similar to: XP pro profile error _samr_alias ...

Hello, I am reposting this messages, because I did not get any reply, and frankly, I am rather desparate... I also found out some additional info (at the end) I get a HUGE amount of the following errors: In /var/log/samba/log.smbd [2003/04/28 12:11:55, 0] rpc_server/srv_samr_nt.c:_samr_query_aliasmem(2626) _samr_query_aliasmem: Not yet implemented. In /var/log/syslog Apr 28 12:25:14 iuamtg

I noticed this error message within some of my users log files; rpc_server/srv_samr_nt.c:_samr_query_aliasmem(2626) _samr_query_aliasmem: Not yet implemented. Why does this mean and what do I need to do to stop this error message from appearing. BTW, the users all have XP machines. Martin Stacey IT Support Manager Safcol Australia Pty Ltd

Hi all, This is my first try on Samba as a PDC. I have managed to setup Samba as a PDC for my home network. The Win98 pc connects and validates no probs, but not the Win XP pc. The acc on the linux system has been created and is fine as well as the samba passwd's. The XP pc is 'changed' onto the domain with no errors, with the user name that will be used by the user to log on the

Environment: Redhat 7.3 Kernel 2.4.18-4 Samba 2.2.7 NT4 Domain I have replaced the actual domain name and the name of the PDC with words DOMAIN_NAME and PDC_NAME. In both cases, the correct domain name and pdc name are used. I removed, waited, and then re-added my linux server to our domain from the server manager on our PDC. When I then run smbpasswd -j DOMAIN_NAME -r

Hello. I have been having some major troubles lately with samba and winbind. The last 5 posts I made, no one has responded. I did some looking around, and in the last several months it seems that very few people are getting any assistance at all on this list at all. Why is that? I haven't needed this list in years, but it used to be very different. Is there another place a person can

https://bugzilla.mindrot.org/show_bug.cgi?id=2626 Bug ID: 2626 Summary: ssh 172.10 resolves to ssh 172.0.0.10 Product: Portable OpenSSH Version: 7.3p1 Hardware: 68k OS: Mac OS X Status: NEW Severity: normal Priority: P5 Component: Miscellaneous Assignee: unassigned-bugs at

I have postfix configured to deliver mail to dovecot over lmtp into a mailbox that then is accessed over imap. The imap server is running as the user "mail". Whenever I run "postfix flush" I get in mail.log: > Jun 12 05:37:45 li212-205 dovecot: lmtp(21288): Connect from local > Jun 12 05:37:45 li212-205 spamd[18173]: prefork: child states: II > Jun 12 05:37:45

Use Set(CALLERID(num)=9999999999) instead of using CALLERID(all). Remember to set this BEFORE you Dial. -->> -----Original Message----- -->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On Behalf Of Vieri -->> Sent: 06 February 2009 12:36 -->> To: asterisk-users at lists.digium.com -->>

You're quite right. We'll need to see your misdn.conf file to check the settings. -->> -----Original Message----- -->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On Behalf Of Vieri -->> Sent: 06 February 2009 13:49 -->> To: asterisk-users at lists.digium.com -->> Subject:

There is a way to ensure traffic prioritisation...but it can work out a little expensive. 1. Use 3Com 4400 PWR as your switch. 2. Use 3Com NJ200/NJ220 (US) or NJ205/NJ225 (EU) POE Multiport switches 3. Use 3CNJVOIP-CPOD POE --> 7960 POE/Data splitters for power and data connections to the phone. The 4400 Delivers Power to the NJ2xx switches, these switches have 4 ports which can be

Let me start this with the disclaimer that I am a Linux lover that only pretends to have any clue about coding. I grabbed the latest version of OpenSSH (v2.9p1) and went to install it on my Sparc (RH 6.2, v2.4.2). Unlike OpenSSH 2.5.2p2, however, when I tried to compile it I got the following error: ... <compiling away> ... gcc -g -O2 -Wall -I. -I. -I/usr/local/ssl/include

Hi all, I'm looking for recommendations on ethernet switches for a new install. Ideally would want switches with at least 24 ports, ideally with a GE uplink, and that support PoE (power over ethernet) on every port. I've seen lots of switches, and lots of "power hubs", but the combination, which makes a lot of sense, seems rare. What is out there? Do the switches need to be

as u have said in a reply mail below could you please send me the sample config files.. please as i was trying to do LDAP for BDC/PDC for quite sometime and un-successfull also. Your below gives me very good thought trying it agian. I also hope ur sample config files might come great help Thanks in advance with best Regards Yeri samba-request@lists.samba.org wrote: >Send samba mailing

Hi Nithya This is what i have so far, I have peer both cluster nodes together as replica, from node 1A and 1B , now when i tried to add it , i get the error that it is already part of a volume. when i run the cluster volume info , i see that has switch to distributed-replica. Thanks Jose [root at gluster01 ~]# gluster volume status Status of volume: scratch Gluster process

Hi all, While pondering my choices for local dial tone service via a bunch of POTS lines or a T1, I began to wonder if perhaps there is another way. Are there VoIP dialtone providers? That is, could I use only my internet connection for voice calls and not have a separate T1/POTS bank for that? I guess I am imagining a company that gateways between the PTSN and the internet backbone.

We're using rsync 2.6.3 to sync two DELL PowerEdge servers with both Redhat-EL4 and otherwise nearly identical hardware (2.8/3GHz, 1GB RAM each). The source machine has a SCSI-RAID1, the destination a SATA-RAID1 disk attached. There are 5 filesystems which are rsynced via ssh. On the smaller filesystems with ~200.000 files/7GB, rsync takes 1-3 minutes: lion:/atg/ ========= Tue Aug 22

Hi all, To solve my need for dial in modems, I've hit upon an idea: buy a used T1 "analog" modem bank like a Lucent Portmaster that takes in a T1 and provides several 56K modems. This is overkill for a lightly used dial in service, but the prices of these boxes is so cheap (~$300) with ISPs going away from dial in service that it makes sense. This is how I imagine it would work:

Hi Jose, Gluster is working as expected. The Distribute-replicated type just means that there are now 2 replica sets and files will be distributed across them. A volume of type Replicate (1xn where n is the number of bricks in the replica set) indicates there is no distribution (all files on the volume will be present on all the bricks in the volume). A volume of type Distributed-Replicate

Hi, I'm running into more issues when reading data from a gzfile connection. If I read the data sequentially with successive calls to readBin(), the data I get looks ok. But if I call seek() between the successive calls to readBin(), I get corrupted data. Here is a (hopefully) reproducible example. See my sessionInfo() at the end (I'm not on Windows, where, according to the man page,

I've read the docs. I've bought the book. I've searched the lists. For three days and still no joy. Please help. Here are the details: OS: Redhat 9.0 on a Dell Poweredge 2650 Using stable samba 3.0 rpm downloaded straight from the site Configuring by any means necessary: webmin, swat, but right now, smb.conf I have set up a linux account for smbuser, added him to ntadmins group,