similar to: deskjet on Solaris

Ok, I've managed to print to my HPDeskjet 694c attached to a Solaris 8 box running samba 2.2.2 from Win98. Problem is with the left margin, there are these little lines (garbage) running down the 1st column on the left side of the page. Also, when I print a page from Word 97, the whole page doesn't print (about 95% of it) and starts a little too far down the page. Printing was perfect

did U use : smbpasswd -a user th passwd must be the same rick. >From: "Gary Ferrer" <gary@ferrer.yi.org> >To: "Samba-users" <samba@lists.samba.org> >Subject: [Samba] (no subject) >Date: Fri, 22 Feb 2002 00:07:04 -0800 > >Hi people, sorry for the previous HTML stuff, I hope this time it's plain >text. Here's my problem:

An smbclient -L listing from the linuxbox shows resources available on = the sunbox: linuxbox:~$ smbclient -L sunbox added interface ip=3D192.168.0.3 bcast=3D192.168.0.255 = nmask=3D255.255.255.0 Password:=20 Anonymous login successful Domain=3D[VANCOUVER] OS=3D[Unix] Server=3D[Samba 2.2.2] Sharename Type Comment --------- ---- ------- root

I'm not sure if this is a samba/solaris problem or a Win98 problem and I'll tell you why. I have a Solaris 8 server runing samba 2.2.2, a linux/samba 2.0.7 box and a couple Win 98 boxes. When I did a complete restore of my Win98 box from tape, I could no longer access the Solaris 8 server via network neighbourhood. I can see the Solaris/samba box there with the other Win98 and linux box

Hi people, sorry for the previous HTML stuff, I hope this time it's plain text. Here's my problem: I'm not sure if this is a samba/solaris problem or a Win98 problem and I'll tell you why. I have a Solaris 8 server running samba 2.2.2, a linux/samba 2.0.7 box and a couple Win 98 boxes. When I did a complete restore of my Win98 box from tape, I could no longer access the Solaris

I'm trying to get Wine to print through it's PS driver, without success, on a HP DeskJet 694C, configured on Linux with the cdj670 driver. What I get to see on screen after I attempt to print are three windows with exclamation marks on a yellow triangle and garbled text. The first window is titled "Printer name", the second "Device name", the third "Output".

hello, i am new with samba and try since 5 days to let my HPDeskjet 690c print under NT 4.0 with a LINUX samba server. I work with SuSE 6.2. Printing with Linux / KDE /Staroffice is no problem. the spool directory from smb.conf (/var/spool/lpd) i set with chmod 777 writeable. with KLpq / Klp / lpq i see the document incoming and outgoing, but nothing happens!!! what do i make wrong / what can I

I now have the deskjet print printing from my Win98 box. Something in the "hpdeskjet" entry was causing the error of "No machine name found" to appear when I tried to print from Win98. I fixed this by deleting the entry and re-creating it. I also specifically added allowed IP addresses instead of using "all" in the config file. I created a generic text printer

Hello, I have just started using samba a couple of weeks ago. I am using Slackware 9.1 and windows 2000. i can see everything. on my windows box i can see my linux box and visa versa. but i have a HP deskjet 932c on my linux box and i want to be able to print from windows. windows can see the printer in network neighborhood but it says that it is unable to connect access denied. i

I have Samba 2.2.7 running on Redhat 8 (fully updated). I have two printers set up - a laser and a Deskjet 920C both connected to the Redhat server via USB cables. Printing is managed using CUPS although I get the same problem with LPR and Webmin configured printers. The laser works fine, the deskjet doesn't. The deskjet works with a generic windows HP Deskjet or HP Deskjet plus driver in

Hi list, I have troubles with printing on a HP Deskjet 1220C (connected on network through jet direct device). I have a print server, which use LPRng and allow clients to print on this 1220c printer as well as laserjet printers. If client is Linux, I can print on all printers. So I guess my LPRng config is good. Another server runs Samba 3. This server's printcap redirect jobs to my

While setting up a RH9 server on my LAN, I ran into the same situation as it has been described in an earlier posting on this list list, by Joseph Vornehm (see msg29910). Namely, when printing to a samba-shared HP DeskJet 990cxi from a windows station, there were no errors were reported, but nothing was printed. So, as described in that earlier posting, I opened the file /etc/cups/mime.types with

Hi, our system is as follows: Linux Server (Debian woody), Samba 2.0.7, several Windows clients (NT 4 Server and Workstation, Win95), Tektronix 840, Laserjet 4000 and Deskjet 2000. As printing system we use ESP Print Pro 4.04 (which seems to be comparable to cups 1.0x). In smb.conf we included "printing=cups" and the following printer section. [printers] comment =

Howdy all - I have Samba 2.0.3 running like a champ on a dual PPro 200, 128 MB RAM, running Slackware 3.6, kernel 2.2.5. Running like a champ as far as file sharing is concerned, that is. I have an HP Deskjet 1000c hanging off the parallel port. I set up a raw printer in /etc/printcap, the line looks like this: dj1000|DeskJet 1000c:sh:lp=/dev/lp0:sd=/var/spool/lpd/dj1000 the printing section

As described here: http://lists.samba.org/archive/samba/2004-February/080219.html (and on other places) some drivers will refuse to work after installing them using point n' print. My w2k client gives a nice acces violation after installing the hp deskjet 990c driver. I checked "man smb.conf" and found some informations about the problem. I tryed to set "default devmode"

We have a last problem (I hope) before rolling out our new SMB domain using SuSE Linux 8.2 with Samba 2.2.7a and cups 1.1.18. It seams that not every windows printer driver is working correctly. Samba is configured as a PDC and distributes the windows printer driver files. The printing system is cups. Printers are connected via JetDirect-boxes to the network. Printers like the HP LaserJet 4100

Hi, i want to install the Adobe-PS Drivers into samba, so that the Clients can download them. I first had Samba 2.2.3 from debian woody, where the cupsaddsmb program did'nt work at all. I the upgraded to samba 2.2.7 and tried to install all the drivers by hand using rpcclient. Now I've got 2 problems: First one is that I cannot deinstall the various drivers from the servers list. When

Hello all, Does anybody share HP Deskjet 6940 and HP Deskjet 6988 off a samba server successfully? I currently using Samba versions 3.0.24 Ubuntu Fiesty Fawn in my production environment. I also the issue occurs on my laptop which is running Gutsy Gibbon 7.10 which uses Samba 3.0.26. The issue is when my users try to print multiple copies they can not through the samba server. These printers

We have a department using a DOS based application (written in C) within an MS window. By this I mean that the application is text based, and has no mouse capabilities at all. The application object code and its database all reside in a departmental share on our Samba instance on a Solaris box. We have about 30 people using the samba shares on this box at any time. The users have sent me an

Here is my smb.conf. Maybe someone can tell me what I'm doing wrong. [global] workgroup = HOMEGROUP log level = 8 path = /var/spool/lpd/HPDESKJET default service = global writable = yes printer = HPDESKJET remote announce = 192.168.x.x/HOMEGROUP print command = lpr -l -P%p %s printing = bsd load printers = yes dns proxy = No lprm command = lprm public = yes printcap name =