similar to: Samba PDC _and_ Samba member?

I can't get "security = domain" to work. Environment: Samba 2.2.2 on Solaris 2.6 and 8 I have a Samba PDC setup. I can get my Win2k desktops to login and access the PDC just fine. I setup another Samba on our Unix print server that I wan't to use "security = domain". It seems to be running in "security = user" mode. I did the "smbpasswd -j mtlaurel

I am trying to switch over to the new "style" of printing, but when I do, I loose the ability to print duplex. I have two servers. The old one (spike) is setup as a file server, etc. and the print services date back to the early 2.0 days. It is currently running 2.2.2 with the original printer setup. The printing works ok with this server. People can print using features of the

We have started to upgrade or Unix servers from Samba 2.0.7 to Samba 2.2.5. I did one machine as test and all worked fine. Today I tried adding two more today and both come up with the "Incorrect password or unknown username" box in Windows Explorer. All the Unix servers are running Solaris 7. I did the make on an NFS file system once and then ran 'make install' on each

Dear all, I have a serious problem that I can't rectify. My smb.conf is as follows. I use Solaris 2.6 on SPARC # Global parameters [global] workgroup = SOME_DOMAIN netbios name = 220R server string = Samba For Backup On Solaris security = SERVER encrypt passwords = Yes update encrypted = Yes obey pam restrictions = Yes password server = *

Hello, Sambas, Recently, I met a problem with my Samba 2.2.3a server. It is configured as a Domain Member, sometimes I couldn't get user list from PDC ( a Win2k server), but it come up again soon , say 5 seconds. I had thought it is PDC's problem, but it seems PDC is fine. Are there any other reasons will cause that? Some log messages attached. [2002/07/08 08:42:44, 0]

I have installed Samba 2.2.3a on a Solaris 2.6 box, and it has been configured with a small smb.conf that sets security = domain, workgroup = GFMNET, password server = GFMNET01, I have succesfully joined domain GFMNET (controlled by GFMNET01). I can attach to resources anywhere in the domain from this new box(E250), but any attempt to connect to its resources results in failed authentication. I

Trying to set up a SAMBA print server using SlackWare 8.1. Have successfully joined it to the domain, but cannot browse into the shares, as it constantly asks for a password, and refuses to accept any including root and NTamdin accounts. Anybody have any ideas error logs and smb.conf are below. This is from the machine specific log file: [2002/08/21 11:41:56, 0]

I have samba running on RH 8, samba 2.2.7-2, and using winbind.. Want "homes" share to automatically display as users access it. Thought I could use the %u but am having no luck.. Currently, have it set up but when user clicks on home share a username/password dialog displays and will not accept valid credentials for that user? Have my config and log snips from nmbd and machine

Quick run down of my setup: NT 4.0 PDC, Samba RedHat 8.0 with samba 2.2.5-10 on it.(Also used RedHat 7.2 with 2.2.6 final as well) with the exact same results. When I run wbinfo -t, I get Secret is bad 0xc000018b. I have been trying to figure this out for a few days now and can't get it working correctly. If I run wbinfo -u, all of the users appears in the list, as well when I run wbinfo

Hi all, We are having some problems getting a solaris 9(sparc) file server running samba 2.2.2 to authenticate aginst a windows NT 4 PDC. Let me say first that this was all working at one time, then we had some data corrumption on our NFS mounted /usr/local, and had to restore from tape. Due to some issues with solaris ufsdump and ufsrestore, stuff was not quite put back properly. We do

I am having a problem with getting samba 2.2.3a to work with our current set up. I used to have samba 2.0.7 working perfectly, but decided to upgrade to try and get Win2k clients to be able to access the shares on the UNIX system hosting samba. When I try and access any of the shares on samba (it doesn't matter who the client is) I get the following messages produced in the log file:

What kind of error is "NT_STATUS_OK"? Logs below: [2003/01/29 15:30:46, 3] libsmb/namequery.c:resolve_lmhosts(768) resolve_lmhosts: Attempting lmhosts lookup for name TESTE011<0x20> [2003/01/29 15:30:46, 3] lib/util_sock.c:open_socket_out(845) Connecting to 192.168.100.1 at port 445 [2003/01/29 15:30:47, 0] rpc_client/cli_netlogon.c:cli_net_auth2(157) cli_net_auth2: Error

Hello everyone, I am trying to configure a Samba 2.2 server to allow users to mount their home directories (stored on a UNIX filesystem) from Windows after authenticating against a Windows 2000 Domain Controller. The Samba server is 2.2.3a compiled with acl support on Solaris 8. I think I am experiencing some (hopefully) basic configuration issues and can't seem to get it to work. I

Hi all, We use samba here at our site as an interop solution for use with ClearCase. I'm afraid I'm just a lowly ClearCase administrator not a Unix administrator. All our solaris servers are running Solaris 8 and we're using Samba version 2.2.2 First Question : Our Unix Admin guy has said that we can't upgrade our version of Samba as 2.2.2 is the latest version that Sun have

I've set up Samba on Mac OS X to do pass through authentication to the nt domain in AD several times now. No big deal, it usually just works. Now, however, it doesn't appear to be working. Note the relevant part of the transaction below (loglevel 4). Steps to replicate: a) Add pre-Win2K account with AD Users and computers b) sudo smbpasswd -j EXAMPLE -r WINSERVER -U

Hi, I'm new to this list, so sorry if this has been brought up before. I've searched the archives, and it looks like I'm having the same problem as Bill Gardner in his post: http://lists.samba.org/pipermail/samba/2002-April/070640.html Unfortunately I couldn't find any answer to that post in the archives, so I'm asking here.. I have a Samba 2.2.3a server running on IBM AIX.

Hello, i need help because my samba server is not working. I have a Samba TNG server which SUCCEEDS in authenticating all users stored in a LDAP Directory. They (admins before me) installed in a RH7.3 Box the rpms of Samba HEAD 2.2.3a which *sholud* make available some shares (e.g. users' home) while authenticating against the TNG. The previous version of Samba HEAD did work but since its

Dear All, What can I do if my Windows PDC won't recognize the machine account it has just created for my samba server? I made sure I followed all instructions in the DOMAIN-SECURITY HOWTO: # smbpasswd -j DOM -r DOMPDC1 -Uadministrator%password Joined domain DOM. # And smb.conf containing the following: [global] security = domain domain logons = yes workgroup = DOM password

Hi I updating my PDC from Samba-TNG to Samba 3.0 RC4 with LDAP. The Windows clients and servers work fine but the Samba 2.x servers are unable to join the domain. Samba 2.x server: [global] netbios name = smbold workgroup = MYDOMAIN security = domain encrypt passwords = yes password server = myserver I create the machine account on my Samba 3.0 PDC ./smbpasswd -a

Hello, I've a samba 3.0 (today's cvs) server running as a PDC. The Win2K/NT Clients can login without any visible problems, but samba 2.2.7a domain member can't validate users in security=domain mode. I've followed the howto in the docs and joyning the domain with 'smbpasswd -j BRGS -r ALDEBARAN -Uroot%pw' works just fine, the samba 3.0 DC even creates the machine$