similar to: Anyone know of complete hardware solution based IDE Raid Controllers?

CentOS 6.4 (amd64) stock kernel. HBA FC Accusys ACS 63200NT I built the driver from source, insmod activates the device and I can see the 24 TB storage volume via 'parted --list' I have created a XFS files system and mounted it under /srv/ Where do I need to install the driver in /lib/modules/ ... directory tree so that it is loaded automatically when the system boots? TIA, -- Arun

We're deploying an asterisk-based phone system at all of our branch offices in an effort to eliminate long-distance costs incurred from the constant branch to branch calls. We're using the Snom 300's at all offices for the desk phones and X100P cards to interface to 2 analog lines. I'm having a problem tuning all the echo out of the system. So far two branches are using the

Problems building celt-0.5.2 for blackfin. Use the following to configure: #!/bin/sh # bfinconf # Set up configuration to cross compile on blackfin ./configure \ --host=bfin \ --enable-fixed-point \ CC=bfin-uclinux-gcc \ CFLAGS='-O2 '\ '-mfast-fp '\ '-ffast-math '\ '-Wall -Dlinux '\ '-D__linux__ '\ '-fno-strict-aliasing '\

I am having an issue with a couple of phones where they ring, but there is a long delay after the phone is picked up before the audio starts. My setup: * Server running Asterisk 13.9.1, Dahdi 2.11.1 w/ OSLEC * Server is CentOS 7 * Quad core CPU with 16GB Ram * 2 Snom 300 phones. * NO NAT. Server and phone are on the same subnet with only a gigabit switch between them. * Digium

Well, I thought I had the problem solved. Ported everything over to PJSip and build RDNS records for the phones and the server, but I am still experiencing the problem on incoming calls. ** On 6/7/2016 1:00 PM, Faheem Muhammad wrote: > I've faced the same issue. The issue was related to DNS, the reverse > lookup query failure caused the delay around(7-9 seconds). The purpose >

> On 9 Dec 2016, at 15:55, Rowland Penny via samba <samba at lists.samba.org> wrote: > > On Fri, 9 Dec 2016 15:23:24 +0000 > Kevin Davidson via samba <samba at lists.samba.org> wrote: > >> >>> On 9 Dec 2016, at 14:26, lingpanda101 via samba >>> <samba at lists.samba.org> wrote: >>> >>> Still no luck getting getent to

Hello, Researchers at Oregon State University are striving to conduct research to learn more about the free/open source software community landscape as it relates to older adults. We have identified you as a leader for a free/open source software community. If you?re interested, we will either do an in-person interview (if you are local to the Corvallis or Portland area), or an interview over the

> On 9 Dec 2016, at 14:26, lingpanda101 via samba <samba at lists.samba.org> wrote: > > Still no luck getting getent to retrieve user information. I have uid's and gid's setup for all users I am attempting to query. But did you give Domain Users a gid? If you don’t do that, winbind and getent will not find any UNIX users (doesn’t matter if the users have a uid and gid

Having problems with rfc2307 user ids. This was working briefly and now it’s not. samba and winbind v 2.4.2.10+dfs wbinfo -u lists all the domain users wbinfo -g lists all the domain groups getent group lists all the local groups and the AD domain groups that have a UNIX gid set getent passwd lists only the local users, then pauses for a moment, then nothing. AD users can’t log in and can’t

On Sat, 10 Dec 2016 09:07:13 +0000 Kevin Davidson via samba <samba at lists.samba.org> wrote: > > And note this newly highlighted section of the wiki, which deals with > the UNIX admin’s potential desire to “fix” this problem that users' > primary group is “wrong”. > > https://wiki.samba.org/index.php/Idmap_config_ad#Prerequisites Care to expand on what is

I'm having an unusual problem at one of my branch offices. Every now and then they will make a call and the person they call is unable to hear them, but they are able to hear the person. The Asterisk server has only one ethernet interface and is on the same physical network as the 2 snom 300 phones and is connected to the PSTN lines with a Rhino R4FXO-EC card. Usually hanging up and

Hello, I am currently trying to show the abundance of two species of zooplankton within the North Sea as pie chart bubble plots. I followed Werner Wernersen's advice in R help (http://finzi.psych.upenn.edu/R/Rhelp02a/archive/48644.html) and used Paul Murrell's paper "Integrating Grid Graphics Output with Base Graphics Output" (in R News) to try and do this (using the gridBase

I'm having an issue with some Snom 300s on a server running Asterisk version 13.9.1, Dahdi 2.11.1 w/OSLEC and pjsip 2.5.1. There is _*NO NAT*_ involved. Phones and server are plugged into the same network switch, all on the same IP range. The server is running a Wildcard AEX410 analog card with 2 FXO modules receiving incoming analog lines. Occasionally, in the middle of a call, the

http://bugzilla.mindrot.org/show_bug.cgi?id=722 Summary: scp not found Product: Portable OpenSSH Version: 3.7.1p1 Platform: All OS/Version: Solaris Status: NEW Severity: normal Priority: P2 Component: scp AssignedTo: openssh-bugs at mindrot.org ReportedBy: jim.a.davidson at bt.com I have

Hi, I''ve failed miserably in my endeavours so far and I''m at the point where help would be much appreciated. I want to have 3 bandwidth limited classes on my Internet interface. In each of those classes I want 3 prioritization bands, and then use "tc filters" to place the traffic into the correct class and priority. The problem is that the traffic

I think I have my echo problem solved, now i need to tackle the MWI. I can't seem to get it to light up. I'm using Asterisk 1.4.14. Here's a section from my sip.conf for my test phone: [general] context=internal allowguest=no allowoverlap=no allowtransfer=yes notifyhold=yes bindport=5060 bindaddr=0.0.0.0 srvlookup=yes pedantic=yes vmexten=9998 at internal ;vmexten=*97

Still grasping at straws trying to solve DTMF detection issues with one of my asterisk servers. This particular server is now running Asterisk 1.4.18.1 and Zaptel 1.4.9.2 in runlevel 3 (console only) with 2 X100P cards. I have tried adjusting channel gains, turning call progress and relaxdtmf on and off, switching echo cancelers, just about everything that Google turns up and I can't

I am running a REHL 4.3 server with samba RPMs: 3.0.10-1.4e.9 When an os X client connects to our samba server it can copy files from the server an overwrite other files that already exist. However when it comes time to create a file, it fails, where this process works correctly from a windows system. In addition, I can go to where the volume is mounted on the os X (10.3.7) machine and copy

Ian Davidson Software Developer Clear-Com, a Vitec Group brand 7400 Beach Drive IQ Cambridge Cambridge CB25 9TP United Kingdom TEL: +44(0) 1223 815000 DDI: +44(0) 1223 815977 Fax: +44(0) 1223 815001 ian.davidson at vitecgroup.com www.clearcom.com <outbind://6-00000000D7A71728D49A6F42A4D030A8BDCE2F0D070003A2EBDA91A95F4

I have had this problem both with 8.04 and 9.04 / with 1.0.1 and 1.1.29 i have intel celeron 3.33ghz radeon express 200 onboard ati graphics I install steam which has a wierd thing of scrolling down and right staying there so i must install games threw the actual website i downloaded the portal demo and here is what happened on 8.04: Launch options= -dxlevel 81 (to load intro screen with