similar to: can't print over samba

A couple of days ago I set up my printer on my FreeBSD server and set it up so I could print from my FreeBSD client. This all works very well, printing from botht the server and the FBSD client. However, I also have samba set up for file serving with an XP box. I have been trying for quite some time now to set samba up to enable me to print from the XP client. My situation at the moment is that

Hello, I'm having problems using Samba as an primary domain controller. I am using debian woody as our platform. The version of samba is "2.2.3a-12.3 for Debian" and i followed the instructions which can be found on the following url: http://www-106.ibm.com/developerworks/eserver/tutorials/samba/. In short this covers: - creating the config file - creating the users /

Hi, Every time I try to access the mapped drive in Windows to the Unix box, I get username/password prompt. No changes to the smb.config file has been made, we only tried restarting the samba service. What am I doing wrong? Attached is the smb.conf file and log files for nmdb and my pc log file. Smb.conf # Global parameters [global] coding system = client

Hello everyone, I have a curious problem that seemingly came out of nowhere. After searching through the archives, I see that I am not the first to discover this problem, but so far, no solution has been found. In June 99, Mark Drummond mentioned a similar problem. Recently, I started seeing nmbd errors on the console. A little poking around revealed a log file full of these errors. Below is a

Hi List, RHEL 4 Clone, Samba 3.01014 Can it be, which gives it problems with big files ( > 700MB)? >From time to time if copied large files to the server, the network connection to the server will be very slow. ping ServerXX more than 2sec, the server is no longer available. The interesting is, the system has only 0.2 CPU load Starting again Samba alone is not sufficient. Only a server

Hi, I have this problem with samba (2.2.6-pre2 and 2.2.7). When I start the samba machine it runs just ok, but after some hours or a couple of days it makes a error's as follows in log files. And samba stops sharing. When I look whats running I see samba there but it doesn't work. I have security = domain set up log.w2k (PDC) [2003/02/18 23:02:41, 0] lib/util_sock.c:read_data(436)

I've got Samba 3.0 running on a linux machine (red hat 9). the server is configured as PDM with five windows xp clients connected to it. all day long, when there'S activity on the server it runs without problems, but during the night always the same error occures and causes a system crash on the server. here the relevant part of the logfile: Aug 3 04:14:12 dhcppc1 nmbd[1666]:

Hello, I have a new RH 7.2 installation (kernel 2.4.7-10) with Samba 2.2.1a and I can't print from my Win2K box. I get an "Access denied: unable to connect" error from the printer entry in Windows. The logs don't seem to be helping me. Here's my smb.conf file: [global] workgroup = MYGROUP server string = Samba SMB Server interfaces = 192.168.1.1/24 127.0.0.1/24 hosts

Hi! I'm using Samba 2.0.6 on a Redhat 6.0 Pentium box with kernel 2.2.14. In the log.nmb log-file, the following message appears from time to time: [2000/03/01 10:26:27, 0] nmbd/nmbd_packets.c:find_subnet_for_nmb_packet(1406) find_subnet_for_nmb_packet: response record not found for response id 17564 [2000/03/01 10:36:24, 0] nmbd/nmbd_responserecordsdb.c:find_response_record(240)

I'm tinkering with this mod to my smb.conf, and can't get the actual filename to be displayed in the printed job history. It's adapted from one Joel put out on the list last year. My impression is that it works for everyone in the world but me.... All that ever shows up is smbprn.yada.yada... in the printer's history of printed jobs. print command = echo %J %p %s >>

Hi, I'm running samba 2.2.5 on linux, with Win98 clients using it as a logon server. Whenver I try to log onto the TEST domain, I get a very instant "Incorrect Parameter" msg from Windows. Client IP 141.97.52.12 with the samba box being 141.97.52.249. I think my smb.conf looks ok: <--snip--> [global] workgroup = TEST netbios name = TEST server string =

Hi, I'm getting the following errors in /var/log/messages on Mandrake 9.0: Oct 12 07:33:02 laptop nmbd[1736]: [2002/10/12 07:33:02, 0] nmbd/nmbd_responserecordsdb.c:find_response_record(235) Oct 12 07:33:02 laptop nmbd[1736]: find_response_record: response packet id 15760 received with no matching record. Oct 12 07:33:02 laptop nmbd[1736]: [2002/10/12 07:33:02, 0]

I'm getting some strange error messages on my Samba server. Does anybody know what these mean, or where I can look them up? I also don't -think- I'm getting the performance I should be. Any help is much appreciated, Craig Pentium II-300Mhz 128MB RAM Solaris 2.6 Samba 2.0.6 Intel 10/100 NIC Running at 100Mb/Full Duplex Clients are mainly WinNT 4.0-SP4 running ArcView. Feb 27

Hi, I'm having problems getting nmbd running. Server is RH7.3 + ACL patches. The problem is that the nmbd deamon crashes with the following error : [2002/10/09 04:42:43, 0] nmbd/nmbd.c:main(794) Netbios nameserver version 2.2.5 started. Copyright Andrew Tridgell and the Samba Team 1994-2002 [2002/10/09 04:42:47, 0] nmbd/nmbd_responserecordsdb.c:find_response_record(234)

I have recently upgraded my Redhat 7.3 server to Fedora FC1 with all related updates. I also upgraded my samba version from 3.0.0 to 3.0.2a. It now seems that my nmbd daemon will not start & subsequently I cannot log in from any Windows client as the netbios server name PDC is not found I think. Before this problem started, I noticed that in order for my DNS ping requests from Windows clients

Hi, My nmbd daemon is dying with an internal error periodically. Samba version is 2.2.7a (I think the latest stable) but I've tried with the Samba package that came with my Linux distro (a Debian Woody) and it failed with the same messages too. Here goes the log.nmbd file: ----------------------------------------------------------------------------- Netbios nameserver version 2.2.7a

Hello, I just installed samba 2.2.3a on my FreeBSD 4.4 box and am trying to connect to it using my win2ksp2 machine. I've got it set up to be the local master browser in my workgroup for my internal network. However it's not working. I checked the logs and in log.nmbd it's trying to bind to a domain master browser for the browse lists, which i obviously don't have. Is this a new

I have a Solaris box and Windows 2K box connecte through a hub, along with a DSL modem. I cannot get the two boxes to work via Samba, here is the relevant details. The status report from SWAT # Samba config file created using SWAT # from localhost (127.0.0.1) # Date: 2001/03/02 12:54:01 # Global parameters [global] netbios name = MARISOL server string =

> -----Original Message----- > From: Joel Hammer [mailto:Joel@HammersHome.com] > Sent: Wednesday, January 15, 2003 6:57 PM > To: Van Sickler, Jim; samba@lists.samba.org > Subject: Re: [Samba] How do I get the @#$$% job name to show > instead of > smbprn.yada.ya da? > > > If the file name is right in /tmp/J, then it looks like samba > is working ok. > > I

Hello I've installed samba from ports (samba-2.2.6.p2_1) i configured /usr/local/etc/smb.conf [global] netbios name = SERWEREK workgroup = SIATKA security = share hosts allow = 192.168.0. 127. interfaces = rl1 bind interfaces only = Yes server string = Freebsd client code page = 852 dead time = 15 keep alive = 15 [Ogolne] path = /home/samba browseable =