similar to: (no subject)

Hello, I just need a little clarification regarding applying the ext3 patch to the latest kernel. I have 2.4.7-10 that came with RH 7.2. I have ext3 running. I need to upgrade those (to get some USB device working). So I got the latest kernel, 2.4.14, patched it with the ext3-2.4-0.9.15-2414 patch, picked ext3 from 'make xconfig', built the kernel, but the new stuff in /boot, etc.,

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I don't know if this is the right list, but here goes what happened recently to me. I have an IDE disk (hda: QUANTUM FIREBALLP AS20, ATA DISK drive / hda: 39851760 sectors (20404 MB) w/1902KiB Cache, CHS=2480/255/63, UDMA(100)) connected to 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) I've decided to make a

Hi all, I'm testing OCFS2 as a cluster filesystem for a mail system based on maildir, so basically the filesystem must be able to deal with lots of directories, and lots of small files. The first "oddity", is that when I mount a newly formated ocfs2 fs, it already contains used space: [root@ocfs1 /]# df /cgp02 Filesystem 1K-blocks Used Available Use% Mounted on

I've run into a problem with dir.create on R2.2.0 Windows XP 2002 SP 2. setwd("d:/") print(dir.create("d:\\otis-sim\\rdata", recursive=T)) print(dir.create("d:\\otis-sim\\", recursive=T)) Both return false and fail to create the directories. setwd("c:/") print(dir.create("d:\\otis-sim\\rdata", recursive=T)) Returns true and succesfully

Hi everyone, I've been running Redhat 7.2 (new install) for about 2 weeks now without any problems, but today I was not so lucky. My system hung while I was trying to configure the kernel-source RPM using 'xconfig'. After rebooting the system, it seems that my whole ext3 file system is corrupted. I get the message: Mounting root filesystem EXT3-fs: ide0(3,3):couldn't mount

Hello, i have downloaded the kernel 2.4.14 and the correspondig ext3 patch ext3-2.4-0.9.15-2414.gz. After this i extract the archiv at /usr/src, renamed the dir linux to linux-2.4.14 and made a symlink linux-2.4. I changed to the directory linux-2.4 and add the patch as decsribed on the website gunzip < ~/ext3-2.4-0.9.15-2414.gz | patch -p1. There was no error and the patch was successful.

Cd /xen/xen-unstable/linux/2.6.12-xen0/ Then: make ARCH=xen xconfig Thomas Diederich ************************************************** * Boehringer Ingelheim Pharma GmbH & Co.KG * A Informationsverarbeitung / Diplomant Systemtechnik * * Mail: diederit@ing.boehringer-Ingelheim.com * Phone: +49 (0)6132/77-98151 -----Ursprüngliche Nachricht----- Von:

Which version should I use out of the list? Or do I install all of them, one after the other? ext3-2.4-0.9.9-2410p4.gz 05Sep01 (Against 2.4.10-pre4) (Changelog) ext3-2.4-0.9.9-249ac9.gz 05Sep01 (Against 2.4.9-ac9) ext3-2.4-0.9.10-2410.gz 23Sep01 (Against 2.4.10) (Changelog) patch-rml-2.4.10-ac3-ext3-0.9.9-with-dir-speedup-1.gz 01Oct01 (From Robert Love. Unofficial :-))

First of all you must be able to boot. Thus you must press 'e' when your grub screen appear with selection highlights on Red Hat Linux. Highlight line consisting 'initrd...' and press 'd'. Press 'b' to boot. Because your partition does not have a journal on it, create one with these steps below. - Make sure you remember the device attached to ide3(34,7), it is

I just upgraded to kernel 2.4.14 and applied the ext3 patch ext3-2.4-0.9.15-2414.gz. It appears (to me) that the patch breaks the loop block device module (loop.o). The problem is that the call to deactivate_page is unresolved. The routine used to be defined in swap.c. It looks like it no longer exists in 2.4.14. I'm not a kernel programmer so if I'm mistaken, sorry. I do get an

