similar to: what happened to netconfig in 5.1

What is happening in centos 5 with network config files??? I have a machine with 2 network cards. ifcfg-eth1 keeps changing to DHCP. All my static setup is gone. Why is it doing this? How can I stop it? I run "netconfig -d eth1" and re-setup my static information. I reboot and now I am back to DHCP. I have a gigabyte motherboard, nvidia chipset. forcedeth driver. eth0 is e1000.

After installing 4.92 I wanted to run netconfig. It was not availble. I did "yum install netconfig" and got the package. What should I have selected in the "custom packages" at install time to get netconfig? Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

Looks like there are NO command line options on system-config-network. Like -d eth0 or -d eth1 I used those alot when 2 network cards are in a box. Can netconfig be brought back to life? Can I just install the one from 5.0 on new boxes?\ Jerry

Just noticed on a freshly updated CentOS 5.1 system: # cat /etc/redhat-release CentOS release 5 (Final) # rpm -qi centos-release Name : centos-release Relocations: (not relocatable) Version : 5 Vendor: CentOS Release : 1.0.el5.centos.1 Build Date: Thu 22 Nov 2007 06:32:15 PM MST Install Date: Mon 03 Dec 2007 08:10:09 AM

I just rebooted my desktop system to pick up the 5.1 kernel, etc. One oddity I noticed is that the contents of /etc/redhat-release still says: [root at bend etc]# cat /etc/redhat-release CentOS release 5 (Final) but: [root at bend etc]# rpm -q --whatprovides /etc/redhat-release centos-release-5-1.0.el5.centos.1 On my CentOS 4 box, /etc/redhat-release says: [dave at fraud ~]# cat

Is there a method to control module load order? I want to ensure that the e1000 module loads before the forcedeth driver. Jerry

Hi, i was trying to install CentOS 5.1 on new machine based on Intel Q35 desktop board, witch 2 SATA disks (configured as RAID 1) , 8GB RAM and Intel Core2 QUADCORE. The first problem was with install - it hangs before installer startup at ACPI messages. So i installed it with ACPI=off switch. The first problem is : Dec 7 09:54:01 vmhost1 kernel: BIOS bug, no explicit IRQ entries, using default

I am running Asterisk at home on one of my systems here. It uses Centos 4.2. It does NOT have a GUI interface. Command line only at console or via SSH (yeah, I know that I was working on another server to get GUI tools working through SSH, but I am NOT going to muck with AAH build). yum update is potentially dangerous, when it replaces the kernel. You can loose all of your Zaptel driver

Hi All, I'm trying to migrate from Fedora Core 4 to a more stable linux deployment of Centos 4.3. I'm using kickstart to do an automated installation of minimal packages and then doing configuration in the %post section. I do this by calling serveral custom system-config-local-* scripts that I have written along with system-config-network-tui (aka netconfig). The problem that I am

I am trying to install asterisk@home on a Dell 1650 server. The setup cd runs fine and completes with no errors but when I try to connect to the web site (http:myip/maint) to edit the configs nothing happens just a page not found error. I'm not sure if there is a problem with my dual on board nics but when I check ifconfig I see the dhcp address info that was assigned for eth0 and then

Hello all, I've been struggling with an issue with my kickstart configuration for a while now. My kickstart files are stored within the initrd image. What I would like to do here, is when the kickstart first starts up, I want it to grab a DHCP address (it does at the moment) so it can grab all of the necessary installation data off the net. Then, at some point _IN_ the install process, I'd

centos 5 had modprobe.conf entries for eth0 and if present eth1. something like: alias eth0 forcedeth alias eth1 e1000e For the new centos 6 (I have the rhel 6 client installed on my laptop) the modprobe.conf file is gone. Which is fine. I understand files can be created in /etc/modprobe.d and server the same purpose. My question is I dont see (doing a grep) any eth0 alias's in the files in

My machine has a static IP, with dhcp and IPv6 disabled. Every time I reboot, some process rewrites /etc/resolv.conf, including a comment about dhcpclient. The only package I have installed that shows up in "rpm -qa|grep -i dhcp" is dhcpv6-client-1.0.10-16.el5, and nothing in there is named dhcpclient. I'd like to figure out what software is rewriting this file and why. man 5

What are your opinions on pcre vs regexp for header_, body_, and mime_checks in Postfix? I looked at the regexp_table and prce_table man pages, and see almost no difference other than the available flags. Miark

Hi!!! I'm trying to implement a SUS server (local windows update) I-ve already solved my problem to modify registry in order to establish windows update configuration. Now i've a quiestion all my client logon my samba PDC enusing a netconfig.pol isend all configuration everithing works ok. But i've a trouble, my users don't have privileges to install anything and i don't

Network Configurations Block D, Surrey Park, Barham Road, Westville, 3610 Helpdesk: (086) 163-8266 Tel: (031) 266-1563 Fax: (031) 266-4206 Hi list. Has anyone used any commercial or open source application to integrate Asterisk into MS Outlook 2003 which can be used to place calls directly to contacts from Outlook? And if so how well does it work? Thanks, Richard Best Regards Richard

I have started to receive a lot of positive response for the Asterisk@Home project. For those of you unfamiliar with this project the goal of Asterisk@Home is to make a full featured version of Asterisk very easy to install. We have created a 1 step .iso that installs RHEL (RedHat Enterprise Linux) and Asterisk. It includes a web GUI that allows easy editing of the Asterisk Config files.

I have installed Xen version 7033 on an Intel platform with VT enabled, and the Xen boot up without any errors. The network is on in Xen but when I launch the RHEL Guest OS on Xen, IP address failed to be determined. I ran netconfig and restart my network service and yet fail to setup the network. I''m currently wanted to setup the Guest OS on a network so that I can run some benchmark

I have installed Xen version 7033 on an Intel platform with VT enabled, and the Xen boot up without any errors. The network is on in Xen but when I launch the RHEL Guest OS on Xen, IP address failed to be determined. I ran netconfig and restart my network service and yet fail to setup the network. I''m currently wanted to setup the Guest OS on a network so that I can run some benchmark

Hi, Im' trying to put a SUS server on my network, iv'e already installed it, i've a PDC using samba, and my clients get registry configuration to get the updates using a Netconfig.pol file this parts works ok. So I'm having troubles with my clients, they don't get the updates from the server when they are into the samba domain it looks like they don't see the sus server, i