similar to: Trouble joining a W2K3 Native Mode Domain

Hi All, Any clues as to what is causing this? I have seen similar questions asked before in regards to joining ADS domain but have not been able to find a solution to my problem. The domain is a Native mode ADS on win2k3 with signing required. Please let me know if additional info or logs are required to diagnose the problem. I did a 'net ads join ADSDOM -U

Hi, I am using linux kernle-2.6.15, iptables-1.4 and bridge-utils-1.4. Everything intslled without any issue and i am able to enable the bridge and traffic is also flowing without any issue. But i did not see any traffic on the iptables forward chain due to which i am not able to control the traffic. Do i requie enable anything more to make the traffic pass through iptables forward chain.

I am trying to get a squid box to allow our users through with an ntlm lookup. I thought the hard part would be the squid prox_auth part... but I am a little stuck on the 'member' server part of samba. I have looked at many examples and read a bunch of the docs... but am still stuck. I can: kinit USERNAME@REALM.. and get nothing (good.. right?) I joined the domain (net ads join...)

Hello I am using samba 3.0.10 connected to w2k3 (domain member) via winbind. Everythings works ok, but when linux (winbind) lost connection to w2k3 system works very slow. e. g. Loging to console -> 1min 10sec Apache server -> I cannot refresh web site usage cpu is ok -> about 5% usage mem is ok too, When I restart winbind or kill them everything works good. What is wrong??? I

After I got Windows running it ended up having many processes which were getting killed by data execution prevention. After adjusting boot.ini to contain /NoExecute=AlwaysOff, I stopped having this problem. >From /proc/cpuinfo in dom0: flags : fpu de tsc msr pae cx8 apic mtrr cmov pat clflush acpi mmx fxsr sse sse2 ss ht nx constant_tsc pni ssse3 sse4_1 The NX bit is there, so I

It''d be nice to be able to use the "Emergency Management Services" for Windows 2003 under Xen.. apparently, to use them, however, the BIOS has to support serial redirection. Is there any way to get the BOCHS bios to support serial redirection? I haven''t been able to find anything. Thanks! ------------------------------------------------------------------------ |

hi, does samba 3.0.14 supports terminal server profiles? If not, is it planned? Regards, Alex -- ***************************************************** Alexander F?disch - Central IT Department- Max Planck Institute for Evolutionary Anthropology Deutscher Platz 6 D-04103 Leipzig Germany Email: foedisch@eva.mpg.de Phone: (+49) 0341 3550-168 Fax: (+49) 0341 3550-119

Hi, we are using a samba domain which is distrubuted by UCS (ww.univention.de). A w2k3 Server RC2 is configured as a memerserver. Authentication on its resources controlled by samba via ldap is functional. Right now we have the Problem of getting members to logon to that server using terminal services . I created a group in which all domain users are gathered who should have access. This

Hello, I've been trying to join w2k3 machine to samba 3 domain for a last few hours. This is strange but all I get from joining process is: The Specified User Already Exists. More than 100 machines running XP are already added to the same domain as well as Linux machines. The only problem I've got is 2003 server. This w2k3 server is quite pure however it wasn't me who has installed

With iptables disabled until I can figure out appropriate rules ( http://www.spinics.net/lists/samba/msg104592.html -- what do you do then? ) I added a user using samba-tool user add. If I go to the Windows box and fire up ADUC, the user is not there, even though the AD Replication Status tool reports successful replication. If I right-click the domain in ADUC, and choose Connect to Domain

We have configured a new samba domain that is trusted by a w2k3 domain (but= =20 the samba domain doesn't trust the w2k3 domain) and the users from the samb= a=20 domain are not able to access a share in the windows server. The error they get is: 0x80070534: No Mapping Between Account Names and Security IDs Was Done. This seems to happen only for one particular share, as they were able to=20

Hi??I have some questions about the same questions for [Can't mount samba drive or join domain with W2K3 server] On my computer my samba version is 3.0.4 And kinit administrator at domain can pass. But when I input: Net rpc join ?CS domain name ?CU administrator There is wrong message : Rpc_client/cli_netlogon.c:cli_nt_setup_creds(249) cli_net_setup_creds: request challenge failed

Hello ! I installed Windows 2003 Server (RC2) sucessfully on xen 3.0 unstable changeset 11686. XEN and DOM0 is 64-bit X86_64 based. The hardware I use is a Athlon 64 X2 3800+ (EE) on a simple ASUS M2N-MX Mainboard. However I wasn''t able to run the installation with ACPI enabled in the config file for the domain (acpi=1). The setup procedure simply freezes after loading all the drivers.

Hi, Is that possible? If I start in normal VGA mode I can see yellow ! next to the 2nd and 3rd QXL card and Win complains about can't start (Code 10). If I want to change the normal VGA resolution in a higher res (for example 800x600) I got black screen in virt-manager. I use SPICE protocol (for more screens). Any solution? W2k3 R2 Ent. Ed. SP2 TIA, Ruzsi

I use the video driver for optimal performance. You can download it here: http://www.spice-space.org/download.html Maybe installing this driver on the guest will resolve your issues. Van: libvirt-users-bounces@redhat.com [mailto:libvirt-users-bounces@redhat.com] Namens Ruzsinszky Attila Verzonden: woensdag 12 augustus 2015 11:31 Aan: libvirt-users@redhat.com Onderwerp: [libvirt-users] W2k3 with

Hello. I set up a samba 3.0.0 with ADS support. Everything is fine but authentication of incomming connections. I joined the ADS of a W2k3: linux:/ # /usr/local/samba/bin/net ads join "Computers" Using short domain name -- DOMAIN Joined 'LINUX' to realm 'DOMAIN.LOCAL' linux:/ # getent passwd root:x:0:0:root:/root:/bin/bash ...

Hello all, I am attempting to set up Squid and have the authentication occur onto a Windows 2003 ADS server (enterprise edition- if it matters), hostname W2003. I have followed instructions listed at: http://itmanagers.net/Documents/File/walkthroughs/~Linux@Squid/Squid+and+Samba+3+-+Walkthrough.html and have spent numerous hours(+15) attempting this. However, I can't seem to get past the

Hi, I'm about an article: This is a bug in Win2k3. See knowledgebase KB833708. The KB article itself isn't correct, because it states that if you request des-cbc-crc you'll get des-cbc-md5 tickets, but in reality you get rc4-hmac tickets. The KB article points you to a hotfix or a registry setting. I have the problem with W2003+samba, tried even that patch, but nothing

Dear list, What is the best way to upgrade Samba that is an domain member in a W2k3 ADS environment? The procedure I use right now is like this: - stop the Samba daemons - verify the Samba databases - backup the Samba databases - "net ads leave" to leave the ADS realm - install new version of Samba - "net ads join -Uadministrator" to join the ADS realm - "net ads

I've been in the process of decommissioning a W2k domain controller and moving the whole show to a new machine with W2k3. Everything has moved along quite well except changing the samba setup to use the new system. A little background: Samba 3.0.10 on gentoo KRB5 ver 1.3.1-r1 using winbind/kerberos to integrate the samba server as an AD member server. The Samba server holds departmental