similar to: Samba 3.0.4. on Solaris 5.7

Hi, Samba world: It is my first time to use samba to share a folder from a solaris 7 to our windows 2000 clients. After I have the following, I could not see the unix share point. Your help is highly appreciated! 1) Install samba 2.0.5. 2) done the following: Edit /etc/services and make the following changes. Immediately after the line which reads: sunrpc 111/tcp rpcbind

-------------- next part -------------- Hello everybody!!! First of all I must say that I'm not an English speaker, so this text may sound a little extrange. I apollogize..... Well, I'm having problems with the SMB printing system. I have spent a lot of time (nearly 15 hours and a houndred of configurations) in it but I could not use it as a printing server. System Configuration: One

I have the default installation of samba (2.0.5) that came with Caldera OL 2.3, but it doesn't seem to be starting up properly, nor is SWAT working. When I run the script 'samba start', I get the message "Starting samba: smbd nmbd", but when I check the running processes, only nmbd shows up. Running smbstatus gives me the message "Couldn't open status file

I'm having a problem with Samba v2.2.8a under Solaris with tcp wrappers. Here's my current setup: Software: Solaris8 w/current recommended patch cluster gcc v3.2.2 Samba 2.2.8a with the following config directives: --prefix=/server/sw/18 --with-acl-support tcpd v7.6 Inetd.conf lines: netbios-ssn stream tcp nowait root /opt/common/sbin/tcpd /server/sw/prod_samba/sbin/smbd

share in the samba box, from the PDC server itself. The log.winbindd and log.nmbd are empty. [2001/08/08 13:11:28, 3] smbd/reply.c:reply_sesssetup_and_X(865) Domain=[EERDBR001] NativeOS=[Windows NT 1381] NativeLanMan=[] [2001/08/08 13:11:28, 3] smbd/reply.c:reply_sesssetup_and_X(876) sesssetupX:name=[administrator] [2001/08/08 13:11:28, 3] libsmb/namequery.c:resolve_lmhosts(733)

Hi, I tried to map solaris to PC running 3.1 or 3.11 or so. That PC sees another solaris as it is mapped to it. No problem there. But to map to it the new solaris 5.7 system with latest samba i get "receiving computer is not responding". I did "ps -aef|grep smbd" and see it not running. nmbd is running. I followd the instructions as follows ans I see no smbd running. nmbd is

I've seen this problem mentioned before on the list, but I've never seen an answer.... I'm running samba on a pc running linux 2.0.30, 32 meg ram. (pentium 133) I start smbd out of inetd.conf: netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd nmbd netbios-ssn stream tcp nowait root /usr/sbin/tcpd /usr/local/samba/bin/smbd -l/var/adm/smblogs/log -s/usr/local/samba/lib/smb.conf

I have tried to set up Samba on my Solaris 2.5.1 with 2 interfaces (le0, le0:1 - one network card with two IP addresses). But all I could see is throught the default ports 137 and 139. In my /etc/inetd.conf, I have: netbios-ns dgram udp wait root /opt/samba/bin/nmbd nmbd -s/opt/samba/lib/kes.smb.conf netbios-ssn stream tcp nowait root /opt/samba/bin/smbd smbd -s/opt/samba/lib/kes.smb.conf

Greetings all, See below for postinstall and remove scripts for the above release for those who may have wondered why they didn't work. Minor changes, but those below work. Find these scripts in ../samba-1.9.18p10/packaging/Solaris/pkg-specs. Regards Anthnoy :::::::::::::: postinstall :::::::::::::: #!/bin/sh # install samba nawk '/^netbios-[ns]*[ ]/ {next} {print} END { print

I am getting errors when I try to start smbd which say that port 445 is already in use, but nothing else is using it. In the log, the full error is: -----start log.smbd---- [2004/02/02 11:03:53, 0] lib/util_sock.c:open_socket_in(662) bind failed on port 445 socket_addr = 0.0.0.0. Error = Address already in use ------end log.smbd----- In my /etc/services file, I have these entries:

I'm currently running version 2.0.7 of samba(CIFS9000). I have HPUX 11.x installed on the samba server. When I try to run this from inetd it doesn't work. I can run a startup script that runs the smbd as a daemon and it works fine. But if I try to run it from inetd it won't start. The previous version of Samba 1.9.18p10 that I had on this server worked fine. Is this a bug in

----- Original Message ----- From: Adrian Stokes To: John H Terpstra Sent: Wednesday, December 18, 2002 1:43 PM Subject: Samba problems with Sco Openserver Hi John, I emailed that chap you suggested, just got an out of office reply. I think I'm halfway there though, I ran the following command #smbclient -U% -L localhost Added inetrface ip=192.168.x.x bcast=

Hello I've two strange problems: - smbd I've attached you my smb.conf, inetd.conf and my log file. Sometimes smbd and nmbd run and somtimes only nmbd run (I check it with ps -ax). But I have access over my shares (I test it with my Win95 machine). Also in my log file there're some error messages (I don't now from where the came). - login scripts My scripts won't run but if

Hi, For no particular reason, my Samba service didn't start yesterday, when I went to start it by going in the /usr/local/samba/sbin and then typing SMBD I got an error "permission denied" and something about the port 139 (sorry I don't have the whole error message) No changes were made on the box. I started looking over the web and I found an something out something to

Hello guys: Im having trouble with my SAMBA server ver. 2.2.8a, the issue that i have is: this server is presenting shutdowns of the samba deamons (smbd and nmbd), in the earlier version i putted this lines in the inetd.conf file netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd ?D netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd ?D swat stream

Help me ! I cannot start smbd, it immediatly stops, I've got in my log.smb [1999/05/19 14:53:43, 0] lib/util_sock.c:open_socket_in(709) bind failed on port 139 socket_addr=0.0.0.0 (Adresse déja utilisée.) And then It stops, I cannot launch smbd. I my /etc/services, I've got the two lines : netbios-ssn 139/tcp netbios-ns 137/upd and in /etc/inetd.conf netbios-ssn stream tcp

I just install samba.1.9.18p10 version on my Solaris 2.6. Our network setup: the SAMBA server is on the same network with my NT Server PDC and NT workstation within PDC domain. I also have another subnet that have WinNT and Win95. We also use NIS domain server for our UNIX home user account. smb.conf: workgroup = NTPDC_NAME server string = SMBSERVER_NAME host allow = .... load

I'm trying to start SAMBA from the inetd. I have added the port numbers to /etc/services: netbios-ns 137/udp netbios-ssn 139/tcp To my inetd.conf I have added: netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd After this I killed any samba-prosecces, and refreshed the inetd with:

I have a Solaris box and Windows 2K box connecte through a hub, along with a DSL modem. I cannot get the two boxes to work via Samba, here is the relevant details. The status report from SWAT # Samba config file created using SWAT # from localhost (127.0.0.1) # Date: 2001/03/02 12:54:01 # Global parameters [global] netbios name = MARISOL server string =

Hi, I am having some troubles setting samba up nicely on my Slackware 7.1 machine. It is currently just a web/ftp server mainly for my personal use at home. I downloaded the tarball samba-2.0.7 and did everything to install it "properly." I edited services to include: netbios-ns 137/tcp # NETBIOS Name Service netbios-ns 137/udp netbios-dgm