similar to: errors

In the last month - definitely after going to 5.5 - I've tried to fsck a drive (340 days, or some such, unchecked). 960G RAID 5, I *think*, possibly serial port attachment to a JetStore RAID array. Every time I try, it gets to 70.0%, and stops. As in, I left it run last night, having started it late afternoon, and around 23:00, it was still exactly there, not even .1% more. On that, I also had

I have a Dell ASC-39230(B) U320 SCSI controller. If I use the linux-2.6-xen kernel I am getting an "Invalid Sequencer interrupt" and the system hangs after this. But if I use the linux-2.6-xen0 kernel it works well. Does anyone know why this is happening and how I can make it go away? Thanks, Aravindh Puthiyaparambil Xen Development Team Unisys, Tredyffrin PA ACPI: PCI Interrupt

I have an Adaptec 392320 Ultra320 SCSI adapter. I am running x86_64 SLES9 SP3. When I build x86_64 Xen with just the 2.6-xen kernel + initrd, I am getting the following error on the module load. But if I go back to building separate xenU and xen0 kernels without initrd the device works without any issues. Any idea what is going wrong here? Am I leaving something out of my initrd? Here is the

Hi, I am trying to boot from an external USB hard drive (partition 1: Windows, partition 2: primary/bootable ext3). I took the kernel-image-2.6.8-1-368.deb and created a new initrd with all modules, root=/dev/sda2 and Busybox (mkinitrd failed with my own kernel ;-) isolinux.cfg contains: PROMPT 1 DEFAULT sda2 LABEL sda1 KERNEL vmlinuz APPEND initrd=initrd ramdisk=16432k root=/dev/sda1

Hi, I am getting the following error: dovecot: Jul 23 18:04:44 Error: child 7600 (imap) killed with signal 10 How to reproduce: Try to delete or move a mail to another folder. The mail actually gets copied to the other folder but the original isn't removed (when using webmail). If using thunderbird this ends up in an infinite loop creating new mails in the destination folder (without

We're having a problem with Linux and/or the SCSI controller failing to access an external RAID device. Components are: SuperMicro 6025B-TR+V CentOS 5.0 with yum update as of a week or two ago (kernel 2.6.18-8.1.8.el5) Promise Vtrak M310p Adaptec 29320 LPE -- aic79xx module Sometimes this fails on the initial device probing (before the kernel even begins to boot); sometimes the device is

Hi Fresh 4.2 install on a box that has the following RAID card GDT-HA: Storage RAID Controller Driver. Version: 3.04 ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 27 (level, low) -> IRQ 225 GDT-HA: Found 1 PCI Storage RAID Controllers Configuring GDT-PCI HA at 3/9 IRQ 225 GDT-HA 0: Name: SRCU31L scsi2 : SRCU31L Vendor: Intel Model: Host Drive #00 Rev: Type: Direct-Access

Hi folks, Backing up a host as noted below im getting over and over again the same issue on actual kernel, details: - Backup host has a pci/usb2.0 card, with a 250gb usb 2.0 disk attached, - Celeron 900 family - Remote host, local console from boot linux rescue: # dd if=/dev/hda conv=sync,noerror | ssh -c blowfish root at 192.168.0.6 "dd of=/media/backup/vol-hda.raw.img" - Backup

Hi all, after an uprade to new kernel 2.4.21-15.0.4.EL on my server appears a lot of these messages: EXT3-fs error (device sd(8,17)): ext3_free_blocks: bit already cleared for block 19268224 EXT3-fs error (device sd(8,17)): ext3_free_blocks: bit already cleared for block 19268225 EXT3-fs error (device sd(8,17)): ext3_free_blocks: bit already cleared for block 19268226 I try to rebuild array but

