similar to: Newbie SAMBA Printing question

I cannot print across my subnets using microsoft win9networking. I have two subnets 192.168.0 & 192.168.1 of which the linux running samba server is the router using two ethernet cards . Workstations on both subnets share their printers from win95. Win95 machines from both sides of the subnet can telnet to both ethernet cards on the server and can also ping all machines across the two

I'm trying to setup a print share with samba-2.2.4 that 9x and 2k clients should be able to print to. Below is my current setup listing only printer related options. My first concern right now is that I have cups running with the pdfdistiller script to format print jobs into pdf documents. I'm not using a real printer for this. I need samba to display the cups printer called PDF_Printer so

Hi I'm trying to setup a new streaming server for us. We are a radio station which we stream live and have archive files (mp3). We currently are using icecast-1.3.12 on solaris9 and darkice-0.13.1 also on solaris9. I have setup two new servers using icecast-2.2.0 on solaris9 and ices-2.0.1 on solaris9. I'm not sure if I have setup the conf files correct (see attached files) but I am

Hi, I have a samba 2.2.2 on HP-UX 11, serving a few printers. When I install a new driver via win2000' printer properties dialogue it works fine. When I try to do the same from unix with the imprints package, ist screwed. The driver files get uploaded, but they don't register as an installed driver, with rpcclient 'enumdrivers' I don't 'see' them. When I set the

Hello, A client of mine has this ancient software called VideoPrinter (working on Win98) and an ancient hardware that connects to the PC through both LAN cable and serial (COM) cable. I decided to give this software a try with wine 0.9.60 running on Slackware 12, kernel 2.6.23.4. The software installs without problems and after adding the appropriate registry keys the COM is recognized. But the

HI all ! I've read in a doc, that Samba is talking only with the clients where Netbios over TCP/IP is running ! I guess it is true, but are there any solution maybe to connect with a client where only the NETBEUI is the only one installed protocol ? It would be from DOS, I have a DOS boot disk which is waking up the Netbeui, and it would be difficult to prepare it to wake up the TCP/IP !

I am running Samba 2.2.8a on solaris 5.7 machines. I have had 2 subnet working just fine for years. I'm trying to add a 3rd subnet. I am having a problem with my XP machines on a third subnet. I have changed the registry so: requiresignorseal = 0 and requiresecurechannel = 0 and rebooted. and Enable NetBIOS over TCPIP is set. I have two XP machines one with NETBEUI install and one without

Hello all, There is still a use for netbeui (non-routed protocol) in the network. If you are using a VPN client that does not allow split tunneling, you can still access printers on another local system with netbeui. I would like to remove the windows system and have my print shares on my Linux system with Samba. Is all consideration of netbeui within the Linux/Samba environment gone?

Hello all! Samba works fine. GREATE WORK OF SAMBA TEAM!!! But when i try to upload more than one driver for printers samba writes to log: [2001/03/30 13:30:18, 0] printing/nt_printing.c:move_driver_to_download_area(1178) move_driver_to_download_area: Unable to rename [WIN40/hpblgbe.drv] to [WIN40/0/hpblgbe.drv] and then if i try to download driver to workstation, samba says that driver is not

I've studied the books, searched the list archives, etc. I suspect there is someone who can just tell me one thing to tweek, so I humbly beg your advice. Situation: I am playing with/learning Linux, intending to replace our two company Netware servers sometime in the next 6 months. At home, I have an NT4.0/SPC PDC, an NT4.0/SP6 docked laptop, and an HP server with RH7.1 or 7.2 (2.4.??

Hello: Is it possible to run SAMBA over IPX/NetBeui? (I will thank any suggestion) I hava an small LAN of 3 computers, connected to the Internet through a Cable-modem with DHCP (the cablemodem and the computers are all connected to a hub). The CableModem assigns every computer a random public IP adress, but usually from diferent range (ie: 212.78.x.x, 62.57.x.x, etc), so I cannot get SAMBA or

Thanks to those who wrote and suggested I remove NetBEUI from my Win95 machines. Here's the next chapter in the story: First, based on another suggestion, I tried "netstat -a" on the Win95 machine "secretary". It didn't show any kind of traffic on ports 137-139 (even though files WERE being shared at the time). Next, I tried removing NetBEUI from

Hi, is it possible to print to a intel netport express? i am on a linux machine, every other machine on the network is a win95 or nt machine and i cant figure out why it wont let me print to the netport. when i do smbclient '\\Np1\np1_lpt1' -P it just times out and gives this error. smb-print.log -------------------------------------------------------------------- server NP1, service

I have found a nasty bug when a file, which is in some of many sources, shall be copied to a target. The linux-Version works well but rsync 2.5.{2|5|6} under solaris9 (gcc 2.95.3) and darwin (gcc 3.1) do not. The decision which file (out of which src) shall be copied depends on the number of src dirs given on the command line. This bug bytes us very hard, because we decided to rely on rsync

Samba is working perfect on our main subnet, but it won't for any additional subnets on this domain. We use NT authentication and my system is an RS/6000. I just found out that our routers for these additional subnets have netbeui/netbios turned off. Network Admin. said it's because they're set not to allow broadcasting (and they're not going to start), and turning

Hello - I've been working on getting ready to cut our 60+ Samba servers over from the old style printers.def approach to the new printer drivers databases. However, I'm have a hard time uploading the packages onto the server using the install_printer_drivers.pl script from Imprints 0.0.9b. To make sure I wasn't packaging them wrong I used the imprints.sourceforge.org server to get

Hello, Adding to my previous msg, debug level 7 finally gave me some output. In my smbd.log i am seeing the following whenever i try to upload printer drivers: getpeername failed. error was transport endpoint is not connected I've looked in to other methods of doing this, imprints doesn't seem to be supported, cupsaddsmb won't work with vendor supplied drivers, and to date i

I finally got my drivers to upload to the print$ share by using the add_print_package.pl script form imprints, and I was able to attach the driver to the printer created with SWAT (the rpc command: addprinter does not work) by using the rpc command: setdriver. So at this point whenever I connect a client to the machine it no longer asks about trying to find a driver. However when I go to open the

I think this has been addressed a few times, but without quite satisfactory results. I have a private subnet behind an NAT proxy server (IPMASQ), and a public subnet on the other side with the NT PDC on the public. (Using both NetBEUI & TCP/IP). The PDC will change later, but currently I'm trying to find out how this all works before I do that. I'm trying to make a client machine on

I began playing around with 2.2.0a2 yesterday. The text docs have instructions for setting up the "print$" share and installing drivers for client download. This involves browsing to the samba share from a W2K or NT server, accessing the "printers" folder, and right clicking on each printer to install drivers. I've managed to get W2K/NT and Win98/95 drivers