk server fine. I even

Hi, I asked this last week but i didn't get any answer So i will elaborate on my question. I need to setup a pix 515 firewall (running 7.2.2 OS) to allow sip traffic thru it from a sip phone wherever i may be. The pix is where all my servers are colocated and i will need to connect thru it from softphones / hardphones wherever i happen to be traveling. I need help setting up the pix for

Hello, I am not too familiar with the settings in our PIX (learning though). Here is the only access-list setting that we have in place for Asterisk: access-list acl-prod permit udp any host EXTERNAL_*_IP_HERE eq 5060 In rtp.conf we are allowing ports 10000 - 20000. We are not using SIP Fixup in our PIX due to firmware version. How do I go about adding the ability for udp ports 10000 - 20000

hey friends, I am looking for a free open source software (web based or application) through which I can monitor the Pix Firewall. What it should show Interface status or traffic , VPN Connectivity status, CPU Status, Memory Status etc. I am also running DHCP server on Pix Firewall (due to some reasons) If it can monitor that also means showing how many IPAddresses has been assigned, to whom,

When trying to boot the OpenSolaris b75a dvd in a pv domU (using the linux phy:/dev/cdrom device as the source for the boot media), running on an Ubuntu 7.10 x86_64 dom0 box with xen 3.1.0 hypervisor, using the following config file... ======================================== # # Hostname # name = ''solaris-install2'' # # Kernel + memory size # kernel =