similar to: conflict between Realtek 8139 (client) and3c2000T(server) NIC's with Samba?

hi, Problem seems to be solved. I could kick myself for not trying the obvious first: updating the drivers for the Realtek card by downloading the latest from their site: http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=16&Software=True The problem seems to be solved. thanks for the fast response. cheers, Bart van Dicjk

Hi, Last friday I changed the NIC in two of our Samba servers from a 3com 905b (100mb) to a 3com 2000T (1000mb) to take advantage of our new switch which supports gigabit. One of the workstations (XP SP1, with all subsequent patches and hotfixes and with an onboard Realtek 8139) then started to have problems with the two Samba servers with the new NIC's. It could see the network

Hi all, I swapped a Realtek 8139 100M Net Card for a Realtek 8169 Gig Net card in a Centos 5.6 system. After reconfiguring the network settings I find that on boot up the 8169 interface does not start. The startup script says something like "The 8169 is not available..." ifconfig -a shows a device with the right mac address called __tmpsomethingorother I can get it going if I

Hallo, rid, Du meintest am 13.06.13: > hi, realtek 8139 \ 8100sc NICs can not be used PXELINUX 5.0 -> > 6.0-pre4 version boot, please verify. tested with 6.0-pre4 and an "etherboot" disk for realtek-8139: no problem. Viele Gruesse! Helmut

Hello everybody, for just one week I try to install three servers on an OpenSuSE 10.3 dom0 equipped with 4 NICs. One server is an OX using the onboard NIC via xenbr0. This server runs!! For my IPCop server I intended to use the three remaining NICs (Intel Pro100/S, 3Com 3C590, Realtek RTL-8139). These three NICs should be used natively by my IPCop. So I tried to use the pciback driver. I wrote a

Hi Matt, Any decent quad, quad-core Opteron system should be able to handle it with ease! :) -- Regards, Hilton Travis Phone: +61 (0)7 3344 3889 (Brisbane, Australia) Phone: +61 (0)419 792 394 Manager, Quark IT http://www.quarkit.com.au Quark AudioVisual http://www.quarkav.net http://www.threatcode.com/

Hi all, Our intranet's WAN interface just stopped working yesterday, and I can't figure it out. The machine has a Gigabyte motherboard, with on-board RTL-8110SC/8169SC Gigabit Ethernet and D-Link PCI NIC for the LAN side. I can get into the LAN side without an issue, but can't see the WAN side at all. [root at intranet ~]# ifconfig eth0 up eth0: unknown interface: No such device

Hi, Could you please explain the :limit to me? I thought I knew what it was but now it seems I''ve misunderstood something. >> Fooditem.find_by_contents("*quark*", {:limit => 10}, {:conditions => ["origin = ?", "fda"]}).length => 1 >> Fooditem.find_by_contents("*quark*", {:limit => 2000000}, {:conditions => ["origin

Hi everyone, We seem to be having issues on multiple CentOS 7.3 machines. The problem seems to revolve around polkitd. At some random time, polkitd seems to stop responding on my systems. Along with this, there might be hundreds of defunct pkla-check-authorization processes. If I reboot, then things are fine for a while. I don't see any activity in the unabridged journal to suggest anything

Hi all. Ok, here's the situation. I'm trying to run QuArk under Ubuntu/WINE 1.2. Most programs work just fine. What I'm noticing with QuArk is that the window only seems to recognize the upper left two thirds or so of the screen. It won't draw the actual program window any larger than that. It's as if as far as WINE is concerned, I have a resolution of 1024x768 and

This is related to another earlier post regarding "realm discover" I want to set the timezone to Melbourne/Australia which failed with: [root at sssd-testing ~]# timedatectl set-timezone Australia/Melbourne Error getting authority: Error initializing authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: Timeout was reached (g-io-error-quark, 24) Failed to set time

> On May 22, 2017 at 4:03 PM Quark <zquark32 at gmail.com> wrote: > > > So, I have this error now: > > May 22 08:54:30 ********** dovecot: imap-login: Aborted login (no auth > attempts in 0 secs): user=<>, rip=***********, lip=***********, > session=<***********> > > I found this: https://wiki2.dovecot.org/WhyDoesItNotWork > > I have

Because of Plain text mode, my output example is split across several lines and hence is totally meaningless. If you want to see the example, follow this link : http://download.caoba.fr/r3tb7hxb2pl5/ I marked in red the places where the bug appears. ------------------------- Santiago DIEZ Quark Systems & CAOBA 23 rue du Buisson Saint-Louis, 75010 Paris ------------------------- On Thu, Feb

So I just finished doing a fresh install of CentOS 6.3. The machine has three ethernet ports in it: one on the motherboard (VIA Rhine), and two add-on cards, an Intel Pro100 and an old SMC1255TX. When CentOS comes up, this is what I see in the dmesg output: # dmesg | grep eth e100 0000:00:08.0: eth0: addr 0xf6043000, irq 16, MAC addr 00:02:b3:be:02:87 eth1: ADMtek Comet rev 17

AutoDesk now offers a free 15 day demo CD of AutoCad. I hope some of the talanted wine developers take the opportunity to get the CD and try to get it to work. http://usa.autodesk.com/adsk/item/0,,616392-123112,00.html In my opinion there are two windows application that are more important than others and that is AutoCad and Quark express. Linux does not have good alternatives to theese, and for

On Mon, Jan 10, 2011 at 12:08 PM, Rudi Ahlers <Rudi at softdux.com> wrote: > On Mon, Jan 10, 2011 at 11:49 AM, compdoc <compdoc at hotrodpc.com> wrote: >> I love realtek - the resources they use tend not to conflict with other >> cards or hardware, they don't use much cpu time, the drivers are mature, and >> they don't cost much. What could be better? There

So, I have this error now: May 22 08:54:30 ********** dovecot: imap-login: Aborted login (no auth attempts in 0 secs): user=<>, rip=***********, lip=***********, session=<***********> I found this: https://wiki2.dovecot.org/WhyDoesItNotWork I have this set in my dovecot.conf: disable_plaintext_auth=yes Same error, even when I try to connect port 143 instead of ssl (993). Any

Has anyone tested AutoCad 2000 with any recent wine ? Once upon a time I got Autocad R13 to work, only toolbars and screenrefresh was not working to 100%, then it broke completely, and 10 months ago when I tested with AutoCad 2000 it was still broken. Has anyone done any testing recently ? AutoCad and Quark express are two very important pieces of software for wine, since they both lack

I'm running libvirt under Fedora 28. I would like to attach a USB device to a VM, but when I select "Redirect USB Device" from the "Virtual Machine" menu in virt-manager and then select the device, I get the error: USB redirection error spice-client-error-quark: Could not redirect [device name] at 1-11: Error setting USB device node ACL: 'Not authorized' (0)

Hi! My boss asked me to be able to share some directories on a FreeBSD Samba server with users already created (and used) on a NT 4.0 PDC server. So I followed http://www.sugoi.org/bits/index.php?bit_id=10 I just replaced the Windows 2k part by adding the NetBIOS name of the machine to the NT PDC. When I did the smbpasswd trick it worked like charm: testsmb# smbpasswd -j CH-DOMAIN -r PDC