similar to: apparent w2ksp3 problem

Hi, I would like to know if somebody can point me out how to configure several DomUs in a private LAN (for example 192.168.100.0/24) and one DomU with two interfaces (one - 192.168.100.0/24 and two - internet). So far I have enabled in xend-config.sxp: (network-script network-route) (vif-script vif-route) My config files have: /mnt/VM/1.cfg:vif = [''ip=192.168.1.3'']

Anybody have any experience with setting up dhcpd in failover mode between two servers? I set this up on a couple of servers, and it seems to be working, but I don't think it is working "right". It appears both servers are replying to all requests (which for renewals works okay because they both give the same address, but new requests get two different responses). I thought that

jserinki7 jserink # netstat -lnptu Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN 3711/dnsmasq tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2849/cupsd tcp 0 0 192.168.100.1:445

Op 14-10-2024 om 16:31 schreef John R. Graham via samba: > On 10/14/24 10:23, Kees van Vloten via samba wrote: >> >> If you use Bind on the DC with bind-dlz to interface with Samba, you >> can choose where to put the example.com zone. You can put it in AD >> with samba-tool (as you did now) but you can also decide to host it >> in Bind directly (in

An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20110303/0fbefee6/attachment.html

Hi List, I am running into a problem where I have 2 interfaces bridged with and ip address assigned. I have another interface in which traffic has ingress traffic that needs to go out the bridged interface. I am trying unsuccessfully to SNAT the traffic leaving the bridge interface to its assigned address. # brctl show xbrdg0 bridge name bridge id STP enabled interfaces

I am clearly doing something ridiculously wrong. Running Asterisk 0.7.2 on FreeBSD 5.1, I have SIP soft phones which are unable to register. They keep trying and then time out. With the sip debug on in Asterisk nothing is logged. Here is the trace from one of the phones (kphone): (192.168.100.13 is kphone, 192.168.100.3 is Asterisk) sipclient: sending: 21:47:45.454

Hi, Although Im dutch too, Ill write this in english. I got a similar problem then the one on the helpforum. Ill paste my setup first server tincd.conf ---- ListenPort = 8089 MyOwnVPNIP = 192.168.100.1/24 #VpnMask = 255.255.255.0 TapDevice = /dev/tap0 Passphrases=/usr/local/etc/tinc/passphrases server tapdev ---- tap0 Link encap:Ethernet HWaddr FE:FD:C0:A8:6F:01 inet

Hi all, I want to run vsftp behind a firewall.(i.e DMZ zone) . It is runnig as passive ftp. the theroy behind passive ftp is , - FTP server's port 21 from anywhere ( Client initiates connection) - FTP server's port 21 to ports > 1024 (Server responds to client's control port) - FTP server's ports > 1024 from anywhere (Client initiates data connection to

Hi, I have an DNAT ISSUE with PREROUTING. This is my setup. I have 2 firewalls running iptables. Pls asume 1.2.3.4/29 is the internet interace of FIRST firewall. 2.3.4.5/29 is the internet interface of SECOND firewall. it has DMZ zone. in that DMZ zone, mail server runnig @ 192.168.100.3 Now I want to DNAT port 25 of FISRT firewall (i.e - its ip address - 1.2.3.4/29) to the internet ip

Hi, I have an DNAT ISSUE with PREROUTING. This is my setup. I have 2 firewalls running iptables. Pls asume 1.2.3.4/29 is the internet interace of FIRST firewall. 2.3.4.5/29 is the internet interface of SECOND firewall. it has DMZ zone. in that DMZ zone, mail server runnig @ 192.168.100.3 Now I want to DNAT port 25 of FISRT firewall ( i.e - its ip address - 1.2.3.4/29) to the internet ip

I have these interfaces listed. eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.8 netmask 255.255.252.0 broadcast 192.168.3.255 inet6 fe80::e2d5:5eff:fe63:abe5 prefixlen 64 scopeid 0x20<link> ether e0:d5:5e:63:ab:e5 txqueuelen 1000 (Ethernet) RX packets 42411243 bytes 4701898681 (4.3 GiB) RX errors 0 dropped 156

Comments below: On Fri, Dec 23, 2016 at 8:56 PM, Reindl Harald via samba < samba at lists.samba.org> wrote: > first keep your mail on the list and only the list > > it makes me tired when people deliver denugging infos in pieces Me too. :) > - what about "telnet host port" A telnet server is not running. I think that's why you don't see it. > - what

first keep your mail on the list and only the list it makes me tired when people deliver denugging infos in pieces - what about "telnet host port" - what makes you sure that a low level connection even works and no firefwall or whatever device blocks the connection and as long that is not clear any other debugging is useless and i still don't get why in the world don't you

On 10/14/24 10:23, Kees van Vloten via samba wrote: > > If you use Bind on the DC with bind-dlz to interface with Samba, you > can choose where to put the example.com zone. You can put it in AD > with samba-tool (as you did now) but you can also decide to host it in > Bind directly (in /etc/bind/named.conf.local). Bind has all the > options you are looking for. You just have

You might want to check out this script http://www.geocities.com/jame_sj I just noticed a bug (that I need to figure out...) in it but this should give a start.. James Message: 4 From: "Cow" <cow@gline.us> To: <lartc@mailman.ds9a.nl> Date: Mon, 6 Sep 2004 23:56:13 +0200 Subject: [LARTC] HTB problem... Hi folks. Let''s say I would like to make some bandwidth

Rob, Don't know how this one got on samba-docs but I am forwarding it to the main samba list. Thanks. Cheers, jerry Rob Malpass wrote: > > So your Linux box can see your Windows machine but Windows can't see your Linux box ? > > If this is caused by upgrading to 2.0.6 I can't offer much help. Sounds like you've done the obvious things e.g. > > 1)

Am 26.11.19 um 17:37 schrieb Rowland penny via samba: > How about 'getent group Domain\ Users' ? no result = empty reply The "admin" there is able to access stuff and reset his ACLs already. So ... things work so far. thanks. I will consider the config Louis suggested ... but not now (my reply was rejected by some samba-ml-SMTP-server ... another problem)

I'm having trouble sending messages to my Win2000 and XP clients. Everything worked with Samba 2.2.2, and now with Samba 3.0 (CVS) it fails. Below are two trails, the first works (sending to the Samba server) and the second fails. (Also, how do I get rid of the upcase.dat, lowcase.dat, and valid.dat errors?) Thanks!! -Paul penguin# echo "TEST" | smbclient -M penguin incorrect size

Hello, It seems Samba4 is having problems with CNAME records. I am seeing the same behavior as mentioned in the thread below. Is there any ETA on a fix for this? This is identical to the problem with MX records. This is currently a much bigger problem than the MX records. I appreciate any assistance. [root at DC1 var]# dig autodiscover.testdom.com CNAME ; <<>> DiG