Hi, i'd like to upgrade my kernel to 2.4.14. I've obtained the corresponding kernel patch from http://www.zip.com.au/~akpm/linux/ext3/ however when I run gunzip < ~/ext3-2.4-0.9.15-2414.gz | patch -p1 I am told that this file is not in gzip format. This is based on the file and instructions on ext3 for 2.4 site. Am I missing something? cheers Simon

I try to install the latest nvidia driver. kernel is 2.6.12.6(xen 3.0) and Xorg is used. Everything is ok except monitor. I''m sure that X is running. No error information. Some warning information is here. (II) NVIDIA(0): Setting mode "1600x1200" (WW) NVIDIA(0): WAIT (2, 1, 0x8000, 0x00000000, 0x000005e4, 0) (WW) NVIDIA(0): WAIT (1, 1, 0x8000, 0x00000000, 0x000005e4, 0) (II)

Which version should I use out of the list? Or do I install all of them, one after the other? ext3-2.4-0.9.9-2410p4.gz 05Sep01 (Against 2.4.10-pre4) (Changelog) ext3-2.4-0.9.9-249ac9.gz 05Sep01 (Against 2.4.9-ac9) ext3-2.4-0.9.10-2410.gz 23Sep01 (Against 2.4.10) (Changelog) patch-rml-2.4.10-ac3-ext3-0.9.9-with-dir-speedup-1.gz 01Oct01 (From Robert Love. Unofficial :-))

Hi! It seems that i made some changes that make xconfig to not work .. the problem is that not matter what QTDIR i select i receive the same errors that start with : adrian at sevcenco: linux-2.6.37 $ make O=/home/adrian/kernel/kernel_out xconfig GEN /home/adrian/kernel/kernel_out/Makefile HOSTCXX scripts/kconfig/qconf.o /usr/lib64/qt4/include/Qt3Support/q3toolbar.h:45: error:

Hi I am having trouble compiling some 2.6 kernels on a x86_64 box under CentOS4.1. I cannot use xconfig at all and menuconfig on my system is unreadable. It appears to be something to do with the Qt library but I have all the necessary bits installed: qt-devel-3.3.3-9.3 qt-3.3.3-9.3 but note that the second of these only is installed both for x86 and x86_64 - the first is installed for x86_64

Hello , i want to create a script that should automatically free the proxy partition i.e /var. I am able to create that script. But the problem is that i don't know through which variables i can check my partition's space that show me full detail i.e remaining size, etc. One for that is df -h and other fdisk -l /dev/hdxx. But when i will use if state then which

If I can squeeze a message between the discussions on security (:-)) I have been trying to compile a kernel on an x86_64 box under CentOS4.1 and now 4.2. The problem is that neither make xconfig or make gconfig work: make gconfig * * Unable to find the GTK+ installation. Please make sure that * the GTK+ 2.0 development package is correctly installed... * You need gtk+-2.0, glib-2.0 and

Hello All, I have tried numerous versions of asterisk from asterisk at home to compiling it myself through the cvs server. I don't understand it works fine with the intel p2 box but not the faster via cyrix box. Is it the processor or something? Regards, Otis Surratt Jr. / otis@ocosa.com

Hello All, I seem to be having a problem with PXE under the 3com MBA once the pxe loads the standard redhat 7.2 lilo prompt and I type my label which is a4-72 and hit enter, I get: Loading vmlinuz... and it stops most of the time. Sometimes it loads and once it gets to the part of installing linux the screen turns red and I get "interrupt handler not syncing" Thanks -- Otis DeWitt -

how can I fix this just started ...... Jul 14 14:32:35 NOTICE[4983]: chan_zap.c:6223 ss_thread: Got event 18 (Ring Begin)... == Starting Zap/1-1 at bell,s,1 failed so falling back to exten 's' == Starting Zap/1-1 at bell,s,1 still failed so falling back to context 'default' Jul 14 14:32:35 WARNING[4983]: pbx.c:2377 __ast_pbx_run: Channel 'Zap/1-1' sent into invalid