similar to: Winbind problem (NT_STATUS_DOMAIN_CONTROLLER_NOT_FOUND)

thank you very much for your help...! i would be so happy if this works !!!! iv joined the domain scienceu : when i join the domain with smbpasswd, i type #./smbpasswd -j scienceu -r 11.1.9.100 -U administrateur and i have joined domain scienceu but if i type #./smbpasswd -j scienceu.org -r 11.1.9.100 -U administrateur i have the same answer here is my smb.conf : [global] workgroup

Hi List. I have successfully used winbindd, with squid to act as a reverse proxy for a webmail product. I initally tested and set up this system in our own LAN. This had the squid box, running winbindd, on the same LAN as our Win2k DC. Everything works fine. Now, once I came to install this system in the real world, I have run into some problems. I have compiled Samba 2.2.7a from source with the

Hello All, I configured samba-winbindd for squid proxy authentication. I was able to add the machine to windows 2000 server.but wbinfo -t returns error Can anybody helps me to solve the problem after seeing the setup and error message Following is the setup i made ]# vi smb.conf # Global parameters [global] workgroup = KOVAITEST netbios name = FIREWALL server string =

Hi I need some help and am hoping you may be able to help me I have tried to install the latest 2.2.4 of samba with winbind and I am not geting anywere. This is what I have done I have installed Red Hat 7.2 cleanly on a system I have used RPM to remove all versions of samba that is installed Downloaded samba 2.2.4 extracted it then ran sh makerpms.sh created the smb.conf file with the following

Hi all. Funny thing happend: I had winbindd working, but now I can't get it back up correctly. I'm not sure what I'm doing differently. Samba version 2.2.5. 'wbinfo -u' says "Error looking up domain users". I joined the domain with the command: 'smbpasswd -j OUR_DOMAIN -r thepdc -U Administrator' and this returned saying "Joined domain

Hi - Comparing some backups with original data, I've found a file which is transferred if --checksum is enabled, but isn't normally. Strangely the mtime of the file appears to be different. I don't know why rsync isn't copying it. I'm doing [root at localsys tmp]# rsync -ravv remote:/root/tmp/ ./ opening connection using: ssh remote rsync --server --sender - vvlogDtpre.iLsf

Help, wbinfo -t fails with the error in subject, and getting sids of groups that aren't BUILTIN fail. Everything else seems to work. Note: I am not converting my kerberos tickets to krb4, is this necessary? (It used to work without it..but now it seems not to work.) I get no errors from kinit. all other wbinfo requests succeed with the exception of looking up the SIDS of groups that

How do you do !!! Compile samba-2.2.7a with -with-winbind -with-acl-support, has adjusted smb.conf [global] netbios name = server workgroup = sgtp server string = Samba Server max log size = 50 security = domain wins support = yes password server = DOM MULT * encrypt passwords = yes log level = 3 log file =

Hello! I set debug level 10 to samba 2.2.0 and now see in log: [2001/05/10 08:31:48, 10] smbd/uid.c:gid_to_sid(409) gid_to_sid: winbind lookup for gid 5284 failed - trying local. How can I say to samba to not try use winbind? -- Wire connection and Windows reinstallation senior engineer Dmitry Melekhov http://www.belkam.com/~dm 2:5050/11.23@fidonet

Hello, This was tryed with samba 2.2.5 on Trustix 1.5 (kernel 2.2.20) i tryed to use winbind on Windows 2000 Network with subdomains. in One Subdomain (da-ag), the DC has no SP3 installed. wbinfo shows me user information and groupinformation. getent works also. On the second Domain (gt) runs DC with SP3 installed and here, the Winbind don't work as expected. I run winbindd in Interactive

Hello list, i want to auth. squid against a win2000 AD group to get internetaccess using winbind. First i had installed samba.2.2.5 I configured smb.conf: [global] workgroup = CAMPUS server string = Samba Server hosts allow = 149.250. 212.68. 192.168. 127. security = domain password server = ATHENA encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192

I had posted about winbind picking the wrong domain to this list about a week ago and this was the problem I was still trying to solve when I must have messed something else up. SO! Winbind WAS working (even though it was picking the wrong domain) I re-ran smbpasswd -j LMC -r <our PDC> -U administrator I get prompted for the password, enter it and I am told that I joined the LMC

Hello list, I'm runnung samba 2.2.4 on solaris 2.6 using winbind for account management. The samba server is a member server in a w2k domain. I've tested winbind in two different w2k domain (test and productive) with the same settings and analogue entries in the smb.conf. In the one w2k domain all run properly, in the other one I can join the domain (wbinfo -t tells secret is good), but

Hello! I am currently working on a big data set. There are different subjects that have been measured in about 40 different variables (in this case a measure of brain metabolism). Now I want to look at possbile significant correlations between those variables. As some of the variables are not normally distributed I used "spearman" as method in the function rcor.test from the

Hi all, I recently applied service pack 3 on all my domain controllers and disabled anonymous enumeration. This broke winbind. After reading some of the listings and looking at the log info from winbind I believed that winbind gets its user list by doing an anonymous request so I changed it back but I still doesn't work. I get a failure with every wbinfo command. Here is an excerpt from

hi scott! well here is my smb.conf ... : (now linux is my wins server) # Samba config file created using SWAT # from 0.0.0.0 (0.0.0.0) # Date: 2003/05/06 15:57:41 # Global parameters [global] workgroup = SCIENCEU netbios name = TT security = DOMAIN encrypt passwords = Yes password server = srv-win-2000 ; wins server = 11.1.9.100 wins support = yes winbind uid = 10000-20000 winbind

Hello. I'm trying to join a W2K domain. The DC runs in mixed mode. 1. In Active Directory I added the machine "DELL1-W2K" with option "NT 4.0 / 3.51 machine can use that account". For NT 4 machines the domain is WIN2KTESTSERVER. For W2K machines or higher the domain is "INTERN.DE". 2. On LINUX I joined the domain "INTERN.DE" with # smbpasswd -D 10 -j

You may want to add the lines: wins support = No wins server = xxx.xxx.xxx.xxx Brett -----Original Message----- From: Oliver Thinnes [mailto:O.Thinnes@pulsaar.de] Sent: Wednesday, June 05, 2002 9:15 AM To: 'samba@lists.samba.org' Subject: [Samba] Joining a W2k domain - Could not look up dc's for domain Hello. I'm trying to join a W2K domain. The DC runs in mixed mode. 1. In

So I solved my orginal problem, but now here's where I'm at: No errors when smb or winbind start (based on log files) If I do a wbinfo -t I get that the secret is good. If I do a wbinfo -u 0xc0000233 Is all I get??!? Same for when I do a wbinfo -g What does this mean? No Domain Controller? If that's the case I've tried changing the password server line in my

Environment: Redhat 7.3 Kernel 2.4.18-4 Samba 2.2.7 NT4 Domain I have replaced the actual domain name and the name of the PDC with words DOMAIN_NAME and PDC_NAME. In both cases, the correct domain name and pdc name are used. I removed, waited, and then re-added my linux server to our domain from the server manager on our PDC. When I then run smbpasswd -j DOMAIN_NAME -r