similar to: Having trouble getting "join" to work successfully

We've got Samba 2.2.2 up and running fine on an RS/6000 (AIX) machine w/ NT authentication. We have one domain w/ multiple subnets, and need users on these different subnets to have access to the shares on this machine. We've tested from a different subnet than the one we originally ran smbpasswd on, and it fails (prompting for the passwd to the share...when it works fine from the

Samba is working perfect on our main subnet, but it won't for any additional subnets on this domain. We use NT authentication and my system is an RS/6000. I just found out that our routers for these additional subnets have netbeui/netbios turned off. Network Admin. said it's because they're set not to allow broadcasting (and they're not going to start), and turning

I've got Samba 2.2.2 installed and running fine on one of our servers (RS/6000 AIX 4.3.3 and using NT authentication), however, when I do Test #4 (from docs/textdocs/DIAGNOSIS.txt) it looks like this: npssrv{root}#nmblookup -B npssrv _SAMBA_ querying _SAMBA_ on 173.148.200.113 name_query failed to find name _SAMBA_ The test said I should get back the IP address of our samba server. I got

We're using Samba 2.2.2 on AIX (RS/6000) with NT authentication. We only want to authenticate at the PDC, and if they pass, they'll be able to map to whatever shares have been assigned to their Workgroup...we need to bypass any authentication at the AIX level. From the limited documentation (PAM-authenication-and-Samba.html) , it almost looks like PAM will accomplish this task. Is

We're running Samba 2.2.2 over an NT network. Our clients use Win95 (for the time being) and I wondered how we config Samba so they can map the shares using network neighborhood. We can map fine through MS-DOS, but when I try, for example, to map E drive to \\nfssrv\ads share via network neighborhood (where we ARE able to see the shares), it says E: is already connected to . Do you want

I've been reading chapter 3 of the SAMBA Project Documentation and I can't find any PAM files (pam.d directory) in my /etc. Is there something I need to compile in order to have these files? Thanks for any help. Darin DeCounter Atex Assistant System Administrator Las Vegas Review-Journal 702-387-5230 ddecounter@reviewjournal.com

Can anyone help me? I have Samba 2.0.5a running on SuSE Linux 6.0 (2.0.36) and Windows NT Server 4.0 SP4 (PDC). When I try to do a "smbclient -L MYUNIX" (according to the trouble shooting guide) I get the following message: Addes interface ip=195.90.254.xxx bcast=195.90.254.255 nmask=255.255.255.0 Password: Domain=[MYDOMAIN] OS=[Unix] Server=[Samba 2.0.5a] tree connect failed: ERRSRV

Hi, I just downloaded the latest version of Samba in the form of samba-latest.tar.gz Managed to unzip it with gunzip but cannot figure out how to install it. Tried rpm but didn't work. I have an earlier version of Samba (2.0.6) on my SuSE 6.4 machine already. Can I just install the new version or do I need to do some sort of uninstall of the previous version first. advTHANKSance, Mariann

We're running Samba 2.2.2 on an RS/6000 (AIX 4.3.3) using Windows 95 clients. We've tried the "hide files" and "veto files" option in smb.conf, but when the shares are mapped, we can still see the contents in Windows Explorer. We used the wildcard for all the contents of the shares (ex. hide files = /*.*/). The Samba manual only makes reference to Windows 98, so

As soon as I start up the daemons using the following commands, nmbd dies. /usr/local/samba/bin/smbd -D /usr/local/samba/bin/nmbd -D When I view the nmbd.log it gives the following. We're trying to set up Samba to work over 2 subnets. Smbd is ok and we can still mount our shares. Does anyone have any suggestions? Thanks for any help. [2002/10/22 10:37:55, 0]

I have 2.0.7 Samba for Solaris and I tried to join an NT domain but got the following: /opt/samba/bin> smbpasswd -j niaaa01 cli_net_auth2: Error NT_STATUS_NO_TRUST_SAM_ACCOUNT cli_nt_setup_creds: auth2 challenge failed modify_trust_password: unable to setup the PDC credentials to machine NIAAAWMAIL. Error was : NT_STATUS_NO_TRUST_SAM_ACCOUNT. cli_net_auth2: Error

