similar to: One domain w/ multiple subnets. Do a "join" for each subnet?

We've added the server name to our PDC (as a Windows NT Workstation or Server) and when we attempt to "join" we get the following error msg: hbsrv{root}#smbpasswd -j DDRJ -r PDC-DDRJ cli_net_auth2: Error NT_STATUS_NO_TRUST_SAM_ACCOUNT cli_nt_setup_creds: auth2 challenge failed modify_trust_password: unable to setup the PDC credentials to machine PDC-DDRJ. Error was :

Samba is working perfect on our main subnet, but it won't for any additional subnets on this domain. We use NT authentication and my system is an RS/6000. I just found out that our routers for these additional subnets have netbeui/netbios turned off. Network Admin. said it's because they're set not to allow broadcasting (and they're not going to start), and turning

I've got Samba 2.2.2 installed and running fine on one of our servers (RS/6000 AIX 4.3.3 and using NT authentication), however, when I do Test #4 (from docs/textdocs/DIAGNOSIS.txt) it looks like this: npssrv{root}#nmblookup -B npssrv _SAMBA_ querying _SAMBA_ on 173.148.200.113 name_query failed to find name _SAMBA_ The test said I should get back the IP address of our samba server. I got

We're using Samba 2.2.2 on AIX (RS/6000) with NT authentication. We only want to authenticate at the PDC, and if they pass, they'll be able to map to whatever shares have been assigned to their Workgroup...we need to bypass any authentication at the AIX level. From the limited documentation (PAM-authenication-and-Samba.html) , it almost looks like PAM will accomplish this task. Is

We're running Samba 2.2.2 over an NT network. Our clients use Win95 (for the time being) and I wondered how we config Samba so they can map the shares using network neighborhood. We can map fine through MS-DOS, but when I try, for example, to map E drive to \\nfssrv\ads share via network neighborhood (where we ARE able to see the shares), it says E: is already connected to . Do you want

I've been reading chapter 3 of the SAMBA Project Documentation and I can't find any PAM files (pam.d directory) in my /etc. Is there something I need to compile in order to have these files? Thanks for any help. Darin DeCounter Atex Assistant System Administrator Las Vegas Review-Journal 702-387-5230 ddecounter@reviewjournal.com

Can anyone help me? I have Samba 2.0.5a running on SuSE Linux 6.0 (2.0.36) and Windows NT Server 4.0 SP4 (PDC). When I try to do a "smbclient -L MYUNIX" (according to the trouble shooting guide) I get the following message: Addes interface ip=195.90.254.xxx bcast=195.90.254.255 nmask=255.255.255.0 Password: Domain=[MYDOMAIN] OS=[Unix] Server=[Samba 2.0.5a] tree connect failed: ERRSRV

Hi, I just downloaded the latest version of Samba in the form of samba-latest.tar.gz Managed to unzip it with gunzip but cannot figure out how to install it. Tried rpm but didn't work. I have an earlier version of Samba (2.0.6) on my SuSE 6.4 machine already. Can I just install the new version or do I need to do some sort of uninstall of the previous version first. advTHANKSance, Mariann

We're running Samba 2.2.2 on an RS/6000 (AIX 4.3.3) using Windows 95 clients. We've tried the "hide files" and "veto files" option in smb.conf, but when the shares are mapped, we can still see the contents in Windows Explorer. We used the wildcard for all the contents of the shares (ex. hide files = /*.*/). The Samba manual only makes reference to Windows 98, so

As soon as I start up the daemons using the following commands, nmbd dies. /usr/local/samba/bin/smbd -D /usr/local/samba/bin/nmbd -D When I view the nmbd.log it gives the following. We're trying to set up Samba to work over 2 subnets. Smbd is ok and we can still mount our shares. Does anyone have any suggestions? Thanks for any help. [2002/10/22 10:37:55, 0]

Is anyone of aware of any known problems with Samba 2.2.2 and Windows 95, dealing with hiding shares and/or their content from Windows Explorer? We need to map these shares so our application can function properly...but the shares and/or their content should never be accessible via Windows Explorer. We have browseable = no for the shares. We also tried the "hide"option, but the

Hello, Thanks for all the help so far. I've got nmbd and smbd so they're running now, not being blocked out by my firewall however nmbd is still unable to sync browse lists with my domain master browser, which i don't have as i'm in a workgroup and i'd like samba to be the master browser. I have enabled wins support see smb.conf below. Any suggestions appreciated. Thanks.

Hello, I found Pasi's site (http://centos.upi.iki.fi/pub/centos/4/os/ppc/) describing how to get CentOS working on a IBM 7043-150 43p CHRP 604e RS/6000 box. I have the exact same machine. I followed his instructions and got the version of CentOS he provided working on my system. [root at murray ~]# uname -a Linux murray 2.6.9-5.0.3.102.EC #1 Sun Mar 6 18:32:26 EET 2005 ppc ppc ppc

Hi, I''m a big fan of Puppet and managed to have my company accept it. However, I''m having issues deploying it (I''m used to the debian version which works perfectly out of the box) : - There doesn''t seem to be an official repository for Suse (I''ve seen it mentionned in the bugtracker but yum.puppetlabs.com doesn''t contain SUSE packages). -

hello r development team, i'm building R 2.3.0 on solaris and when i run the 'make install' i'm getting a syntax error during the "installing etc ..." which causes the installation to fail. i get this error whether i use gnu-make of sun-make, see the error and reasons below. gmake[1]: Entering directory `/export/medusa/darin/build/R-2.3.0/etc' installing etc ...

Hello All, I'm deploying NUT in a data center and I'm curious to know how others have gone about staging the shutdown of various systems. The systems are broken down into groups of importance, group1 being the most important group4 being the least. In the event of an outage take down group4 after 5 minutes, group3 after 10 minutes, group2 after 15, and finally group4 after 20. I've

Good afternoon, This is my first post, so please be gentle ;) Anyway, here's my question....I've recently put together a Linux Server for our company, replacing an old Novel server. I have the box set up with Samba, as a PDC on our network. So far, just about everything is working correctly. One issue I'm coming up against, though, is printing from DOS. I have Samba

Client - secureCRT 3.3 outside the firewall (Checkpoint) Server - openssh v3.7 on an aix51 rs6k inside the fw The firewall lets in the first packet but blocks the second with the message: ssh 1.x not allowed. The connection gets reset. Here is the trace from the client: [SSH LOCAL ONLY] : Connect: 12.x.x.x:22 [direct] [SSH LOCAL ONLY] : StateChange:

Does anyone know a reason why, in principle, a call to randomForest cannot accept a data frame with missing predictor values? If each individual tree is built using CART, then it seems like this should be possible. (I understand that one may impute missing values using rfImpute or some other method, but I would like to avoid doing that.) If this functionality were available, then when the trees

Good morning Does R (or R users) have a formal training workshop/facility? Or do open-source softwares generally put the onus on the user to learn programming techniques? Are the workshops generally offered for the masses or is there one-on-one training available? Does one "go to" R for programming training ... or do R workshops travel around the country? Thanks for your