similar to: Problem adding ext3 support to tomsrtbt

tom & peter Hi Guys, I have a little problem I'm hoping you can help me with. When I try to boot toms image, memdisk states a "fractional end sector" while loading the image. It continues with the process until I get a "Booting..." prompt and then freezes. Here's the whole story: A while back I acquired version tomsrtbt 2.0.103, to make a multi-image boot cd as

I've very new to this... what I want to achieve, is to have my clients network boot - and then be presented with a menu, allowing them *well, me* to choose what to do. Maybe, boot from the main hard disk, or boot a disk image from a samba share, or maybe even boot a CD image, instead of having the actual CD in the drive. Also, I would want to be able to change this menu, without actually

hello list i got the following pb: # xm create -f mac1/mac1.xen Using config file "mac1/mac1.xen". Error: Error creating domain: vbd: Segment not found: uname=file:/xen/mac1/swapfs but: # dmesg | grep loop loop: loaded (max 32 devices) # ls -l /xen/mac1/swapfs -rw-r--r-- 1 root root 268435457 2005-04-12 11:25 /xen/mac1/swapfs # xm list Name Id Mem(MB) CPU State

Hi, I've been using Isolinux Boot CD for a while now and it's working great. This weekend, I decided to install it on my hard drive so I can boot Isolinux of the Hard drive. I used the famous command : "syslinux -s c:" to initialize the drive then I copied all the .img file to that drive. Then I renamed the "isolinux.cfg" to "syslinux.cfg" to get to my

Hi! sorry for the top post. I have had some troubles in the past trying to make equipment to boot a floppy with MS-DOS that also used ms networking to access the network. Particularly the Gateway GSX 500 cannot have the onboard NIC with PXE enabled, as it eats about 92k of highmemory, which in turn makes impossible to start Windows XP setup due to low memory. On that particular machine I had

Hi ! I hope, this is the right ML to ask for this kind of problem. I was testing around with ext3 and was deeply impressed that it was working good and very fast. I installed e2fsprogs-1.25 on several machines and make check everytime said: 50 tests ok, 0 tests failed. On my laptop, this looked different, 43 tests ok, 7 failed. Here they come: f_bbfile: bad blocks in files: failed f_dup:

I'm trying to get the total Linux/* installation size as small as possible. I'm wondering if anyone has looked at the installed packages list from the Redhat installation [rpm -qa] and has parsed out all packages not needed for * to run. I follow the custom install guide from Andy Powell but the installation yields 948+ Meg with 340 installed packages. I'm sure most of those packages

Howdy to all, We've been using isolinux quite successfully for quite some time now, and I have come across a couple of laptops where isolinux balks at my config file.. Upon booting on this systems, the image background appears corrupted, and at the boot prompt, the following happens automatically. Unknown keyword in config file. Could not find kernel image: 1 boot: Any label input here

Hello all, I plan to make an (emergency) multi OS bootable CD which contain: - Win98 boot floppy (create from Win 98 control panel, add remove program) - WinME boot floppy (create from Win 98 control panel, add remove program) - Linux boot disk - Win NT boot disk - Win 2000 recovery console - Win XP recovery console - Winternal Administrative Pak (ERD Commander etc) I am new to Linux and feel

I realize this is probably the wrong list but since some of the principals this list deals with are similar in nature I figured it could't hurt. What I am looking to do: Provide a solution to either boot from a floppy disk, establish a network connection, give user the ability to run utilities such as fdisk and dd. as well as provide the same solution as a PXE bootable image. My

Hi, I have a server configured as follows: a standard 2.4.18 kernel, IDE discs, 1Gb RAM (not all used), load avg around 1-2. a large partition, formatted reiserfs within large partition are 80 300Mb loopback file systems, formatted ext3. I got the following assertion yesterday which forced a lot of processes into D state. I'm not sure how easy it is to reproduce this problem.

One of our servers (false) just oopsed. In the middle of lunch. Any advise? On console: false kernel: Assertion failure in journal_start() at transaction.c line 245: "handle->h_transaction->t_journal == journal" In kernel log (ran it through ksymoops): Nov 13 12:35:37 false kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 Nov 13 12:35:37

Hi, I failed to run install.packages("imager") in CentOS 6, the R version is 3.2.2 g++ -shared -L/usr/local/r/3.2.2/lib64/R/lib -L/usr/local/lib64 -o imager.so RcppExports.o colourspace.o display.o drawing.o filtering.o interpolation.o morphology.o transformations.o utils.o wrappers.o -lX11 -lfftw3 -L/usr/local/r/3.2.2/lib64/R/lib -lR /usr/bin/ld: cannot find -lfftw3 I checked

always use the 2.6 variants and fix up for 2.4 under the hood Index: src/journal.c =================================================================== --- src/journal.c (revision 1156) +++ src/journal.c (working copy) @@ -105,9 +105,17 @@ return status; } -#else -#define ocfs_journal_start journal_start -#define ocfs_journal_stop journal_stop + +#define journal_start(journal, nblocks) \ +

Hi, All. I''ve developed the small javascript library to make the widgets "resizable". Please try attached file or following URL URL: http://221.112.61.214/~kzk/others/mixi/resizer.html Now I wish script.aculo.us developers to merge this into the "script.aculo.us". Is there any chance of merge? Is this a right place to ask this question? Thanks in advance. Kazuki

Back story: I started my pool with a 200gb partition at the end of my drive (sdc5) , until I was able to clear out the data at the beginning of my drive. When I was ready, I ran `btrfs dev add /dev/sdc4 /` then `btrfs dev del /dev/sdc5 /`, $ sudo btrfs fi resize max / Resize ''/'' of ''max'' ERROR: unable to resize ''/'' - Invalid argument in

check out the simple captcha plugin for rails... http://expressica.com/2007/02/06/simple-captcha-released-the-captcha-for-rails-applications/ it is really simple to implement, just need one line of code in view and one line of code in controller or model as required. And it provides multiple image styles to be selected from. -- Posted via http://www.ruby-forum.com/.

Hi, I have a working windows lvm of 1.62GB size. I just do an lvextend +1Gb on it, and then the Guest gets stuck at ''booting from harddisk'' the initial stage. Is there something more I should do? I had tried getting it working with parted etc, but it doesn''t seem to work. Is there some documentation on manipulating windows image files and the partitions inside them?

Hi all, and particularly Andrew and Stephen, I recently "upgraded' one of my NFS fileservers from (patched)2.4.18 to 2.4.23-pre7 (in order to resolve a HIMEM related memory pressure problem). Unfortunately I have experienced what appears to be a deadlock. The one I will describe was experienced while running 2.4.23-pre7, though I had a very similar problem in 2.4.22 (but

G'Day All, Can someone help me out please. My new CISCO 7960's manual says I have to setup a TFTP server. Googled it and got a little understanding, but from * standpoint, well I am still a lost. Can I set this tftp server on the same * box? Can in be on a WinXP box? Which tftp software would you recommend? Thanks much. BTY: Does anyone have a How-To on getting the 7960 fully configured