Is anyone of aware of any known problems with Samba 2.2.2 and Windows 95, dealing with hiding shares and/or their content from Windows Explorer? We need to map these shares so our application can function properly...but the shares and/or their content should never be accessible via Windows Explorer. We have browseable = no for the shares. We also tried the "hide"option, but the

Hello I'm having some dificulties joining my Samba 3.0alpha (and 2.2.7a) machine to my NT4 domain. Let me tell you what I'm attempting to accomplish. I want to setup the Samba system to authenticate to my NT domain so that I can use NTLM Proxy authentication with SQUID. Through reading the docs, I'm under the impression that in order to allow thre SQUID/Samba setup to auth on

I'm having a little trouble adding my linux machine to my Windows NT domain... anyone know how to resolve this issue: [root@dev-zope-knox01 root]# smbpasswd -r admin1 -j CTI1 cli_net_auth2: Error NT_STATUS_NO_TRUST_SAM_ACCOUNT cli_nt_setup_creds: auth2 challenge failed modify_trust_password: unable to setup the PDC credentials to machine ADMIN1. Error was : NT_STATUS_NO_TRUST_SAM_ACCOUNT.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, With SMB and NMB services stopped, I issue: smbpasswd -j DOMAIN -r PDC with these results: cli_net_auth2: Error NT_STATUS_NO_TRUST_SAM_ACCOUNT cli_nt_setup_creds: auth2 challenge failed modify_trust_password: unable to setup the PDC credentials to machine PDC. Error was: NT_STATUS_NO_TRUST_SAM_ACCOUNT. 1999/10/25 <timestamp>:

hi! you have to add the machine account like: useradd -s /bin/false -d /dev/null machineaccount$ passwd -l machineaccount$ smbpasswd -a -m machineaccount have you done this? gianluca -----Urspr?ngliche Nachricht----- Von: Michiel_Lange@actuera.nl [mailto:Michiel_Lange@actuera.nl] Gesendet: Freitag, 28. Juni 2002 16:21 An: samba@samba.org Betreff: [Samba] samba and PDC don't

I'm still fighting with getting a Samba server (RH Linux 7.2, kernel 2.4.9-21, samba 2.2.4) to join an NT domain (NT 4.0, SP6). Everything I've read in the documentation indicates that this works well and readily, but I cannot get it to work. The error message received when attempting to join a domain is: ./smbpasswd -j TESTDOMAIN -r SMBTEST cli_net_auth2: Error

From domain, BOXYZZY.DOODAH.EDU Windows 2003 Server PDC, BOXY2K3A, I added computer account, BOXYUNIX. From the Samba 2.0.7 Solaris 8 computer, to be known as BOXYUNIX, as root I enter: # /usr/local/bin/smbpasswd -j boxyzzy.doodah.edu -r boxy2k3a cli_net_auth2: Error NT_STATUS_NO_TRUST_SAM_ACCOUNT cli_nt_setup_creds: auth2 challenge failed modify_trust_password: unable to setup the PDC

I am having problems getting samba to join a Windows NT Domain. I have done a debug. resolve_lmhosts: Attempting lmhosts lookup for name HPKFPN1<0x20> resolve_hosts: Attempting host lookup for name HPKFPN1<0x20> Connecting to 10.1.1.5 at port 445 error connecting to 10.1.1.5:445 (Connection refused) Connecting to 10.1.1.5 at port 139 lsa_io_sec_qos: length c does not match size 8

Hello I am a bit lost with a problem here, I have samba 3.0.2a on a suse 9 i386 box, samba installed from suse rpm. It is (was) joined to a 2003 AD domain. I had a pdf printer that was working yesterday and not working this morning. Changes made between yesterday and this morning: added "Netbios name = filetest2" removed netbios name AD admin password changed (I dont think this will