similar to: Simple Samba Guide (Here it is)

The Xen module is unnecessary and it has been for a while. Most Xen systems will not be using the module, even now, because xen-detect is not installed by default on most Xen systems, and dracut uses xen-detect to decide whether to include the module. It also has some problems: 1) it does not try loading xen_platform_pci; 2) it loads modules unnecessarily; modules.alias is where all Xen

Hi, I have tried to enable IPSec support for my FreeBSD( 4.11-RELEASE) system. First, I copied the generic kernel configuration file to a file I called MYKERNEL: #cp /usr/src/sys/i386/conf/GENERIC /usr/src/sys/i386/conf/MYKERNEL Then, I added the following three lines to the options section of /usr/src/sys/i386/conf/MYKERNEL: options IPSEC options IPSEC_ESP options

Hello Everyone, Has anyone tried to install BackupPC v4 on CentOS 8 from epel? I just did and this happened: [root at resurrect ~]# dnf --enablerepo epel install BackupPC Last metadata expiration check: 0:18:41 ago on Tue 15 Oct 2019 08:03:59 PM EDT. Error: Problem: conflicting requests - nothing provides par2cmdline needed by BackupPC-4.3.1-2.el8.x86_64 - nothing provides

Recompiling kernel Hi I am using CentOS 4 and trying to recompile kernel for my AMD Thunderbird 1.4 CPU. I used a manual for fedora 3,but I can not make it. After doing #installkernel 2.6-new arch/i386/boot/bzlmage System.map My comuter says "arch/i386/boot/bzlmage no such a file or directory" Could you possibly help me where the appropriate directory is please? Thank you for

Hi, I'm running 4.8-STABLE but I'm having some problems installing a new kernel. (in /usr/src make installkernel). mv /kernel /kernel.old operation not permitted My securelevel is currently set to -1 (kern_securelevel=-1) and kern_securelevel_enable="NO" I have already executed chflags noschg /kernel and /kernel.old (while in single user mode). What am I missing? Thanks.

I sent this to freebsd-questions earlier via the newsgroup, but I just found out today that the list-to-news gateway has been down for half a month now. Any idea when it's going back up? Who was hosting that service anyway? And now for the question.. I have a test server that is being used to test a 4.4-REL to 4.8-STABLE upgrade, and I've found the system will no longer boot unless I

Hello, I installed 4.8-RELEASE a few weeks ago, and since I let the effort sit stagnant for a while I decided to do the cvsup/buildworld/buildkernel/installkernel/installworld/mergemaster/MAKEDEV steps to get current. Went fine, rebooted, then noticed that just one CPU was recognized: FreeBSD 4.8-STABLE #0: Thu Jun 19 17:05:20 PDT 2003

Back before the 7.0 Release I used to install cross builds by NFS-mounting /usr/src and /usr/obj of the build machine on the target machine and running: # cd /usr/src # env MAKEOBJDIRPREFIX=/usr/obj/<stuff> make installkernel KERNCONF=<kernconf> ... This doesn't work any more because all the installation tools are built for the architecture of the build system. The alternative

Thanks Anders, I'll take this as verification that it can be done and struggle on. Does it require registry tweaks? > -----Original Message----- > From: Anders Widman [SMTP:andewid@tnonline.net] > Sent: Thursday, February 21, 2002 11:05 AM > To: samba-admin@lists.samba.org; Harvey, Sean > Cc: 'samba@lists.samba.org' > Subject: Re: [Samba] Unable to access Samba

Greetings, After I updated my FreeBSD box from 4.7 to 4.8 I "lost" my users, but heck with users, what I mean by lost is that I can't login, when I try to login as the root or a regular user it says: pam_authanticate: permission denied so, I went ahead and re-updated my box from the very beginning, including unnecessary at this point cvsup. I used this command: make buildworld

Hello, I use the following in my ups.conf: # USB: [apc] driver = usbhid-ups port = auto desc = "APC 1500VA" pollfreq = 5 On my new motherboard (an Intel DP55KG), every once and awhile I get this: Broadcast Message from nut at box.com (somewhere) at 17:48 ... Communications with UPS apc at localhost lost Broadcast Message from nut at box.com

Hi all, Gluster and Ganesha are amazing. Thank you for this great work! I?m struggling with one issue and I think that you might be able to help me. I spent some time by playing with Gluster and Ganesha and after I gain some experience I decided that I should go into production but I?m still struggling with one issue. I have 3x node CentOS 7.3 with the most current Gluster and Ganesha from

David gave me some suggestions to check out on the servers, but so far, its all drawing a blank ... I have two servers right now that are updated to recent 4.8-STABLE kernels ... one was June 22nd, and the other was upgraded June 20th ... both of them have crashed since that date, and both of them tell me that they are unable to produce a core file, with the same errors: Jun 26 04:27:14 jupiter

I was wondering if anyone could help me with this one. I am having trouble getting LDAP and samba working properly on my Debian Woody box. I am using OpenLDAP 2.0.27-3 and the unsable packaged Samba version 2.999+3.0 and am using the samba.schema for my LDAP database. Whenever I try to join the network using either W2K or smbclient the LDAP debug log shows that the following filter is being

Hello, 1) Can not support .chm help files 2) Does not support locks for multi-user access to Access 3) Does support URLs from windows with '%' in the path 4) Numerous problems with multiple users accessing same folder. Comments/suggestions for fixing the above mentioned problems? Justin.

Hi, I have a question about: /sbin/installkernel I believe this line: LINK_PATH=/boot and usage of this variable... is a bug. What do others say? Using this script, as-is, I would need to chroot to make it work properly for a alternative INSTALL_PATH, right? who the heck is tyson? why did he re-write this? # # /sbin/installkernel - written by tyson at rwii.com # Cheers, AZ

I have a flash memory stick that is formated with ext3 file system. NOw, there is an application on it that I would like to copy to another memory stick. I can copy it, but when I do so, that application does not work properly (it won't start - boot problem???). Is there a tool that can copy an entire content from one flash stick to another? Thanks!!! -------------- next part --------------

Hello, I'm not sure how to go about this. Suppose I have a function SEXP boo(SEXP x){ //do something } Also, I have an executable which embeds R in itself. I would like to provide a R function to user code to call that calls 'boo' e.g ##user supplied expression that is given to me x<-1 boo(x) One way is to create a library with function boo that performs .Call to boo, but is

Thank You David and Mats for the reply, The reason I need to know that main is the entry point is as follows : I have a dead code elimination pass that removes the function call for boo. boo was initially called from the main function , but since the return in the main function has no dependency on boo, boo function call is removed. Now I want to remove the function definition of the functions

In <R 1.8.1 the following fragment worked properly, now (1.8.1) it creates the following warning/error: Any advice appreciated. stt <- data.frame() # load all datasets into a dataframe for (ds in 1:n) { stt[ds] <- as.matrix(read.table(fileList[ds])) } -- > stt <- data.frame() > # load all datasets into a dataframe > for (ds in 1:n) { + stt[ds] <-