similar to: No writing to [homes] share

I'm having a problem with files locking so that every time the are opened up they are opened as Read-Only. Windows doesn't see them as readonly but Samba thinks that they are write=no and so they can't be saved or deleted. I've included a log, my smb.conf, and a getfacl of a user's home directory as well as a getfacl of the directory from /home. Any help would be

net use * \\samba\mgerdts Debug level 10 says: [2001/06/22 10:28:49, 1, pid=29656] smbd/password.c:pass_check_smb(554) Couldn't find user 'mgerdts' in smb_passwd file. [2001/06/22 10:28:49, 2, pid=29656] smbd/reply.c:reply_sesssetup_and_X(951) NT Password did not match for user 'mgerdts'! [2001/06/22 10:28:49, 2, pid=29656] smbd/reply.c:reply_sesssetup_and_X(961)

I have a box running asterisk 1.4.17 that had been working. it has 2 uniden phones connected on it. This was working and now the phones dont ring when calling each other. below is the sip debug. I cant see why the other phone does not ring? I also tried changing the canreinvite for no to yes but that made no difference after restarting. Very simple network. server, linksys router and 2 phones.

I am using asterisk 1.4.18 with a polycom phone. sip.conf has: [532] type=friend username=532 secret=XXX dtmfmode=RFC2833 host=dynamic context=smvoice-sip callerid=532 qualify=no nat=no disallow=all allow=ulaw allow=alaw allow=gsm canreinvite=no I call into the dialplan and try to play demo-congrats and I hear nothing. Firewall is disabled. Everything is on the 192.168.1.X network for this

Hello list, Grandstream GXP2010 phone calling to Snom 320, Asterisk in the middle. Grandstream allows for 8 different codec specifications. I have defined them as 4 x G726 & 4 x alaw. Snom allow for 7 different codec specifications. I have defined them as 3 x G726 & 4 x G729. The SIP peers are both defined as : disallow=all allow=g726 allow=alaw allow=g729 allow=gsm This is the

Are you using wins? Try lmhosts for the start? Are all machines on the same subnet? Just a few hints to start with ... Christian > > > I have absolutely no clue what I could do to fix it. The only solution I > can think of, is to downgrade to redhat 6.2. > > Your help would be greatly appreciated. > > Stefan Kaes > > portax.com GmbH > Zielstattstrasse 40,

This is a single aastra 9113i sip phone. asterisk 1.0.9 Why do I keep seeing this in the logs ? ------------------------------------------------------ Sep ?8 18:44:25 VERBOSE[18779]: Scheduling destruction of call '9157b7d5ef36e8ec556a68e446d4ad59@192.168.1.100' in 15000 ms Sep ?8 18:44:31 DEBUG[18779]: Setting NAT on RTP to 0 Sep ?8 18:44:31 VERBOSE[18779]: 11 headers, 2 lines Sep ?8

Hello list, using Asterisk 1.4.30. I want to set the SIP-header Remote-Party-ID to display the name of the calling party on my phone in stead of the number. This is the dialplan : exten => 10,1,NoOp() exten => 10,n,SIPAddHeader(Remote-Party-ID: "eric" <sip:10 at 192.168.1.150>;party=called ) exten => 10,n,Dial(SIP/test2) This is what the CLI shows : /[Jul 12

A summary of my problem, I had wrong UIDs for a user (eg pmal) between the /etc/passwd file and the smbpasswd file. When I was trying to loggin from a couple of machines running either win nt or win 98 I was reading in the log files that the loggin could not be completed because the UID were wrong but there were instances were I could loggin from another computer with the same username. I really

Hi, My configuration is SipPhone<-->*1<--->*2. My asterisk version is 1.4beta3. I installed pwlib,openh323,chan_h323. When i call from SipPhone--(SIP)-->asterisk1---(H323)-->asterisk2, there is no audio. Using 'rtp debug', I can see that rtp packets are being received. Rtp packets are being exchanged. I also tested chan_ooh323, but to fail. Can anyone recommand best

Hi all, I am trying to use a "Siemens optiPoint 300" IPPhone (H.323 only) with Asterisk (1.0-RC2). So far I have been using the H.323 channel included in the tarball (Nufone ?). I encountered a strange behaviour when I try to make a call from the IPPhone to my Asterisk box : =====> here is the H.323 configuration for the incoming calls (192.168.1.50 is the IP of the

Hi there. I am trying to connect Asterisk to a local danish ip-telephony provider. But is having some difficulties. First I thougt they were related to the provider. But then i started debugging on the Asterisk (aix2 debug) When I make a call using AIX to the provider everything seems to work just fine: *CLI> -- Accepting AUTHENTICATED call from 192.168.1.150, requested format = 1024,

fc2, samba 3.0.9 The samba server is PDC. Temporarily, the server was dhcp, which gave it the IP 192.168.1.64 we then set it to static 192.168.1.150, which is what we want. however, the different windows clients, on and off, on ping and such, resolve INTRANET, the netbios name of the pdc, to 192.168.1.64 still, despite me removing wins.dat. I even tried the following suggestion, to no avail

Ok, I have linux samba pdc wins server 192.168.1.150 behind a cisco router(192.168.1.1). everything else behind that router works fine, clients look at 192.168.1.150 as WINS server. vpn over to netgear router(192.168.2.1), with 192.168.2.x subnet. the netgear tells all dhcp clients to look at 192.168.1.150 as WINS server. clients on 192.168.1.x network can ping clients on 192.168.2.x network

Ok...trying to follow up here and see if someone can help me out, and let me know what is exactly hapening here. I have a few ideas, but I wanted to post here. As I said in my previous post, I am having problems browsing the corporate network from a Branch Office. Doing some testing, here is some output from my log.nmbd on my WINS server: [2004/06/25 12:20:45, 0] nmbd/nmbd.c:terminate(54)

I need help setting up a basic routing between two nic's on my CentOS desktop. I thought I'd understood the basics, but ... I don,t want a nat router, just packets forwarded back and fort. This is what I thought would do the trick, but didn't. Can someone please give me some pointers or links so I can get this right. # echo "1" > /proc/sys/net/ipv4/ip_forward # route

I have just speant several hours trying to nut out an error with a new installation of SAMBA 3, and the results may indicate something has changed with the way the Name Server (nmbd) responds to certain request. It could also be network stack related, but I am about at my limit of skills to diagnose it any further. I have just installed Fedora Core 1 to a test server in order to play around

Hello everyone. I have a question about setting up a WINS server and to allow browsing across VPN tunnels. Let me give my setup... Running FreeBSD 4.9, with samba-3.0.4. Sole purpose right now is to just be a WINS server on the corporte network. We have 3 VPN tunnels setup at remote locations that will need to access the network and browse the corporate network. All the clients on the 3 branch

I'm replacing my old Fedora 7 mail server with a new one running CentOS6.3. The old server uses plain-text logins and password for pop3 and IMAP. I'm unable to get dovecot to authenticate. It's failing the password check. Trying 192.168.1.50... Connected to orion (192.168.1.50). Escape character is '^]'. +OK orion.crucis.net Dovecot ready. user joe +OK pass abcdefg -ERR

On Sun, 6 Nov 2016 16:20:32 +0100 Maximilian Kirchner via samba <samba at lists.samba.org> wrote: > Thanks a lot for your help so far. The main reason I do not use vms > is that the server is pretty limited in RAM so this would only be my > last resort. To prevent confusion: srv.wie (192.168.1.50) is the same > machine as smb.wie (192.168.1.55), I seperated them just now to