similar to: login to samba3 PDC and problem with novell netware client

Hi, I like to know if anyone has ever gotten samba to work on Sun Solaris on a Novell Network. I don't have an issue with installation on Sun Solaris that works fine. But I've never put Samba on a Novell Network Before. Please describe any steps or issue with this. Phillip B. Bruce, Manager > kpmg Consulting > Network Engineering & Integration >

Hi, I am hoping someone can kick me up the learning curve (!) on Virtualization: We have an old piece of data logging software that was written in Turbo Pascal 6 using a file I/O module tuned to Netware and so it expects its data files to be on a Netware server and will not access them locally or via an MS/Samba share - essentially, it uses direct NCP calls for parts of its data access. The

Dear listmembers, recently our sysadmin turned off the support for ipx-protocol. Since then I found no way to mount my home-directory on the net (novell) on my linux box. Using ipx, I had had the same servername etc) I found a lot of discussions about the way vice versa, but no FM I could R to manage around this issue (i.e. mounting a Netware volume on a linux box). Anybody out there having an

Hullo, all. I diligently consulted the suggested reading on the way in: > Welcome to the rsync@lists.samba.org mailing list! PLEASE READ THIS > IMPORTANT ETIQUETTE MESSAGE BEFORE POSTING: > http://www.tuxedo.org/~esr/faqs/smart-questions.html 'Twas a quick read, given that I'm the co-author. ;-> I recently received an odd inquiry from someone I didn't know at all,

Hello Sorry for the newbie question.. I am new to Windows environment. I have setup a Samba -Version 1.9.18p10 on a Solaris 2.5.1 m/c. I want to hook WIN _NT and 95 /98 clients to it. The Win clients are on the same network and are also hooked to other Netware servers. I am not sure how this is done. I have set up entries for the Samba server in the 'lmhosts' file. The

I've studied the books, searched the list archives, etc. I suspect there is someone who can just tell me one thing to tweek, so I humbly beg your advice. Situation: I am playing with/learning Linux, intending to replace our two company Netware servers sometime in the next 6 months. At home, I have an NT4.0/SPC PDC, an NT4.0/SP6 docked laptop, and an HP server with RH7.1 or 7.2 (2.4.??

I have one last RH 7.3 system that I want to convert to CentOS 4, but I can''t find the ncpfs utilities that I used to use to mount Netware shares. Has support been removed from the 3.x and 4? Regards, Paul Berger

Has anybody installed Samba on a Novell 5 Server? I would like to replace the buggy NFS from Novell with Samba. Any hints what to do? Thank you, Mattias Kunkel

I would like to add my case for a wish of IPX support in Samba: We use a number of CNC tool machines whose host is pure DOS based. Don't be surprised that DOS is stilll running somewhere. It is fairly OK when we get to the field of HW and real-time control, unlike Windows and the like... These hosts use IPX to access LAN shares. IPX is here preferable to TCP/IP because of its lower memory

Greetings, I would be grateful if anybody can kindly give a pointer to port a Working netware 3.12 server using Centos >=5.x KVM howto? -- Regards, Rajagopal

Hi all, I need to setup a VPN where home users can comunicate with a Novell network which functions with IPX/SPX. Is there someway i can route this traffic over Tinc? I know tinc has a "switch" and "hub" mode, but does it also route non IP traffic? This would be the setup: [NovellServer] <-_EtherNet_-> [Firewall] <-_Tinc_-> [Homeuser] Can i make tinc route this

I'm getting samba setup, and it seems to be working. I have PDC/BackupPDC issues to resolve, and want to change things so the NT PDC authenticates users instead of setting them up using smbpasswd. Right now, I can access the samba box from Win98 and WinNT workstation with "manually setup" smbpasswd's. I have been testing performance and am a little disappointed, I hoped samba

I'm a software developer at Novell. I have been tasked with porting OpenSSH to the NetWare 6.0 OS. I would like to include my NetWare specific changes,#ifdef'd of course, in the portable releases at some point. Whom should I contact with regard to this? And are there any guidlines I can look at online to minimize any disturbance this may cause to other platforms? Any assistance that

Hello! [Cc to stable@, for wider audience] The plan is two axe two old networking protocols from FreeBSD head/, meaning that FreeBSD 11.0-RELEASE, available in couple of years would be shipped without them. 1) AppleTalk Last time claimed to be supported by vendor in 2007[1]. In practice had very little use since 90th. Discontinued by major routing equipment vendors since 2009[2].

Greetings All: I hope everyone had a fun Halloween weekend (I carved 4 big pumpkins and gave out a bucket full of rubber eyeballs and stuff). I'm hoping somebody can explain the password behavior I've been seeing (and a couple of other things). Here's my setup: An isolated LAN (most clients have modems for dialling out) with one linux/samba machine (RedHat 4.2, kernel 2.0.30,

Hello, I have ported rsync 2.5.5 to Netware and would like to, at least, contribute the binary so that people can download it. It says on the website to use the bug tracking system to do this, but since that isn't working, I thought I would try this. Thanks for any help or direction. Lee

Does this list supports the NetWare version (rsync.nlm)? if not does anyone know of a list that does? I'm having all sorts of issues with this ported version on my NetWare 6.5 server. Thanks Jon L. Miller, ASE, CNS, CLS, MCNE, CCNA Director/Sr Systems Consultant MMT Networks Pty Ltd http://www.mmtnetworks.com.au Resellers for: Novell Gold Partner, Cisco Partner, Peopletelecom, Westnet,

I'd like to migrate a Netware 5.0 serve to Samba and LDAP. I'm wondering how I might export the usernames, passwords, and perhaps group memberships to the destination LDAP. If I can get the data into LDIF form, I'm okay from there. Does anyone know how the passwords in Netware 5.0 are encrypted? I hope to bring them over, but reseting the passwords is not out of the question (just

Hello samba-bugs, I trying to share by samba(2.0.3) allready maped novell directory (maped by ncpmount): ncpmount -S CAPITAL -U butthead -P 12345 /tmp/samba/novell smb.conf: [form618] comment = none writeable = Yes path = /tmp/samba/novell/bank/BANK/618_PO read only = No create mask = 0666

I have attached a diff file with the changes to existing OpenSSH source files to accomodate the NetWare platform. All changes are #ifdef wrapped using one in one of the following defines: HAVE_NETWARE - Building for NetWare USE_EDIR - Using eDirectory(TM) for authentication. NICI - Using Novell International Cryptography Infrastructure (NICI) I have successfully built the OpenSSH-3.5p1