similar to: No print to Samba (Linux) printer from Win98 - SOLVED.

Here is my smb.conf. Maybe someone can tell me what I'm doing wrong. [global] workgroup = HOMEGROUP log level = 8 path = /var/spool/lpd/HPDESKJET default service = global writable = yes printer = HPDESKJET remote announce = 192.168.x.x/HOMEGROUP print command = lpr -l -P%p %s printing = bsd load printers = yes dns proxy = No lprm command = lprm public = yes printcap name =

Mike Watson wrote: > I don't have an explicit print command in my smb.conf. Is that required? All > the examples I have do not have an explicit command. Since I'm use lpr, I'll add > that to my config and see how it works. > > BTW. The Linux printer is an HP Deskjet 600. Old but it still works---crispier > than my wife's laser printer. > > Thanks! >

sorry if i repost this question, but it's urgent. has somebody an idea? if i broke any rules with this mail, please tell me, what's wrong with it. thx in adv, gk -------- Urspr?ngliche Nachricht -------- Betreff: [Samba] problems with win98 and samba 3 Datum: Fri, 29 Jul 2005 16:24:29 +0200 Von: kurt weiss <maillists@kwnet.at> An: 'samba@lists.samba.org'

Hi list, i have installed the samba3 - Version 3.0.9 - in my FreeBSD server. I have one HP1300 LaserJet, and its work fine in my FreeBSD. When i log in the win98, i can mapping the printer, but when i send to print a test page, its leave all wrong. I'm trying to print some document in the Word, but i have the same result. In my smb.conf i have this configuration: [Global] load printers

-------- Original Message -------- Subject: Part 2: the RAW Facts on Filesystems Date: Fri, 1 Mar 2002 22:16:45 -0600 From: "Mike Chambers" <mike@netlyncs.com> Reply-To: enigma-list@redhat.com To: "RedHat - Enigma" <enigma-list@redhat.com> "[...] Once again, the ext3 filesystem is the clear winner for database creation, loading and indexing. And once again

Hi all! I'm using Samba 3.0.2a with CUPS serving about 50 win98 clients... All my printers works fine though samba/cups, but sometimes nobody can print in a certain netword printer. I open my CUPS (http://localhost:631) and see the printer stoped (not always) and always with one of the errors messsages above: Printer state: Idle, accepting jobs "Unable to connect to SAMBA host, will

we're using samba 3.0.11 (updated from 2.2.19) after the update, the windows 98 machines all showing only the short filenames on the server. (on other servers there are long filenames still available). can anybody give me an idea? thx in advance kurt smb.conf: ====================================================================== [global] # 2005-01-05 einbau wixp # vfs object =

Hi all, All Win98 & Win2k used to be able to connect, but as of last week only one Win2k is able to access the share folder, but not without a little issue. Another Win2k in the same subnet have intermittent connection issue and Win98 is not able to access the folder. Setup: Samba 2.2.2 install into Solaris8 in a subnet with two other Win2k server. This subnet is connect to a number of

Hi all.. I having problems to change the client's autentication password (on Samba pdc) I have only win98 clients... They can login, but can't change their passwords in Control Painel > Passwords (the error message says that 'password is incorrect') I'm running Samba 3.0.2a on Mandrake 9.2 with 50 win98 clients... I know that this version has a bug for password changing

Greetings, I have configured Samba 2.0.5a as the master domain controller in a Samba server / Win98 client configuration (no NT anywhere) and most everything works great. Users are authenticated and shares are browsable. I configured the [netlogon] share using the example from the Blair book. Right out of the block it worked like a champ. However, at some point the netlogon.bat stopped being

Hi all, This is a new install on a network comprised of win98 and xp machines. I'm a relative newbie to samba and getting some errors and problems. I would much appreciate some advice on my setup. The setup is samba-3.0.23,1 running on FreeBSD 6.1-STABLE as a windows server replacement and with clients mostly running dos POS software on win98 machines and other dos and windows software on

I set up a print/fax server here using RH Linux 6.0, and Samba 2.0.3. The printer is an old (but still very reliable) HP Laserjet 4. Printing from the Linux box using lpr works fine. However, whenever someone tries to print from a Windows98 box through SAMBA, there is an extra page printed on the end. This gets really annoying to the users, more so because the extra pages cannot be put back into

I'm stuck. I have Samba running on my Red Hat 7.2 Linux box. I can mount by remote dirctory on the Linux box via Samba. But I can't print to the Linux printer. I have a Linux printer installed and I can print to it using lpr. I have a printer configured in Samba and can see that from the Win98SE box. I've clicked on the Samba printer name and configured a Win98 printer.

I have Samba 2.07 on Mandrake 7.2 distro. I am proxying a DSL connection successfully over Squid. I do not have ipchains running but with all the BS Mandrake like to pack on it's hard to tell what it's scripts all do. All the tests with the smbclient on the samba machine work fine. Also all the test with nmblookup. I have a clean Ping from both ends. When I use smbclient to view my Win98

Hi I hope you could help me. I don't get any answer i the newsgroups. I have a Win NT box as a PDC and running the linux box as a domain member. I have updated to Samba 3 on linux box. I joined the domain with no errors. Everything works fine from another NT box that I have I can browse the linux box shares and so on. But if I do the same thing from the Win98 machine I get this error messages

i bought the sams teach yourself Samba in 24 hours, but i still have some questions: I have few machines on network, Linux machine as server and Win98 Client machines... TCP/IP working fine... At first workgroup name = mygroup all 3 machines show up in network neighborhood, but i cannot connect to samba machine... it asks for password, but password for what user? I don't get it... it

hi all, i've spent an incredible amount of time trying to get samba working between linux (satan, debian testing, samba 3.0.0) and win2k (lucifer) and i'm at wit's end. i'm begging for help. i spent most of the morning reading samba docs, and have gone from knowing zilch about MS networking to, well, a little something about MS networking. my ultimate goal is to be able to

Hello, this is my first post so hi to everyone! Situation: server: sun netra t1, solaris 8, running samba 2.2.8. ip address 10.10.10.220/24 client: windows 98 pc, 192.168.0.55, with samba server info in lmhosts file and a wins server that reads the samba info. problem: when i try to access resources on the samba server, i get an error, (can not find the server) so i started sniffing the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everybody I'm trying to set up a samba server on a win98 net. Samba server is running over linux Fedora Core 3 and the domain server and dhcp server are running on a windows xp. The problem is that can connect to any resourse at the samba server, and I got the message: on Win98 client "No route host to the network" or something

Ok, I've managed to print to my HPDeskjet 694c attached to a Solaris 8 box running samba 2.2.2 from Win98. Problem is with the left margin, there are these little lines (garbage) running down the 1st column on the left side of the page. Also, when I print a page from Word 97, the whole page doesn't print (about 95% of it) and starts a little too far down the page. Printing was perfect