similar to: boot/root rescue systems with ext3 support

Drive\Ruby Projects\ramf>ruby script/generate model category by/lib/ruby/gems/1.8/gems/activesupport-2.3.2/lib/active_support/dependencies.rb:440:in `load_missing_constant initialized constant RAMF::OperationProcessorsManager (NameError) from c:/ruby/lib/ruby/gems/1.8/gems/activesupport-2.3.2/lib/active_support/dependencies.rb:80:in `const_mis from E:/D Drive/Ruby

Hi, I want to share a partition of an external disk between 3 machines. It is located on a Sun StoreTek 3510 and bound (via multipathing) to all 3 machines. One machine (say mach1) is the node I used to create the filesystem and setup /etc/ocfs2/cluster.conf. I copied the file to the other 2 machines. All use the same /etc/multipath.conf[1], too. All start /etc/init.d/ocfs2 at boot, all are

When I exit from HDT and return to the syslinux menu there's no cursor, but the keyboard still works. -- Kent Robotti <kent.robotti at gmail.com>

Hello syslinux Mailinglist ;) I'm new to this mailing list, the RIP Readme brought me here. I'm quite new to syslinux/pxelinux and im trying to set up some kind of minimal linux which is bootable via lan. I found the http://www.tux.org/pub/people/kent-robotti/looplinux/rip/ project, and what I read in the readme it will fit my needs. Basic infos: Host System running gentoo,

Greetings, I've been a user and fan of SYSLINUX for a couple of years now. I use PXELINUX for a PXE server. I've only been able to boot linux kernel/initrd images and dos bootdisks, however now I'm wanting to create a boot image for the 'Rescue Is Possible' (RIP) linux recovery disk - http://www.tux.org/pub/people/kent-robotti/looplinux/rip/ Previous versions came with a

I'd like to add a few things to rescue mode. I'm tired of having to use a floppy with hardware drivers when ever I need to go into rescue mode and there are a few other utilities that I'd like to add as well. How would I go about doing this? Any pointers to FAQ's or "How to's"? I've done some searching, but haven't found anything recent enough to be

Hi, I am trying to setup my own PXE boot server. I tried several PXE bootable Linux-Distributions. For example if I use the ubuntu netboot image from [1] it works quit well but there are a few other images they do not work in my case e.g.: RIPLinuX [2]. A friend tested this image on his PXE boot server with success. I also checked the download with md5sum. In my case I can see the boot menu [3].

Hi, i did not succeed to get my test computer (Asus A7V8X-X of 2004) to boot from an isohybrid image. I tried http://www.tux.org/pub/people/kent-robotti/looplinux/rip/RIPLinux-7.0-non-X.iso which is obviously isohybrid enabled. The system has a "Promise Ultra 133 TX2" IDE controller which supercedes the mainboard BIOS. To make the system react on the USB stick i set boot option

I'm using the RIP Linux mini rescue distribution. http://www.tux.org/pub/people/kent-robotti/looplinux/rip/ I have modified v. 7.0 for usage on our 32 node Tyan Tiger MPX Linux cluster with a serial console. Because of a bug with Grub on this motherboard when running headless and using a serial console I use the optional Isolinux version 2.08 also included with RIP Linux to boot from a

From: Gene Cumm <gene.cumm at gmail.com> CMenu: Fix cursor on exit from showmenus() Signed-off-by: Gene Cumm <gene.cumm at gmail.com> This fixes the issue in hdt.c32 that Kent Robotti noticed where exiting directly from Menu Mode caused the cursor to not be displayed. This same issue also affects com32/cmenu/simple.c32 and probably others using showmenus(). --- diff --git

Hi! as i know that you like test reports, here are some... Testing environment: CompactFlash card, connected with an USB adapter to a Compaq Evo D310 frontal USB port. This machine boots via USB quite well with syslinux. 3.09 boots ok, no problem 3.10-pre2 does not boot 3.10-pre3 does not boot 3.10-pre4 does not boot 3.10-pre5 locks up pc 3.10-pre6 locks up pc 3.10-pre7 writes

>Hello, > > >I am managing 15 separate boot disks with various network disk images. >These disk images are used for network installs of Windows OS's. >Basically the network boot disk contains dos, the network drive in >question and the connection information to the shared server for doing a >ghost install. > >The problem is the 1.44 disk doesn't hold enough

Harcoding default content of initramfs in the gen_initramfs_list.sh script seems ackward. Move it to a file named: usr/initramfs.default This also fixes a small bug when no arguments was passed to CONFIG_INITRAMFS_SOURCE (-d was passed twice to the script) Idea and bug report from: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> ---

Generate dependencies almost like done by fixdep in the kernel. This teaches make to rebuild cpio image when content has changed. Also restructured usr/Kbuild a little so we better utilise parallel makes (dash, gzip, utils and kinit are now build in parallel). Signed-off-by: Sam Ravnborg <sam@ravnborg.org> --- patch is on top of hpa's linux tree, so path differ if applied to the klibc

Hey all, I've downloaded the latest CentOS 5.0 and the md5sums look good. I loop-back mounted the ISOs and pulled all of the RPMs out into a single dir. I have an existing PXE environment with several different distros to which I added 5.0. RPMs are served from my HTTPS server. I used the isolinux.cfg that was provided and all *looks* good. The problem is that on 4 *very* different

Fix usr/Kbuild so it utilise the new gen_initramfs.sh script which will rebuild initramfs when the content has changed. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> --- usr/Kbuild | 74 +++++++++++++++++++---------------------------------------------- 1 file changed, 22 insertions(+), 52 deletions(-) This patch shall not be applied until my kbuild.git tree is merged upstream. Or it

gen_initramfs_list.sh failed to generate a dependency list when it was supplied the -d option. Restructured gen_initramfs_list.sh to support dependency info with -d. This also fixes a bug where we did not properly process when more than one dir was specified. Finally update dependency info for the -d case (list_default_initramfs) In usr/Kbuild remove "" around CONFIG_RAMFS_SOURCE so the

Basic infrastructure for building klibc. Signed-off-by: H. Peter Anvin <hpa at zytor.com> --- commit 5bba564a5c133369b3e83e5827d053a98cb3c59a tree 11f2acc1f9d845e8764fa790f522b79ea1106b80 parent 378abd8f4d39024ea6c87eb5b54155238f647f0d author H. Peter Anvin <hpa at zytor.com> Sun, 25 Jun 2006 16:58:08 -0700 committer H. Peter Anvin <hpa at zytor.com> Sun, 25 Jun 2006 16:58:08

Probably a simple question, but humor me: Let''s say I have a page (in Rails) that lets a user type a shell command (say, ''ping blah.com'') into a form and it fires off a worker that then updates that page using AJAX (all of this is working so far). How would I correctly wrap the worker in a begin..rescue so that it spits out ''invalid command''

Hi, I have a big index and wildcard query raises an exception. That is all right. The problem is I can not rescue this exception and it bombs right to user page. Why? I am on Linux. Ferret 0.9.3 with C extentions. >> class A >> def self.b >> Book.index.search(''isbn:00*'') >> rescue >> puts ''ok'' >> end >> end =>