similar to: benchmark adn threshold

I've tried to use a Cisco power injector to supply power over Ethernet to a GXP2000 phone without success. Although when I plugged these phone to a PoE capable Cisco Switch it worked without a problem! Knowing that all these three equipments implement IEEE 802.3af protocol, why doesn't it work with the Cisco power injector? Anyone also had this problem before? Thanks, Ricardo Carvalho.

I have a 501 with traditional power and a 301 with PoE. I rightfully assumed that the traditional power from the 501 would work on the 301. How do I get the PoE to work? Do I use the Polycom PoE cable in addition to whatever PoE injection method I use? I have a Cisco PoE injector that works on my Cisco AP350 and my 7960. No combination of this injector, the Polycom cable, and the phone result in

When I bought two Polycom 501 SIP phones, I naively thought they were Power-over-Ethernet (IEEE 802.3af) because they were "powered over ethernet." Silly me. Polycom must have some odd voltage or funny way of injecting the power, because the POE switch I bought for them (Netgear F@510P) won't power them, though if I use the Polycom-supplied AC adapter and ethernet power

Hello, I am trying to set up some Cisco 7940G phones with the 3com POE injectors. I have the 3CNJPSE24 power injector, this is the rackmountable 24 port injector. My question is does anyone know how to serial console into these things? I have tried just about every cable setup I can think of and baud rates but I can't seem to get anything out of it. I want to check to see what certain

I'm looking for 24 or 48 port IEEE802.3af POE injector. Any recommendation? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070720/3886655b/attachment.htm

Am 28.09.2016 um 04:01 schrieb Steve Litt via samba: > Why would ANYBODY type a command when they could perform a bunch of > mouse clicks. Better yet, you can automate Windows tools with a screen > scraper and a keyboard injector, or with a top notch language like > Powershell or Visual Basic *lol* why would ANYBODY click in a GUI when he have a console - and i mean that really

There is a way to ensure traffic prioritisation...but it can work out a little expensive. 1. Use 3Com 4400 PWR as your switch. 2. Use 3Com NJ200/NJ220 (US) or NJ205/NJ225 (EU) POE Multiport switches 3. Use 3CNJVOIP-CPOD POE --> 7960 POE/Data splitters for power and data connections to the phone. The 4400 Delivers Power to the NJ2xx switches, these switches have 4 ports which can be

I'm trying to spec out hardware for a new office, and I'd like to include power over Ethernet as an option. I've seen a handful of PoE injectors around $1000 for 24 ports and a couple switches up around $2500 for 24 ports. Are there any cheaper options, short of buying a boatload of 1-port injectors off of ebay? I don't really need more then 24 ports of PoE out of 48 total

I am looking to replace all of the old "Bell" (POTS) phones in my home and office with IP phones. As you can imagine I don't have a huge budget to work with but I want phones that will provide acceptable voice quality and durability. There are basically three categories as I see it 1. satellite phones (low cost, low function) 2. primary domestic phone (good quality, POE capable,

I know this is on the wiki, I just want to confirm so I don't blow up my cisco phones. I've got several cisco 7940's all running using cisco power cubes. However, my boss wants me to switch just a few over to poe, but doesn't want to fork out the dough for a nice cisco poe switch, or anybody else's poe switch for that matter. So my question is, what is the '99.999%

Ok, and then? in file smb.conf.192.168.0.1 [global] ... bind interfase only = yes interfaces = eth0 ... [FOR_ALL] ... in file smb.conf.192.168.0.2 [global] ... bind interfase only = yes interfaces = eth1 ... [ADMINS] ... Does this configuration works? Is this a good solution? i really don't know, so what's the global thinking about this. -- Information Systems

Dear anybody I am running Fedora Core 6 with the latest version of R. When I try to install the package RMySQL I get this message: * Installing *source* package 'RMySQL' ... creating cache ./config.cache checking how to run the C preprocessor... /lib/cpp checking for compress in -lz... no checking for getopt_long in -lc... no checking for

Does anybody know of aything that will help me do Quantitiative Comparative Analysis (QCA) and/or Fuzzy set analysis?? Or failing that Quine? ta rg Prof R Gott Durham Univesrity UK

I have a couple of questions about the various Icecast builds that exist: 1) It seems like new builds being done today are all "kh" builds. Is that observation correct? If I see something non-kh, is it older by definition? 2) Other than possibly age, what is the conceptual different (if any) between kh and non-kh builds? What do kh builds hope to accomplish that old Icecast never did?

Hi All, 1) I read that the devs are working on supporting AD 2012 in 4.11, very cool. 2) I read SAMBA 4.11 can support 100,000 users and 120,000 computers, very cool. It appears that SAMBA is moving to be a viable file server, authentication and authorization server that can replace Microsoft Active Directory - Directory Services. Is this possible before 2030 for business with multiple sites

Hi all, I've built an LVS architecture for Samba PDC to get load-balancing for very large community of users. It intends to make an authentication processes repartition, offers load-balancing on shares access as well. I'll try to complete a draft for the end of next week. All feedback will be really helpful. Fred

I''ve been scouring the web for suggested Rails defenses against SQL injection, but I haven''t found much on the object creation part. Certainly using attr_protected, etc., is a good way to prevent unwanted fields from being modified on the new object (if you''re passing a hash as creation parameters), but what about escaping the POSTed info before saving? Couldn''t

I receive stdin input from "samba user syncpasswords" in my python script. The user is created with ' Active Directory Users and Computers', and have some accentuated characters in their givenName and/or familyName (sn) When parsing the diff, the CN reads of, but weird characters appears in the attributes instead of the right name : INFO:root:DN found: CN=Arsène

Hi there, I work at an internet radio station. My management thought it might be a good idea to enhance our radio with targeted ads. Do you know of any streaming server that is capable of inserting targeted ads into the stream? So far I have only found Ando Media's Targeted Ad Injector (http://andomedia.com/) which claims to be open source but I can't find the source anywhere. Regards,

Has anyone gotten the Lucent / Orinoco injectors (AE-1, AE-6, AE-12) to work with the Cisco 79* series phones? I'm not sure if the are the statndard POE or not.... -Darren