Hi All, Two and three-node clusters with SC3.2 and S10u3 (120011-14). If a node is rebooted when using SCSI3-PGR the node is not able to take the zpool by HAStoragePlus due to reservation conflict. SCSI2-PGRE is okay. Using the same SAN-LUN:s in a metaset (SVM) and HAStoragePlus works okay with PGR and PGRE. (both SMI and EFI-labled disks) If using scshutdown and restart all nodes then it will

I'm having trouble getting my iPod working under Centos 4. I was hoping someone else using their iPod with Centos 4 could shed some light on this. When I attach my iPod via USB, I get these messages: 19:36:44 brahma kernel: usb 1-8: new high speed USB device using address 2 19:36:45 brahma kernel: Initializing USB Mass Storage driver... 19:36:45 brahma kernel: scsi2 : SCSI emulation for USB

Hi! Here is my isolinux.cfg. It's slackware based. ====================== default Kernels/bare.i/bzImage initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=8192 rw root=/dev/ram ZILIX_KERNEL=bare.i prompt 1 timeout 1200 font lat1-16.psfu display mensagem.msg F1 mensagem.msg F2 opcoes.msg F3 help.msg label linux kernel Kernels/bare.i/bzImage append - label adaptec.s kernel

Hi folks, Im trying to get a multi-card reader on centos (SD, MMC, and so, 4 card slots) and i have read (http://www.cs.sfu.ca/~ggbaker/personal/cf-linux) that CONFIG_SCSI_MULTI_LUN should be enabled on kernel (=Y) but current 34.0.2 doesn't have it enabled by default, is there any particular reason to not be enabled? By the other hand i've also tweak the /etc/grub.conf file to boot the

I found a lot of stuff about this on the web, but never an answer that worked. One of the most promising hints was about udev maintaining links in the /dev/disk/by-* directories. This works just fine in CentOS 5, but not CentOS 4. As I was trying to use the iSCSI devices as VMware disks this was particularly frustrating. After banging my head on this for a while, I figured out how to make

> > Well, i''m using here the qla2340 on several boxes. It works > > with Xen 2.0 but noch with Xen 3.0. as part of SUSE Linux 10.0: > > Interesting. If the driver really doews work flawlessly in > Xen 2, then I think the culprit has to be interrupt routeing. > > Under Xen 3, does /proc/interrupts show you''re receiving interrupts? I cannot boot with

> > Well, i''m using here the qla2340 on several boxes. It works > > with Xen 2.0 but noch with Xen 3.0. as part of SUSE Linux 10.0: > > Interesting. If the driver really doews work flawlessly in > Xen 2, then I think the culprit has to be interrupt routeing. > > Under Xen 3, does /proc/interrupts show you''re receiving interrupts? I cannot boot with

I've got an i386 server running centos 4.2 with 3 3ware controllers in it -- an 8006-2 for the system disks and 2 7500-8s. On the 7500s, I'm running an all software RAID50. This morning I came in to find the system hung. Turns out a disk went overnight on one of the 7500s, and rather than a graceful failover I got this: Jan 6 01:03:58 $SERVER kernel: 3w-xxxx: scsi2: Command

I am experimenting with a scsi2 HP SureStore DAT24 attached as an external device to an Intel P4 system. I am attempting to create a raw disk image of a dds2 tape made on a non linux system. My immediate problem is that I am trying to terminate a dd process and having no luck. dd was invoked thus: dd if=/dev/nst1 of=/tmp/disk.dds2.img bs=512 & pid=$! a ps reveals this: ps PID TTY

I'm afraid that I am at a loss here. I am new to Asterisk, and have successfully set up SIP. But I cannot get my FXS card working, and I'm not sure what else I can try. # modprobe wcfxo /lib/modules/2.4.21-37.0.1.ELsmp/misc/wcfxo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may

Hi! Just like to know if anyone have the same problem and the solution for this: At our company we buy that UNKNOWN os called MS XP Pro, after a while the users report some errors when they try to copy to our samba fileserver, before we use Win98 at the client side, and that problem was not observable. The copy start at 50mbit/sec and somehow it's stops and just waiting waiting about 10-20