similar to: commercial wireless access for linux

> > > > I would be grateful if anybody could tell me what I should > > tell Verizon > > in NJ so they would enable "disconnect supervision" for my lines. > > > > Apparently "remote hangup notification" or "disconnect > supervision" or > > "calling party control" is NOT the magic phrase for them. Although >

Hi, I have an odd problem where when a call is made to any landline phone the callerid number shows up on the caller id device with no problems. However when I call a cell phone from Sprint or Verizon it always shows up as unavaliable. I've tried multiple cell phones from each carrier. Though today I called a t-mobile phone and the callerid came through fine. Is this an * level problem

http://gizmodo.com/gadgets/cellphones/sprintsamsung-instant-cell+to+wi+fi-box-is-official-named-airave-300451.php The above is quite interesting, it would be interesting to see if it uses sip, which I have no reason to believe otherwise, and if it does, can it be hacked to talk to Asteirsk? In which case one could have a very good extension to asterisk using any Sprint Cell phone, or maybe even

Does anyone have any experience (good or bad) with using EVDO high speed wireless broadband service under CentOS? I am looking for high speed / low cost internet connectivity for an office that is in an area without DSL or Cable. My idea was to use EVDO from either Verizon or Sprint with a PCMCIA to PCI adapter card that I could stick into a CentOS machine that is used as the router/firewall.

Thank you all for the voicemail cards you sent. If you have the following in PDF or laying around (scan): * AT&T/Cingular flow voicemail card * Verizon flow voicemail card * Sprint flow voicemail card * TMobile flow voicemail card * Alltel flow voicemail card * Avaya Nortel Octel flow voicemail card * Comedian Mail (Asterisk) -- I have the flow, need a card if someone has one I will work on

Hi, I'm having a problem with Verizon Wireless, I'm hoping someone here knows the right way to phrase the trouble report so it gets to someone at Verizon who can solve the problem. We have DIDs that simultaneously ring on voip lines, and Cell numbers. Verizon voicemail is turned off. Every thing works the way it's supposed to, UNLESS one of the cellphones is turned off, or in a

Are you looking for local or Long distance? What will these T1s primarily be used for(inbound/outbound, domestic, local, long distance, international) How important are per minute rates to you? how many minutes do you expect to use per month? We are in Tampa Florida and have 15 T1s from several different providers so I may be able to refer you to one if it's a match to what you're

Timo, Its interesting, I am presently attending a conference in NYC and in one of the tables I saw the redhat vendor. My first question to them was " What do you think about centos", they reply "You are using a distribution without support and that is prompt to failure..." I don't think this is an accurate statement is it? Anyway to make the story short, they keep telling

Hi All, I've got a brand new dovecot installation. I'm new to dovecot, so please be gentle :-) Anyway, I'm getting some errors when I try to connect to dovecot. I've tried searching the web and haven't been able to find a lot of information. Here's the config info: # dovecot --version 1.1.2 # dovecot -n sudo dovecot -n # 1.1.2: /usr/local/etc/dovecot.conf base_dir:

All, Having trouble getting answer from Verizon. I believe Asterisk will let me specify a name and number that is sent to the PSTN (Verizon) of outgoing calls. For instance, if I have a client, First Bank, and their toll free number is 888-555-1234, I could send that name and number. Verizon is telling me that they will forward the number I send them, but the name will be my company's

The docs to installing cfengine refers to /var/spool/cron/crontabs/root That doesn't exist. Nor does /etc/crontab. Heck I remember that from the "old days", now there are lots of cron entries, in /etc but no crontab. Not installed by default. So, I'm hunting that one down. Nate, what did you wind up doing?? Ric -- ---------------------------------------------------- My father,

Program your locked ADSI phone not by unlocking it but by using the feature slot FDN download descriptors of ADSI SEC security code telco provider lock number key from database list. ch33s3 First reset phone. Set clock to Jan 1 12:00AM (options-2?). exit to main screen. press options, (mute/flash/speaker/?) until you see firmware version. press # to reset. google more info, bam ch33s3d ;

Hi all, Somebody can points me where I can found a list with supported pci wireless cards under centos 3.x ?? These pci wireless cards need to support a/b/g and n protocols... Many thanks. -- CL Martinez carlopmart {at} gmail {d0t} com

Hi, I have a laptop DELL M90 with an Intel PRO/Wireless 3945ABG card. After installed new rpm drivers (see below), my card is recognized and I can see my wireless acces point with (iwlist - iwconfig) but it's impossible to connect to it. It seem that I can't obtain an IP address. In the log message I have "dhclient : DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval ) The

Hi. I had to update the BIOS of a Silicon Image 3512A Serial ATA controller. I''m not using RAID. When I run the updater program (updflash.exe), it asks me to choose flash memory from a list, something like: AMD Am29F010B (1 Megabit), AMD Am29LV01B (1 Megabit), etc. How can I find out which is flash memory of the controller? Thanks Marcelo

I have an Infortrend RAID box I'd like to see as one big 6TB partition, but I only can get 2.2TB partitions to work. I was trying to do this with an Adaptec controller but apparently they are only (any of them) 48 bits wide. Does anybody have a working system for SCSI/Centos over 2.2TB? Milt Mallory Topix.com 650-461-8316 Always consider the issues of progressive enhancement and

I haven't dealt with Centrex for a long time, and one of my customers is being courted heavily by a Sprint salesperson. Am I not correct in assuming that each "line" of Centrex corresponds to an "extension" in the PBX world? This site has 2 POTS lines and 5 extensions, and they told me that for the same thing they're paying right now (~$40/POTS line) they will be

I''m using shorewall with openvpn and traffic shaping at all of our offices. I have noticed for a while that occasionally ping times are excessive. Usually this is during overnight off site backups but some times during the day. I have assumed the is was an ISP issue but now I''m suspecting it''s problem with openvpn and traffic shaping. In the test case have 2 sites

There used to be a CUI tool to configure printers from a server without X running. Is there still that tool but renamed to something else? Or do you have to use VNC and X to remotely configure printers starting with 5.x?

We're got a T1 from Sprint that we use for internet. During VIOP calls, if you download something, the VOIP calls break up. I found some info at Sprint for adding 'class of service', and I also have some information on configuring our Cisco routers. I've read the relevent pages on the wiki, but it seems vauge what's required and what's required by the NSP (Sprint).