similar to: 'Little' problems with Samba v2.2.3a-12.3 (Debian Woody) and PRINTERS !!)

Hi, I am using Samba (v2.2.3a-12.3 on stable Debian Woody) on a bi-cpu server (named MYSRV) acting as a primary domain controller. All works well except for printers where I have severals little problems. I use LPRng (v3.8.10-1.2 on stable Debian Woody) as my linux lpd spooler on my server. I have 2 printers : one HP LaserJet 4000N (named nss.1er) and one HP LaserJet 4050N (named nss.rdc).

Hi, I have 3 HP network printer with internal jetdirect board. One 4000N, one 4050N and one 4200N. All are share on my PDC Samba server which is under Linux Debian stable Woody (v3.0rX) : Samba v2.2.3a-13. I have a little question that I cant' answer my self : Can it be a problem if all of these printer have [Samba Printer Port] as their 'portname' ? (or 'portname' must be

Hi there, I have a problem with the rpc driver stuff: I have copied the driver files to //atlas/print$/W32X86 and WIN40 (via filesystem copy), added and set the driver without errors. But getdriver reports no driver associatet with the printer?! So reports below. I am sure, this was working on this system. I tried to reinit the ntprinters.tdb, printing.tdb, nt_forms.tdb and ntdrivers.tdb by

Hello, I get the folowing error msg in rpcclient -c 'adddriver' command: ERROR: string overflow by 1 (1024 - 1023) in safe_strcpy [adddriver "Windows NT x86" "My Driver Name 001:aaa] Printer Driver My Driver Name 001 successfully installed. My command is like this: rpcclient MYSRV -s /etc/samba/smb.conf -A auth.txt -c 'adddriver "Windows NT x86" "My

When I ssh-keygen a passwordless key pair for root and give the public key to openssh server(sshsrv), then it is ok to # ssh root@sshsrv But when I generate a password key pair for root and give the public key to openssh server(sshsrv), then I fail to # echo "rootpasswd" | ssh root@sshsrv and get the follow message: Pseudo-terminal will not be allocated because stdin is not a

Hi everybody, I have one SAMBA server (with PDC configuration) which is configure to use an OpenLDAP server (on the same local server) where users and computers account are store (I want to have the two Unix/Linux and Samba account attributes stored to use Name Service Switch and Pluggable Authentication Module). My problem is as follow : If I don't put the following line : ->

G'day all I have a windows 2000 machine with a shared printer. Can any one recomend a good howto to set up samba to use that shared printer. Thanks

Hello all, First, i present myself since this is the first time i post here. My name is Vincent Badier, and i'm a samba beginner. I tried to compil and install samba-3.0.0beta2. I configured it with the --with-acl-support and no error occured. The problem appear when i tried to join an active directory domain. firstly : # /usr/local/samba/bin/net ADS JOIN MEMBER -S mydc -Umyname ADS

Hi, I have a question about printer drivers management in Samba4 (Samba version 4.7.6, Ubuntu 18) I use MMC to add new drivers to an existing cups printers, and some of them are simply refused. I know the samba4/cups server is operationnal as i'm able to add new printers or drivers to it through MMC. I guess it's not a permission problem on the server as i perform the operation as

Hi all, I've just set up a Samba 3.0.0 PDC (LDAP+nss) on FreeBSD 5.1, with CUPS as default print stack, which begins to work nicely. I'm configuring a PDF pseudo printer, with the following share : [pdfwriter] comment = Imprimante PDF : g?n?re un fichier PDF printing = bsd path = /var/tmp printable = Yes print command = /usr/local/bin/printpdf -u

Hi all, I encounter a problem here on a samba PDC with 97 cups printers. When on a windows client, I click right on a printer, then select "properties", it tooks about 12 secondes to open. When from a spreadsheet such as M$ Excel I click on print, then try to select an imprimante from my pdc, it tooks about 30 seconds. I did some debugging, and with an strace on the smb process, found

Hi guys. I've been running icecast for awhile, and just upgraded to the latest version. Everything works fine, nice work. Here's the deal, I'm still not sure how to make a clean link to my broadcast. On the icecast.org site, it calls a cgi-bin file called 'gen-mpegurl.m3u.' This always stars up my broadcast nicely. Is there anyway to get the source code to

I am looking for a package that allow to plot 3D set of points (x, y, z) ? Can someone help me to find it ? thank for help anne -- Anne BADEL-CHAGNON Email:badel at urbb.jussieu.fr Equipe de Bioinformatique Mol?culaire, Universite Paris 7 Tour 53, 1er etage, case 7113 Tel : 01.44.27.77.14 75251 Paris cedex 05 Fax : 01.43.26.38.30 -------------- next part

Hi! I use protocol manager on a boot diskete to map a network drive share which is shared by a samba server. (i.e net use i: \\server\d) I give a username and a password which exists in /etc/samba/smbpasswd (i.e user name: user1 and password: passwd1) but when I create and/or edit a file, it changes the ownership to that file to owner user: dobody and group owner: nobody. Also the rights are

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi, i tried to compile and run Samba 3.0.20pre2 on one of our servers yesterday. The servers OS is FreeBSD-5.4. the configure run was okay, except for the aio part, but thats another point. compiling went fine and installation too. After starting smbd and nmbd i saw all printers but unfortunately all driver association where lost! i found out,

I have got the printing working with CUPS finally on all of my printer. Took a while but they are printing with no errors. What they are not doing is feeding back the print status, and not all of them are consistent. I have a HP2000C that gives me a failed to open retrying error in the W2k printers window. I have a minolta d350 that always comes back blank, even though there are maybe 50 jobs

Hi, I just installed 2 Win2K sp4 workstations on an otherwise working Samba 2.2.8a network and 2 of the 3 printers are showing "Access denied". What's up with that? The other computers that are working just fine are Win98, XP and Win2K NOT sp4. Here is part of the global section: printing = bsd load printers = yes disable spoolss = yes printcap name

I really hate Debian sometimes - no I don't want to start a flame war! In the smbldap-populate script (0.84) some of the template entries are commented out, the first one being the one after "cn=Domain Guests". Obviously the perl version shipped with woody chokes on the commented parts, which causes the script to die. After uncommenting all the templates the script runs

Hi, I installed r-1.7.0 from the source on Debian. For some reasons, connections to X seems to be broken. Simply, graphs do not show up without any warning or error messages. I configured the sources --with-x before I installed it. Any hints? One other thing. I tried to uninstall r-1.7.0 using make uninstall (with r-1.6.2 remaining in the system). When I call R, r-1.7.0 rather than

Dear R users, I'm looking for a function to align multiple waveforms that contain random phase shifts. The "Woody Average" is one such method -- is there any comparable function already coded for R? Matlab code for this type of average exists [http://www.mathworks.com/matlabcentral/fileexchange/loadFile.do?objectId=12459&objectType=FILE] but I don't speak matlab. Cheers,