similar to: winbind: can't join DOMAIN with smbpasswd

Okay, let's try this again. I've gotten my samba 2.2.2 server doing everything BUT winbind, users can print, see shares, etc. And they're authenticating against a real NT 4.5 SP6a server (newly generated). When I get to the step where I need to join the domain, this is what happens: [root@NetServer samba]# smbpasswd -j BIO2RES -r DOMAIN-CONTROL -U Administrator Password: Error

Hi, While going through DIAGNOSIS.txt on my samba 2.2.2 server, I came across the following test results: Test 5: [root@NetServer samba]# nmblookup -B resaddr8.research.bio2.edu '*' querying * on 209.64.53.8 name_query failed to find name * This appears to be a partial failure? Test 6: Initially, I got: [root@NetServer samba]# nmblookup -d 2 '*' added interface

I'm reading man nut.conf, and trying to understand the MODE directive. Does the specification mode=netserver mean that only upsd and the driver(s) will be started, and that upsmon will not be started? The man page says "Distribution?s init script should source this file in order to determine which components have to be started." But looking at the code which starts upsd in the

Hi! anyone knows where to get some info for kernel (maybe via sysctl) and or samba tuning for high performance ? I have read all the samba docs available, so aim looking for others tips besides the tcp tunings usually applied in smb.conf ? i am setting a server on a client site, with many clients (about 100), and i am using a real server hardware (an HP netserver with xeon procesor@2.8Ghz, 1Gig of

I have made changes but it is still the same. That is when the server gets the lowbat/noAC signal it does shut down as expected but the slave does not. Perhaps it makes sense for me to list the present settings: On the Master: nut.conf MODE=netserver ups.conf [sdrups] driver = genericups port = /dev/ttyS1 desc = "For Server &

Hi all, I'm trying to setup a RAID-1 with Centos4.2 on HP Netserver E60. The raid consists of 2 9,1GB SCSI disks. The partitioning and installation process went smoothly, but after it finished and rebooting, there is an error: Missing operating system. The partition is: / /home swap Bootloader is on device md0. What could be possibly wrong? Thank you, -- Fajar Priyanto | Reg'd Linux

hello, i have a computer (with debian 8 jessie installed) that i want to plug to an ups (apc smt 750i) to act in netserver mode. i've installed nut packages and configured it and all seems to work ok except that when the server shutdown itself it ups doesn't "reboot" the outlets. i've tested the same config (/etc/nut/*) just changing hostnames in another debian jessie

Hi all, the throughput measured by netperf differs from time to time. The changeset was xen-unstable.hg C/S 11760. This is observed when I executed a netperf on DomU connecting to a netserver on Dom0 in the same box. The observed throughput was between 185Mbps to 3854Mbps. I have never seen such a difference on ia64. Regards, Hiroya _______________________________________________ Xen-devel

Hey, I was running some benchmarks (netserver/netperf) where the init script just launched the netserver and nothing else and was concerned to see the performance not up to par. This was an HVM guest running with PV drivers. If I compile the kernel without CONFIG_FUNCTION_TRACER it is much better - but it was my understanding that the tracing code does not impact the machine unless it is

I have just migrated to a new server and have Samba ver 3.0.12-5-SuSe running on a small network ( 7 win 98pcs) Logins are possible from all clients but morning logins (after client reboot) are delayed. It can take 2 or 3 attempts to successfully login. At each failed attempt the hour glass sits there for 30 seconds or so. logins usually succeed on the second or third attempt. I have searched

I would think someone would have noticed this in RHEL or CentOS if it was a pure kernel problem. What all are you running in the way of daemons? Something there could be to blame, no? Also, if the servers are identical in terms of software and hardware, have you considered a memory check? When I made the switch from Windows to Linux I discovered something interesting. Since Linux caches memory (as

Hi All, We're implementing a fully integrated Samba setup with the Active directory on IBM AIX. From AIX level we have established the single sign on against Windows AD 2012R2. Currently the following user accounts and groups exists on the AD domain. # cat /etc/samba/smb.conf [global] security = ADS workgroup = PAPERCLIP realm = PAPERCLIP.SC.NZ

First,sorry my poor english~ Here is this test: Virtualization performance comparison test Test environment Physical machine: Cpu 8-core 8G memory HDD: 147G xen virtual machine: cpu 2 core 4G memory 30G hard drive wmware virtual machine: cpu 2 core 4G memory 30G hard drive Optical disk array (san) Size: 7.7T Speed: 6G/sec Testing and structural I / 0 performance test Test methods Test

I've read the documentation that domain trusts should be fully supported with both Kerberos and NTLM authentication. I've created a new 2016 domain on a Windows box and created a Samba domain on a Linux box with a BIND9_DLZ backend. Both servers can resolve both DNS domains forwards and backwards and I am able to connect a Windows 10 client to the Samba domain without any issues. The

the only thing to happen has been the server has had the patch for the windows rpc problem now the responce to a command that has worked perfectly for weeks of testing doesn't ************ work anymore. instead it spews this out [2003/08/08 11:50:31, 0] libsmb/namequery.c:getlmhostsent(588) getlmhostsent: Ill formed hosts line [ > lots of random signs rpcclient vomits this out

Estimados erreros, Estoy intentando entender como calcula el paquete dismo ( https://cran.r-project.org/web/packages/dismo/index.html) un coeficiente de variación. Os pongo un ejemplo: tmin <- c(10,12,14,16,18,20,22,21,19,17,15,12) # temperatura mínima media mensual de un año tmax <- tmin + 5 # temperatura máxima media mensual de un año prec <- c(0,2,10,30,80,160,80,20,40,60,20,0)

Hi All, I have some old HP Netserver LPr?s that have old HP RAID controllers (NetRAID 3si?s). The RAID controllers don?t work too well with CentOS. I?ve not been able to get the installer to see the controllers. I?ve read a lot of notes that don?t seem to point to me having any success. So 2 questions. Has anyone successfully used NetRAID 3si controllers with CentOS? Can anyone recommend an

Hi all, Trying to boot a server with the CentOS 4.4 LiveCD (have a crashed HD that I am trying to recover data from). The CD boots fine, gets past asking for the keyboard type, then asks for a password. It will stay at the login prompt for a few seconds, then whether I type anything or not, it gives a fast error message, something about mixer not attached (it goes by too fast to read the

Does anyone have pointers on how this should be done? Or even better if someone has sample config files for Windows configuration. I am using it in netserver mode. Just tried it but it seems upsmon can't connect saying ACCESS DENIED if I run it with upsmon -DDDD on the master itself.

Hi list, I'm about to install Asterisk on an Old HP NetServer LC2000 Server (year 2001), it has 2 Pentium III 1GHz CPUs (Coppermine FSB 133MHz 256K L2 Cache), 768MB PC-133 ECC RAM, 3 UltraSCSI LVD2 18.2GB 10K RPM HDD in RAID5, 100Mb NIC for server. This Server will support 35 SIP phones (users) and 10 FXO ports (for telco lines) and 2 FXS ports (internal analog phones) with a Sangoma Remora